相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Evaluation of bone marrow stem cell response to PLA scaffolds manufactured by 3D printing and coated with polydopamine and type I collagen
Bruna Nunes Teixeira et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
Application of 3D printed ABS based conductive carbon black composite sensor in void fraction measurement
N. Jayanth et al.
COMPOSITES PART B-ENGINEERING (2019)
Single-step fabrication of electrochemical flow cells utilizing multi-material 3D printing
Glen D. O'Neil et al.
ELECTROCHEMISTRY COMMUNICATIONS (2019)
Development of 3D-printed PLGA/TiO2 nanocomposite scaffolds for bone tissue engineering applications
M. Rasoulianboroujeni et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Development of a gastroretentive delivery system for acyclovir by 3D printing technology and its in vivo pharmacokinetic evaluation in Beagle dogs
Soyoung Shin et al.
PLOS ONE (2019)
Machining performance of 3D-printed ABS electrode coated with copper in EDM
Ujwal A. Danade et al.
RAPID PROTOTYPING JOURNAL (2019)
On the additive manufacturing of an energy storage device from recycled material
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2019)
Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling
Johanna Aho et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
A Soft Wearable Robotic Ankle-Foot-Orthosis for Post-Stroke Patients
Junghan Kwon et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2019)
Development of low-cost customised hand prostheses by additive manufacturing
Daniel Ferreira et al.
PLASTICS RUBBER AND COMPOSITES (2018)
3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis
C. Lorena Manzanares Palenzuela et al.
ANALYTICAL CHEMISTRY (2018)
Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
Muzna Sadia et al.
JOURNAL OF CONTROLLED RELEASE (2018)
Biodegradable 3D printed polymer microneedles for transdermal drug delivery
Michael A. Luzuriaga et al.
LAB ON A CHIP (2018)
3D Printed Starmix Drug Loaded Dosage Forms for Paediatric Applications
Nicolaos Scoutaris et al.
PHARMACEUTICAL RESEARCH (2018)
Photolithography-free PDMS stamps for paper microdevice fabrication
R. Hunter Montgomery et al.
RAPID PROTOTYPING JOURNAL (2018)
Anodic stripping voltammetric determination of zinc at a 3-D printed carbon nanofiber-graphite-polystyrene electrode using a carbon pseudo-reference electrode
Kevin C. Honeychurch et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
ChuanYi Foo et al.
SCIENTIFIC REPORTS (2018)
Development of 3D-Printed Embedded Temperature Sensor for Both Terrestrial and Aquatic Environmental Monitoring Robots
Memoon Sajid et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2018)
Fused deposition modeling 3D printing of boron nitride composites for neutron radiation shielding
Smith Woosley et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Strain sensing behaviour of 3D printed carbon black filled ABS
Michael Dawoud et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Highly Loaded Graphite-Polylactic Acid Composite-Based Filaments for Lithium-Ion Battery Three-Dimensional Printing
Alexis Maurel et al.
CHEMISTRY OF MATERIALS (2018)
Effect of chemical treatment on tensile strength and surface roughness of 3D-printed ABS using the FDM process
N. Jayanth et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Electromagnetic interference shielding effectiveness of ABS carbon-based composites manufactured via fused deposition modelling
D. P. Schmitz et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling
K. Prashantha et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2017)
3D printed drug delivery devices: perspectives and technical challenges
Mirja Palo et al.
EXPERT REVIEW OF MEDICAL DEVICES (2017)
Design and optimization of prosthetic foot by using polylactic acid 3D printing
Zhen Tao et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
3D-printed poly(vinylidene fluoride)/carbon nanotube composites as a tunable, low-cost chemical vapour sensing platform
Z. C. Kennedy et al.
NANOSCALE (2017)
Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications
Jasgurpreet Singh Chohan et al.
RAPID PROTOTYPING JOURNAL (2017)
3D printing of multiaxial force sensors using carbon nanotube (CNT)/thermoplastic polyurethane (TPU) filaments
Kyuyoung Kim et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
3D printing of microfluidic devices with embedded sensing electrodes for generating and measuring the size of microdroplets based on contactless conductivity detection
Lucas C. Duarte et al.
SENSORS AND ACTUATORS B-CHEMICAL (2017)
4D Printing - Fused Deposition Modeling Printing with Thermal-Responsive Shape Memory Polymers
Son Thai Ly et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
A review of 4D printing
Farhang Momeni et al.
MATERIALS & DESIGN (2017)
3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
Josef F. Christ et al.
MATERIALS & DESIGN (2017)
A miniaturised 3D printed polypropylene reactor for online reaction analysis by mass spectrometry
Gianmario Scotti et al.
REACTION CHEMISTRY & ENGINEERING (2017)
3D Printed Graphene Based Energy Storage Devices
Christopher W. Foster et al.
SCIENTIFIC REPORTS (2017)
Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone
Xuyu Chai et al.
