相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Additive Engineering for Efficient and Stable Perovskite Solar Cells
Fei Zhang et al.
ADVANCED ENERGY MATERIALS (2020)
Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures
Mark V. Khenkin et al.
NATURE ENERGY (2020)
Inhomogeneous Doping of Perovskite Materials by Dopants from Hole-Transport Layer
Chuanxiao Xiao et al.
MATTER (2020)
Halide Perovskites: Is It All about the Interfaces?
Philip Schulz et al.
CHEMICAL REVIEWS (2019)
Ultrahigh Durability Perovskite Solar Cells
Congcong Wu et al.
NANO LETTERS (2019)
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Eui Hyuk Jung et al.
NATURE (2019)
Effects of methylammonium acetate on the perovskite film quality for the perovskite solar cell
Yaoming Xiao et al.
ORGANIC ELECTRONICS (2019)
Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites
Juan-Pablo Correa-Baena et al.
SCIENCE (2019)
Methylammonium acetate as an additive to improve performance and eliminate J-V hysteresis in 2D homologous organic-inorganic perovskite solar cells
Xiaoliang Yan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
A chemically inert bismuth interlayer enhances long-term stability of inverted perovskite solar cells
Shaohang Wu et al.
NATURE COMMUNICATIONS (2019)
Efficient Defect Passivation for Perovskite Solar Cells by Controlling the Electron Density Distribution of Donor-π-Acceptor Molecules
Tianhao Wu et al.
ADVANCED ENERGY MATERIALS (2019)
New tolerance factor to predict the stability of perovskite oxides and halides
Christopher J. Bartel et al.
SCIENCE ADVANCES (2019)
Bilateral alkylamine for suppressing charge recombination and improving stability in blade-coated perovskite solar cells
Wu-Qiang Wu et al.
SCIENCE ADVANCES (2019)
Stability of Cubic FAPbI3 from X-ray Diffraction, Anelastic, and Dielectric Measurements
Francesco Cordero et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)
Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells
Jinhui Tong et al.
SCIENCE (2019)
Water in hybrid perovskites: Bulk MAPbI3 degradation via super-hydrous state
Arvin Kakekhani et al.
APL MATERIALS (2019)
Perovskite Thin Film Materials Stabilized and Enhanced by Zinc(II) Doping
Arjaan Kooijman et al.
APPLIED SCIENCES-BASEL (2019)
Oligomeric Silica-Wrapped Perovskites Enable Synchronous Defect Passivation and Grain Stabilization for Efficient and Stable Perovskite Photovoltaics
Yang Bai et al.
ACS ENERGY LETTERS (2019)
Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells
Nengxu Li et al.
NATURE ENERGY (2019)
Amphiphilic Fullerenes Employed to Improve the Quality of Perovskite Films and the Stability of Perovskite Solar Cells
Qingxia Fu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Tailored Phase Transformation of CsPbI2Br Films by Copper(II) Bromide for High-Performance All-Inorganic Perovskite Solar Cells
Kai-Li Wang et al.
NANO LETTERS (2019)
Planar perovskite solar cells with long-term stability using ionic liquid additives
Sai Bai et al.
NATURE (2019)
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Shuang Yang et al.
SCIENCE (2019)
Effects of thiourea on the perovskite crystallization for fully printable solar cells
Song-Guk Ko et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
NaI Doping Effect on Photophysical Properties of Organic-Lead-Halide Perovskite Thin Films by Using Solution Process
Chuangchuang Chang et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2019)
Goldschmidt-rule-deviated perovskite CsPbIBr2by barium substitution for efficient solar cells
Waqas Siddique Subhani et al.
NANO ENERGY (2019)
Two-Dimensional Material Interface Engineering for Efficient Perovskite Large-Area Modules
Antonio Agresti et al.
ACS ENERGY LETTERS (2019)
Performance of perovskite solar cells under simulated temperature-illumination real-world operating conditions
Wolfgang Tress et al.
