Nanostructural Sc-based hierarchy to improve the creep resistance of Al-Cu alloys

Al-2.5 wt% Cu alloys with different Sc additions (0, 0.1, 0.3, 0.5 wt%) are studied in comparison to reveal the Sc microalloying effect on precipitation, room temperature mechanical properties, and creep resistance. The results show that the Sc addition into the Al-Cu alloys can effectively promote the precipitation of theta'-Al2Cu, reducing the size and narrow the size distribution. However, the Sc-dependences of mechanical properties at room and at high temperatures are much different. Although the 0.3 wt% Sc addition results in the densest homogeneous theta'-Al2Cu precipitation and hence the highest room temperature strength, the 0.5 wt% addition leads to the most improved creep resistance at 300 degrees C that is derived from a nanostructural Sc-based hierarchy, i.e., Al3Sc dispersoid/heterogeneous theta'-Al2Cu precipitate units, homogeneous theta'-Al2Cu precipitates, strongest Sc segregation at theta'/matrix interfaces, and Sc clusters. The nanostructural hierarchy with thermally resistant nanostructural features at different length scales provides a new way to develop advanced Al alloys with excellent high-temperature stability and mechanical properties. The strengthening mechanisms at room and high temperatures are respectively discussed. (c) 2019 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).