SCIENTIFIC REPORTS (2017)
Investigating the shape memory properties of 4D printed polylactic acid (PLA) and the concept of 4D printing onto nylon fabrics for the creation of smart textiles
Steven K. Leist et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Three-Dimensional Printed Shape Memory Objects Based on an Olefin lonomer of Zinc-Neutralized Poly(ethylene-co-emethacrylic acid)
Zhiyang Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms
Niall P. Macdonald et al.
ANALYTICAL CHEMISTRY (2017)
Simple, Expendable, 3D-Printed Microfluidic Systems for Sample Preparation of Petroleum
Erica M. Kataoka et al.
ANALYTICAL CHEMISTRY (2017)
Fabrication and optimisation of a fused filament 3D-printed microfluidic platform
A. M. Tothill et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)
Analysis of barriers to implement additive manufacturing technology in the Indian automotive sector
Gourav Dwivedi et al.
INTERNATIONAL JOURNAL OF PHYSICAL DISTRIBUTION & LOGISTICS MANAGEMENT (2017)
3D Printing technologies for drug delivery: a review
Leena Kumari Prasad et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2016)
3D-printed microfluidic devices: fabrication, advantages and limitations-a mini review
Chengpeng Chen et al.
ANALYTICAL METHODS (2016)
All-Polystyrene 3D-Printed Electrochemical Device with Embedded Carbon Nanofiber-Graphite-Polystyrene Composite Conductor
Zuhayr Rymansaib et al.
ELECTROANALYSIS (2016)
Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
Natalja Genina et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Three-Dimensional Printing of Prosthetic Hands for Children
Matthew B. Burn et al.
JOURNAL OF HAND SURGERY-AMERICAN VOLUME (2016)
Three-Dimensional Printed PCL-Based Implantable Prototypes of Medical Devices for Controlled Drug Delivery
Jenny Hollander et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
3D printing of versatile reactionware for chemical synthesis
Philip J. Kitson et al.
NATURE PROTOCOLS (2016)
A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release Tablets
Tochukwu C. Okwuosa et al.
PHARMACEUTICAL RESEARCH (2016)
Direct digital manufacturing of an accelerator pedal for a Formula Student racing car
Jorge Gonzalez Prada et al.
RAPID PROTOTYPING JOURNAL (2016)
Self-expanding/shrinking structures by 4D printing
M. Bodaghi et al.
SMART MATERIALS AND STRUCTURES (2016)
Multi-shape memory polymers achieved by the spatio-assembly of 3D printable thermoplastic building blocks
Hongze Li et al.
SOFT MATTER (2016)
3D Printed Flexure Hinges for Soft Monolithic Prosthetic Fingers
Rahim Mutlu et al.
SOFT ROBOTICS (2016)
Multi-shape active composites by 3D printing of digital shape memory polymers
Jiangtao Wu et al.
SCIENTIFIC REPORTS (2016)
3-D printing of multifunctional carbon nanotube yarn reinforced components
John M. Gardner et al.
ADDITIVE MANUFACTURING (2016)
3D-Printed Fluidic Devices for Nanoparticle Preparation and Flow-Injection Amperometry Using Integrated Prussian Blue Nanoparticle-Modified Electrodes
Gregory W. Bishop et al.
ANALYTICAL CHEMISTRY (2015)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
From 3D to 4D printing: approaches and typical applications
Ye Zhou et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Sheet metal forming using FDM rapid prototype tool
Ismail Durgun
RAPID PROTOTYPING JOURNAL (2015)
Sequential Folding using Light-activated Polystyrene Sheet
Yonghee Lee et al.
SCIENTIFIC REPORTS (2015)
3D Photo-Fabrication for Tissue Engineering and Drug Delivery
Ruben F. Pereira et al.
ENGINEERING (2015)
3D-printed chip for detection of methicillin-resistant Staphylococcus aureus labeled with gold nanoparticles
Dagmar Chudobova et al.
ELECTROPHORESIS (2015)
Pilot study describing the design process of an oil sump for a competition vehicle by combining additive manufacturing and carbon fibre layers
Aitor Cazon et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2015)
3D printed chip for electrochemical detection of influenza virus labeled with CdS quantum dots
Ludrnila Krejcova et al.
BIOSENSORS & BIOELECTRONICS (2014)
Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors
S. J. Leigh et al.
SMART MATERIALS AND STRUCTURES (2014)
Assessment of a Virtual Functional Prototyping Process for the Rapid Manufacture of Passive-Dynamic Ankle-Foot Orthoses
Elisa S. Schrank et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices
Philip J. Kitson et al.
LAB ON A CHIP (2012)
Rapid prototyping assisted fabrication of the customised temporomandibular joint implant: a case report
T. R. Deshmukh et al.
RAPID PROTOTYPING JOURNAL (2011)
Design and manufacture of a Formula SAE intake system using fused deposition modeling and fiber-reinforced composite materials
Ryan Ilardo et al.
RAPID PROTOTYPING JOURNAL (2010)
Fused deposition modeling of patient-specific polymethylmethacrylate implants
David Espalin et al.
RAPID PROTOTYPING JOURNAL (2010)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
SJ Kalita et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2003)
Scaffold design and fabrication technologies for engineering tissues - state of the art and future perspectives
DW Hutmacher
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2001)