NATURE ENERGY (2019)
Impact of Titanium Dioxide Surface Defects on the Interfacial Composition and Energetics of Evaporated Perovskite Active Layers
R. Clayton Shallcross et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Energetics, Structures, and Phase Transitions of Cubic and Orthorhombic Cesium Lead Iodide (CsPbI3) Polymorphs
Bin Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide
Hanul Min et al.
SCIENCE (2019)
Enhanced Nucleation of Atomic Layer Deposited Contacts Improves Operational Stability of Perovskite Solar Cells in Air
James A. Raiford et al.
ADVANCED ENERGY MATERIALS (2019)
Substrate-Dependent Photoconductivity Dynamics in a High-Efficiency Hybrid Perovskite Alloy
Ali Moeed Tirmzi et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2019)
Solar cell efficiency tables (Version 53)
Martin A. Green et al.
PROGRESS IN PHOTOVOLTAICS (2019)
A Eu3+-Eu2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells
Ligang Wang et al.
SCIENCE (2019)
Synergistic Crystal and Interface Engineering for Efficient and Stable Perovskite Photovoltaics
Mohammad Mahdi Tavakoli et al.
ADVANCED ENERGY MATERIALS (2019)
Thermally Stable Perovskite Solar Cells by Systematic Molecular Design of the Hole-Transport Layer
Tracy H. Schloemer et al.
ACS ENERGY LETTERS (2019)
Encapsulation of Printable Mesoscopic Perovskite Solar Cells Enables High Temperature and Long-Term Outdoor Stability
Zhengyang Fu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
A Review of Perovskites Solar Cell Stability
Rui Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Imperfections and their passivation in halide perovskite solar cells
Bo Chen et al.
CHEMICAL SOCIETY REVIEWS (2019)
A C60/TiOx bilayer for conformal growth of perovskite films for UV stable perovskite solar cells
Cheng Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Interfacial charge-transfer doping of metal halide perovskites for high performance photovoltaics
Nakita K. Noel et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Caffeine Improves the Performance and Thermal Stability of Perovskite Solar Cells
Rui Wang et al.
JOULE (2019)
Enabling Flexible All-Perovskite Tandem Solar Cells
Axel F. Palmstrom et al.
JOULE (2019)
The phase diagram of a mixed halide (Br, I) hybrid perovskite obtained by synchrotron X-ray diffraction
Frederike Lehmann et al.
RSC ADVANCES (2019)
Insights into operational stability and processing of halide perovskite active layers
Laura T. Schelhas et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Interfacial Effects during Rapid Lamination within MAPbI3 Thin Films and Solar Cells
Wiley A. Dunlap-Shohl et al.
ACS APPLIED ENERGY MATERIALS (2019)
Efficient Perovskite Solar Cell Modules with High Stability Enabled by Iodide Diffusion Barriers
Enbing Bi et al.
JOULE (2019)
Crystal Structure Evolution and Notable Thermal Expansion in Hybrid Perovskites Formamidinium Tin Iodide and Formamidinium Lead Bromide
Emily C. Schueller et al.
INORGANIC CHEMISTRY (2018)
Reverse Bias Behavior of Halide Perovskite Solar Cells
Andrea R. Bowring et al.
ADVANCED ENERGY MATERIALS (2018)
Effect of Cation Composition on the Mechanical Stability of Perovskite Solar Cells
Nicholas Rolston et al.
ADVANCED ENERGY MATERIALS (2018)
Formation and Diffusion of Metal Impurities in Perovskite Solar Cell Material CH3NH3PbI3: Implications on Solar Cell Degradation and Choice of Electrode
Wenmei Ming et al.
