相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Mesoporous activated carbon-zeolite composite prepared from waste macadamia nut shell and synthetic faujasite
Surachai Wongcharee et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2019)
A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
Zengguang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials
Nadir Ayrilmis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Analytical study on the 3D-printed structure and mechanical properties of basalt fiber-reinforced PLA composites using X-ray microscopy
Siwon Yu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Effect of Alkaline Treatment on Mechanical, Physical and Thermal Properties of Roselle/Sugar Palm Fiber Reinforced Thermoplastic Polyurethane Hybrid Composites
A. M. Radzi et al.
FIBERS AND POLYMERS (2019)
Effect of Impregnation of Biodegradable Polyesters with Polyphenols from Cistus linnaeus and Juglans regia Linnaeus Walnut Green Husk
Malgorzata Latos-Brozio et al.
POLYMERS (2019)
Engineering a multifunctional 3D-printed PLA-collagen-minocycline-nanoHydroxyapatite scaffold with combined antimicrobial and osteogenic effects for bone regeneration
Victor Martin et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Fused Deposition Modeling of Poly (Lactic Acid)/Walnut Shell Biocomposite Filaments-Surface Treatment and Properties
Xiaohui Song et al.
APPLIED SCIENCES-BASEL (2019)
O Mechanical characterization of 3D-printed polymers
John Ryan C. Dizon et al.
ADDITIVE MANUFACTURING (2018)
Rethinking Timber: Investigation into the Use of Waste Macadamia Nut Shells for Additive Manufacturing
Jordan Girdis et al.
JOM (2017)
A review on new bio-based constituents for natural fiber-polymer composites
Taneli Vaisanen et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Mechanical properties of Macadamia nutshell powder and PLA bio-composites
Chensong Dong et al.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2017)
3D-printed scaffolds with synergistic effect of hollow-pipe structure and bioactive ions for vascularized bone regeneration
Wenjie Zhang et al.
BIOMATERIALS (2017)
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Yubo Tao et al.
MATERIALS (2017)
Production and 3D printing processing of bio-based thermoplastic filament
Eleni Gkartzou et al.
MANUFACTURING REVIEW (2017)
Effects of Alkali and Alkali/Silane Treatments of Corn Fibers on Mechanical and Thermal Properties of Its Composites With Polylactic Acid
Honglin Luo et al.
POLYMER COMPOSITES (2016)
Pyrolysis investigation of food wastes by TG-MS-DSC technique
Allouch Malika et al.
BIOMASS CONVERSION AND BIOREFINERY (2016)
Experimental and theoretical investigation of prestressed natural fiber-reinforced polylactic acid (PLA) composite materials
Sean A. Hinchcliffe et al.
COMPOSITES PART B-ENGINEERING (2016)
3D printing with polymers: Challenges among expanding options and opportunities
Jeffrey W. Stansbury et al.
DENTAL MATERIALS (2016)
Effect of Surface Treatment of Jute Fibers on the Interfacial Adhesion in Poly(lactic acid)/Jute Fiber Biocomposites
Mohammad Tahir Zafar et al.
FIBERS AND POLYMERS (2016)
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Ryosuke Matsuzaki et al.
SCIENTIFIC REPORTS (2016)
Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications
Song XiaoHui et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Macadamia Nutshell Powder Filled Poly Lactic Acid Composites with Triacetin as a Plasticizer
Rakesh Kumar et al.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2013)
Bio-composites based on polypropylene reinforced with Almond Shells particles: Mechanical and thermal properties
H. Essabir et al.
MATERIALS & DESIGN (2013)
Macadamia (Macadamia integrifolia) shell and castor (Ricinos communis) oil based sustainable particleboard: A comparison of its properties with conventional wood based particleboard
A. Wechsler et al.
MATERIALS & DESIGN (2013)
Flexural properties of macadamia nutshell particle reinforced polyester composites
Chensong Dong et al.
COMPOSITES PART B-ENGINEERING (2012)
Biocomposites reinforced with natural fibers: 2000-2010
Omar Faruk et al.
PROGRESS IN POLYMER SCIENCE (2012)
Effect of various chemical treatments on the fibre structure and tensile properties of industrial hemp fibres
Moyeenuddin A. Sawpan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Pretreatments of Natural Fibers and their Application as Reinforcing Material in Polymer Composites-A Review
Susheel Kalia et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Influence of various chemical treatments on the composition and structure of hemp fibres
Marianne Le Troedec et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers
Masud S. Huda et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Fabrication of porous bioactive structures using the selective laser sintering technique
M. M. Savalani et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2007)
Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)
AP Mathew et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
分享论文
