Experimental analysis and preliminary assessment of an integrated thermochemical process for production of low-molecular weight biofuels from municipal solid waste (MSW)

This work explores the use of advanced thermal technologies for the conversion of refuse derived fuel prepared from MSW into clean syngas suitable for catalytic transformation into light hydrocarbon products. In particular, the possibilities for the specific production of C1-C4 hydrocarbons utilising a good quality syngas produced by two-stage plasma assisted gasification method are investigated. A number of catalytic tests were prepared with modified chemistry to evaluate the preliminary component activities on real waste-derived syngas. C1-C4 paraffins formed in all cases as a main products, with different product distribution for different conditions examined (up to 95% bioSNG on hydrocarbon product for supported nickel, 40% bioLPG for Cu-Zn/ZSM-5 catalysts mix). CO2 was the main byproduct with outlet concentrations ranging from 10 to 50% in volume. When increasing H-2:CO in the syngas by external addition of hydrogen, CO conversion increases, as well as paraffin selectivity and hydrocarbons yield. Projections on a 65 MW thermal input bioSNG plant show that if 40 MW of electrical output from renewable sources are used to power a PEM stack during high power availability, the production of bioSNG could be increased by more than 33%, with a simultaneous reduction in CO2 emissions of more than 43%. (C) 2019 Elsevier Ltd. All rights reserved.