ADVANCED SCIENCE (2018)
Incorporating 4-tert-Butylpyridine in an Antisolvent: A Facile Approach to Obtain Highly Efficient and Stable Perovskite Solar Cells
Ya-Han Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Temperature Variation-Induced Performance Decline of Perovskite Solar Cells
Jonas A. Schwenzer et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Enhancing Moisture and Water Resistance in Perovskite Solar Cells by Encapsulation with Ultrathin Plasma Polymers
Jesus Idigoras et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Magnesium-Doped MAPbI(3) Perovskite Layers for Enhanced Photovoltaic Performance in Humid Air Atmosphere
Fu Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Low-Temperature Atomic Layer Deposition of Metal Oxide Layers for Perovskite Solar Cells with High Efficiency and Stability under Harsh Environmental Conditions
Yifan Lv et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Thermal Stability of Mixed Cation Metal Halide Perovskites in Air
Wanliang Tang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
[6,6]-Phenyl-C-61-Butyric Acid Methyl Ester/Cerium Oxide Bilayer Structure as Efficient and Stable Electron Transport Layer for Inverted Perovskite Solar Cells
Rui Fang et al.
ACS NANO (2018)
Dedoping of Lead Halide Perovskites Incorporating Monovalent Cations
Mojtaba Abdi-Jalebi et al.
ACS NANO (2018)
Humidity-Induced Degradation via Grain Boundaries of HC(NH2)2PbI3 Planar Perovskite Solar Cells
Jae Sung Yun et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
What Remains Unexplained about the Properties of Halide Perovskites?
David A. Egger et al.
ADVANCED MATERIALS (2018)
Polymer-Passivated Inorganic Cesium Lead Mixed-Halide Perovskites for Stable and Efficient Solar Cells with High Open-Circuit Voltage over 1.3 V
Qingsen Zeng et al.
ADVANCED MATERIALS (2018)
Reconsidering figures of merit for performance and stability of perovskite photovoltaics
Mark V. Khenkin et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Intrinsic Point Defects in Inorganic Cesium Lead Iodide Perovskite CsPbI3
Yang Huang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
First-Principles Modeling of Bismuth Doping in the MAPbI(3) Perovskite
Edoardo Mosconi et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Additive Selection Strategy for High Performance Perovskite Photovoltaics
Guifang Han et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Photoluminescence and Photoconductivity to Assess Maximum Open-Circuit Voltage and Carrier Transport in Hybrid Perovskites and Other Photovoltaic Materials
Ian L. Braly et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)
Tuning Molecular Interactions for Highly Reproducible and Efficient Formamidinium Perovskite Solar Cells via Adduct Approach
Jin-Wook Lee et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Mojtaba Abdi-Jalebi et al.
NATURE (2018)
Large tunable photoeffect on ion conduction in halide perovskites and implications for photodecomposition
Gee Yeong Kim et al.
NATURE MATERIALS (2018)
First-principles study of intrinsic defects in formamidinium lead triiodide perovskite solar cell absorbers
Na Liu et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)
Outdoor performance monitoring of perovskite solar cell mini-modules: Diurnal performance, observance of reversible degradation and variation with climatic performance
V Stoichkov et al.
SOLAR ENERGY (2018)
Surface Electronic Modification of Perovskite Thin Film with Water-Resistant Electron Delocalized Molecules for Stable and Efficient Photovoltaics
Tian Yu Wen et al.
ADVANCED ENERGY MATERIALS (2018)
Fused-Ring Electron Acceptor ITIC-Th: A Novel Stabilizer for Halide Perovskite Precursor Solution
Minchao Qin et al.
ADVANCED ENERGY MATERIALS (2018)
Highly (100)-oriented CH3NH3PbI3(Cl) perovskite solar cells prepared with NH4Cl using an air blow method
Takeo Oku et al.
RSC ADVANCES (2018)
Suppressing defects through thiadiazole derivatives that modulate CH3NH3PbI3 crystal growth for highly stable perovskite solar cells under dark conditions
Hongwei Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Photodecomposition and thermal decomposition in methylammonium halide lead perovskites and inferred design principles to increase photovoltaic device stability
Emilio J. Juarez-Perez et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Microstructures, optical and photovoltaic properties of CH3NH3PbI3(1-x)Clx perovskite films with CuSCN additive
Yasuhiro Shirahata et al.
MATERIALS RESEARCH EXPRESS (2018)
Curtailing Perovskite Processing Limitations via Lamination at the Perovskite/Perovskite Interface
Sean P. Dunfield et al.
ACS ENERGY LETTERS (2018)
Controlling Thin-Film Stress and Wrinkling during Perovskite Film Formation
Kevin A. Bush et al.
ACS ENERGY LETTERS (2018)
Cubic or Orthorhombic? Revealing the Crystal Structure of Metastable Black-Phase CsPbl3 by Theory and Experiment
Rebecca J. Sutton et al.
ACS ENERGY LETTERS (2018)
Barrier Design to Prevent Metal-Induced Degradation and Improve Thermal Stability in Perovskite Solar Cells
Caleb C. Boyd et al.
ACS ENERGY LETTERS (2018)
Highly Efficient Perovskite Solar Modules by Scalable Fabrication and Interconnection Optimization
Mengjin Yang et al.
ACS ENERGY LETTERS (2018)
A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells
Nam Joong Jeon et al.
NATURE ENERGY (2018)
Enabling reliability assessments of pre-commercial perovskite photovoltaics with lessons learned from industrial standards
Henry J. Snaith et al.
NATURE ENERGY (2018)
Tailored interfaces of unencapsulated perovskite solar cells for > 1,000 hour operational stability
Jeffrey A. Christians et al.
NATURE ENERGY (2018)
Scalable fabrication of perovskite solar cells
Zhen Li et al.
NATURE REVIEWS MATERIALS (2018)
Encapsulating perovskite solar cells to withstand damp heat and thermal cycling
Rongrong Cheacharoen et al.
SUSTAINABLE ENERGY & FUELS (2018)
Thermally stable, planar hybrid perovskite solar cells with high efficiency
Kyoungwon Choi et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Pyridine solvent engineering for high quality anion-cation-mixed hybrid and high performance of perovskite solar cells
Xuping Liu et al.
JOURNAL OF POWER SOURCES (2018)
Two-Dimensional Ruddlesden-Popper Perovskite with Nanorod-like Morphology for Solar Cells with Efficiency Exceeding 15%
Hongtao Lai et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)
2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Jin-Wook Lee et al.
NATURE COMMUNICATIONS (2018)
Gas-solid reaction based over one-micrometer thick stable perovskite films for efficient solar cells and modules
Zonghao Liu et al.
NATURE COMMUNICATIONS (2018)
Engineering Stress in Perovskite Solar Cells to Improve Stability
Nicholas Rolston et al.
ADVANCED ENERGY MATERIALS (2018)
Lewis-Adduct Mediated Grain-Boundary Functionalization for Efficient Ideal-Bandgap Perovskite Solar Cells with Superior Stability
Yingxia Zong et al.
ADVANCED ENERGY MATERIALS (2018)
A full overview of international standards assessing the long-term stability of perovskite solar cells
Philippe Holzhey et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Stability at Scale: Challenges of Module Interconnects for Perovskite Photovoltaics
Jeffrey A. Christians et al.
ACS ENERGY LETTERS (2018)
Stability in Perovskite Photovoltaics: A Paradigm for Newfangled Technologies
Jeffrey A. Christians et al.
ACS ENERGY LETTERS (2018)
Two-Dimensional Perovskite Solar Cells with 14.1% Power Conversion Efficiency and 0.68% External Radiative Efficiency
Weifei Fu et al.
ACS ENERGY LETTERS (2018)
High-efficiency large-area perovskite photovoltaic modules achieved via electrochemically assembled metal-filamentary nanoelectrodes
Soonil Hong et al.
SCIENCE ADVANCES (2018)
Highly Efficient Perovskite Solar Cells via Nickel Passivation
Xiu Gong et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Tailored Phase Conversion under Conjugated Polymer Enables Thermally Stable Perovskite Solar Cells with Efficiency Exceeding 21%
Lei Meng et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)
Polymeric Surface Modification of NiOx-Based Inverted Planar Perovskite Solar Cells with Enhanced Performance
Yawen Du et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Increasing markets and decreasing package weight for high-specific-power photovoltaics
Matthew O. Reese et al.
NATURE ENERGY (2018)
High performance ambient-air-stable FAPbI3 perovskite solar cells with molecule-passivated Ruddlesden-Popper/3D heterostructured film
Tianqi Niu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Outdoor Measurement and Modeling of Perovskite Module Temperatures
Robert Gehlhaar et al.
GLOBAL CHALLENGES (2018)
Effect of non-stoichiometric solution chemistry on improving the performance of wide-bandgap perovskite solar cells
Mengjin Yang et al.
MATERIALS TODAY ENERGY (2018)
Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells
Hua Dong et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Excellent Stability of Perovskite Solar Cells by Passivation Engineering
Lili Gao et al.
SOLAR RRL (2018)
Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells
Fei Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the ACation and XAnion
Ze Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Highly Efficient and Stable Perovskite Solar Cells Based on Monolithically Grained CH3NH3PbI3 Film
Chengbin Fei et al.
ADVANCED ENERGY MATERIALS (2017)
Quantification of light-enhanced ionic transport in lead iodide perovskite thin films and its solar cell applications
Yi-Cheng Zhao et al.
LIGHT-SCIENCE & APPLICATIONS (2017)
Effect of channel aspect ratio on chemical recuperation process in advanced aeroengines
Silong Zhang et al.
ENERGY (2017)
Additive engineering for high-performance room-temperature-processed perovskite absorbers with micron-size grains and microsecond-range carrier lifetimes
Qiwei Han et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
High-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture
Dibyashree Koushik et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Potential-induced degradation in photovoltaic modules: a critical review
Wei Luo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Multinuclear Magnetic Resonance Tracking of Hydro, Thermal, and Hydrothermal Decomposition of CH3NH3PbI3
Abdelrahman M. Askar et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
High Defect Tolerance in Lead Halide Perovskite CsPbBr3
Jun Kang et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)
A Breakthrough Efficiency of 19.9% Obtained in Inverted Perovskite Solar Cells by Using an Efficient Trap State Passivator Cu(thiourea)I
Senyun Ye et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Band Gap Tuning via Lattice Contraction and Octahedral Tilting in Perovskite Materials for Photovoltaics
Rohit Prasanna et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Improved efficiency of perovskite photovoltaics based on Ca-doped methylammonium lead halide
Ming-Chung Wu et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)
Origin of Reversible Photoinduced Phase Separation in Hybrid Perovskites
Connor G. Bischak et al.
NANO LETTERS (2017)
C60 additive-assisted crystallization in CH3NH3Pb0.75Sn0.25I3 perovskite solar cells with high stability and efficiency
Chong Liu et al.
NANOSCALE (2017)
A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells
Yi Hou et al.
SCIENCE (2017)
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Hairen Tan et al.
SCIENCE (2017)
Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%
Neha Arora et al.
SCIENCE (2017)
One-Year stable perovskite solar cells by 2D/3D interface engineering
G. Grancini et al.
NATURE COMMUNICATIONS (2017)
In situ click chemistry generation of cyclooxygenase-2 inhibitors
Atul Bhardwaj et al.
NATURE COMMUNICATIONS (2017)
Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells
Nicholas Aristidou et al.
NATURE COMMUNICATIONS (2017)
Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells
Yaoguang Rong et al.
NATURE COMMUNICATIONS (2017)
Direct Evidence of Ion Diffusion for the Silver-Electrode-Induced Thermal Degradation of Inverted Perovskite Solar Cells
Jiangwei Li et al.
ADVANCED ENERGY MATERIALS (2017)
Improved stability and efficiency of perovskite solar cells with submicron flexible barrier films deposited in air
Nicholas Rolston et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Management of perovskite intermediates for highly efficient inverted planar heterojunction perovskite solar cells
Yingdong Xia et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Enhancing perovskite solar cell performance and stability by doping barium in methylammonium lead halide
Shun-Hsiang Chan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Effects of organic cations on the defect physics of tin halide perovskites
Tingting Shi et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Tuning the crystal growth of perovskite thin-films by adding the 2-pyridylthiourea additive for highly efficient and stable solar cells prepared in ambient air
Mengna Sun et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Guanidinium thiocyanate selective Ostwald ripening induced large grain for high performance perovskite solar cells
Ngoc Duy Pham et al.
NANO ENERGY (2017)
Efficient planar perovskite solar cells using halide Sr-substituted Pb perovskite
Xuxia Shai et al.
NANO ENERGY (2017)
Mechanism of Tin Oxidation and Stabilization by Lead Substitution in Tin Halide Perovskites
Tomas Leijtens et al.
ACS ENERGY LETTERS (2017)
Perovskite Photovoltaics: The Path to a Printable Terawatt-Scale Technology
Joseph J. Berry et al.
ACS ENERGY LETTERS (2017)
High-Efficiency Rubidium-Incorporated Perovskite Solar Cells by Gas Quenching
Meng Zhang et al.
ACS ENERGY LETTERS (2017)
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Kevin A. Bush et al.
NATURE ENERGY (2017)
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Mengjin Yang et al.
NATURE ENERGY (2017)
Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells
Jingjing Zhao et al.
SCIENCE ADVANCES (2017)
A study on the nature of the thermal decomposition of methylammonium lead iodide perovskite, CH3NH3PbI3: an attempt to rationalise contradictory experimental results
Alessandro Latini et al.
SUSTAINABLE ENERGY & FUELS (2017)
Investigation of Thermally Induced Degradation in CH3NH3PbI3 Perovskite Solar Cells using in-situ Synchrotron Radiation Analysis
Nam-Koo Kim et al.
SCIENTIFIC REPORTS (2017)
Layer-by-Layer Degradation of Methylammonium Lead Tri-iodide Perovskite Microplates
Zheng Fan et al.
JOULE (2017)
Planar-Structure Perovskite Solar Cells with Efficiency beyond 21%
Qi Jiang et al.
ADVANCED MATERIALS (2017)
Enhanced Performance of Perovskite Solar Cells with Zinc Chloride Additives
Junjie Jin et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Towards Extending Solar Cell Lifetimes: Addition of a Fluorous Cation to Triple Cation-Based Perovskite Films
Manuel Salado et al.
CHEMSUSCHEM (2017)
High Tolerance to Iron Contamination in Lead Halide Perovskite Solar Cells
Jeremy R. Poindexter et al.
ACS NANO (2017)
Isomer-Pure Bis-PCBM-Assisted Crystal Engineering of Perovskite Solar Cells Showing Excellent Efficiency and Stability
Fei Zhang et al.
ADVANCED MATERIALS (2017)
Metal Acetylacetonate Series in Interface Engineering for Full Low-Temperature-Processed, High-Performance, and Stable Planar Perovskite Solar Cells with Conversion Efficiency over 16% on 1 cm2 Scale
Wei Chen et al.
ADVANCED MATERIALS (2017)
Stable Large-Area (10 x 10 cm2) Printable Mesoscopic Perovskite Module Exceeding 10% Efficiency
Yue Hu et al.
SOLAR RRL (2017)
Stabilizing Perovskite Structures by Tuning Tolerance Factor: Formation of Formamidinium and Cesium Lead Iodide Solid-State Alloys
Zhen Li et al.
CHEMISTRY OF MATERIALS (2016)
Beneficial Effects of PbI2 Incorporated in Organo-Lead Halide Perovskite Solar Cells
Young Chan Kim et al.
ADVANCED ENERGY MATERIALS (2016)
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Konrad Domanski et al.
ACS NANO (2016)
Employing Lead Thiocyanate Additive to Reduce the Hysteresis and Boost the Fill Factor of Planar Perovskite Solar Cells
Weijun Ke et al.
ADVANCED MATERIALS (2016)
Extending the Lifetime of Perovskite Solar Cells using a Perfluorinated Dopant
Manuel Salado et al.
CHEMSUSCHEM (2016)
Hydrogen Bonding and Stability of Hybrid Organic-Inorganic Perovskites
Fedwa El-Mellouhi et al.
CHEMSUSCHEM (2016)
Encapsulation of Perovskite Solar Cells for High Humidity Conditions
Qi Dong et al.
CHEMSUSCHEM (2016)
Enhanced UV-light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification
Wenzhe Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
A large area (70 cm(2)) monolithic perovskite solar module with a high efficiency and stability
Anish Priyadarshi et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Thermal degradation of CH3NH3PbI3 perovskite into NH3 and CH3I gases observed by coupled thermogravimetry-mass spectrometry analysis
Emilio J. Juarez-Perez et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Structural and optical properties of methylammonium lead iodide across the tetragonal to cubic phase transition: implications for perovskite solar cells
Claudio Quarti et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells
Daniel Bryant et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Structural and chemical evolution of methylammonium lead halide perovskites during thermal processing from solution
David P. Nenon et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Light-induced annihilation of Frenkel defects in organo-lead halide perovskites
Edoardo Mosconi et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency
Michael Saliba et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Effect of Structural Phase Transition on Charge-Carrier Lifetimes and Defects in CH3NH3SnI3 Perovskite
Elizabeth S. Parrott et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)
Transformative Evolution of Organolead Triiodide Perovskite Thin Films from Strong Room-Temperature Solid-Gas Interaction between HPbl3-CH3NH2 Precursor Pair
Shuping Pang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Bulk heterojunction perovskite-PCBM solar cells with high fill factor
Chien-Hung Chiang et al.
NATURE PHOTONICS (2016)
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Federico Bella et al.
SCIENCE (2016)
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Michael Saliba et al.
SCIENCE (2016)
Ionic Liquid Control Crystal Growth to Enhance Planar Perovskite Solar Cells Efficiency
Ji-Youn Seo et al.
ADVANCED ENERGY MATERIALS (2016)
Impact of Monovalent Cation Halide Additives on the Structural and Optoelectronic Properties of CH3NH3PbI3 Perovskite
Mojtaba Abdi-Jalebi et al.
ADVANCED ENERGY MATERIALS (2016)
Thiocyanate assisted performance enhancement of formamidinium based planar perovskite solar cells through a single one-step solution process
Shida Yang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Rapid perovskite formation by CH3NH2 gas-induced intercalation and reaction of PbI2
Sonia R. Raga et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Minimal Effect of the Hole-Transport Material Ionization Potential on the Open-Circuit Voltage of Perovskite Solar Cells
Rebecca A. Belisle et al.
ACS ENERGY LETTERS (2016)
Redox Chemistry Dominates the Degradation and Decomposition of Metal Halide Perovskite Optoelectronic Devices
Lianfeng Zhao et al.
ACS ENERGY LETTERS (2016)
Defect Tolerance in Methylammonium Lead Triiodide Perovskite
K. Xerxes Steirer et al.
ACS ENERGY LETTERS (2016)
Light-Induced Phase Segregation in Halide-Perovskite Absorbers
Daniel J. Slotcavage et al.
ACS ENERGY LETTERS (2016)
Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Dae-Yong Son et al.
NATURE ENERGY (2016)
Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%
Dongqin Bi et al.
NATURE ENERGY (2016)
Entropy-driven structural transition and kinetic trapping in formamidinium lead iodide perovskite
Tianran Chen et al.
SCIENCE ADVANCES (2016)
Mechanical integrity of solution-processed perovskite solar cells
Nicholas Rolston et al.
EXTREME MECHANICS LETTERS (2016)
Enhancing Thermal Stability and Lifetime of Solid-State Dye-Sensitized Solar Cells via Molecular Engineering of the Hole-Transporting Material Spiro-OMeTAD
Tadas Malinauskas et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Reversible Hydration of CH3NH3Pbl3 in Films, Single Crystals, and Solar Cells
Aurelien M. A. Leguy et al.
CHEMISTRY OF MATERIALS (2015)
Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides
Xiong Li et al.
NATURE CHEMISTRY (2015)
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Dong Shi et al.
SCIENCE (2015)
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Wanyi Nie et al.
SCIENCE (2015)
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Eric T. Hoke et al.
CHEMICAL SCIENCE (2015)
Perovskite-fullerene hybrid materials suppress hysteresis in planar diodese
Jixian Xu et al.
NATURE COMMUNICATIONS (2015)
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Bert Conings et al.
ADVANCED ENERGY MATERIALS (2015)
Stability of Metal Halide Perovskite Solar Cells
Tomas Leijtens et al.
ADVANCED ENERGY MATERIALS (2015)
Improved environmental stability of organic lead trihalide perovskite-based photoactive-layers in the presence of mesoporous TiO2
Flannan T. F. O'Mahony et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Silver Iodide Formation in Methyl Ammonium Lead Iodide Perovskite Solar Cells with Silver Top Electrodes
Yuichi Kato et al.
ADVANCED MATERIALS INTERFACES (2015)
Outdoor Performance and Stability under Elevated Temperatures and Long-Term Light Soaking of Triple-Layer Mesoporous Perovskite Photovoltaics
Xiong Li et al.
ENERGY TECHNOLOGY (2015)
Ionic liquid-assisted growth of methylammonium lead iodide spherical nanoparticles by a simple spin-coating method and photovoltaic properties of perovskite solar cells
M. Shahiduzzaman et al.
RSC ADVANCES (2015)
Enhanced Photoluminescence and Solar Cell Performance via Lewis Base Passivation of Organic Inorganic Lead Halide Perovskites
Nakita K. Noel et al.
ACS NANO (2014)
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Wan-Jian Yin et al.
APPLIED PHYSICS LETTERS (2014)
Influence of Defects and Synthesis Conditions on the Photovoltaic Performance of Perovskite Semiconductor CsSnl3
Peng Xu et al.
CHEMISTRY OF MATERIALS (2014)
Thermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters
Amalie Dualeh et al.
CHEMISTRY OF MATERIALS (2014)
Effects of Surface Blocking Layer of Sb2S3 on Nanocrystalline TiO2 for CH3NH3PbI3 Perovskite Solar Cells
Seigo Ito et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
CH3NH3Cl-Assisted One-Step Solution Growth of CH3NH3Pbl3: Structure, Charge-Carrier Dynamics, and Photovoltaic Properties of Perovskite Solar Cells
Yixin Zhao et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Carbon Nanotube/Polymer Composites as a Highly Stable Hole Collection Layer in Perovskite Solar Cells
Severin N. Habisreutinger et al.
NANO LETTERS (2014)
Controllable Self-Induced Passivation of Hybrid Lead Iodide Perovskites toward High Performance Solar Cells
Qi Chen et al.
NANO LETTERS (2014)
An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive
Chuantian Zuo et al.
NANOSCALE (2014)
Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells
Nam Joong Jeon et al.
NATURE MATERIALS (2014)
Substrate-controlled band positions in CH3NH3Pbl3 perovskite films
Elisa M. Miller et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Evaluation of moisture ingress from the perimeter of photovoltaic modules
Michael D. Kempe et al.
PROGRESS IN PHOTOVOLTAICS (2014)
Perovskite processing for photovoltaics: a spectrothermal evaluation
Alice E. Williams et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Semiconducting Tin and Lead Iodide Perovskites with Organic Cations: Phase Transitions, High Mobilities, and Near-Infrared Photoluminescent Properties
Constantinos C. Stoumpos et al.
INORGANIC CHEMISTRY (2013)
Chemical Management for Colorful, Efficient, and Stable Inorganic-Organic Hybrid Nanostructured Solar Cells
Jun Hong Noh et al.
NANO LETTERS (2013)
Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells
Tomas Leijtens et al.
NATURE COMMUNICATIONS (2013)
Consensus stability testing protocols for organic photovoltaic materials and devices
Matthew O. Reese et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Akihiro Kojima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
History of Accelerated and Qualification Testing of Terrestrial Photovoltaic Modules: A Literature Review
C. R. Osterwald et al.
PROGRESS IN PHOTOVOLTAICS (2009)
TG-FTIR, DSC and quantum chemical studies of the thermal decomposition of quaternary methylammonium halides
Marlena Sawicka et al.
CHEMICAL PHYSICS (2006)
分享论文
