相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Natural cellulose fiber-reinforced polyamide 6 thermoplastic composites prepared via in situ anionic ring-opening polymerization
Shahab Kashani Rahimi et al.
POLYMER COMPOSITES (2019)
The influence of montmorillonite on the processing and properties of anionic polyamide 6/montmorillonite composites via vacuum assisted resin infusion
Wenqi Wang et al.
POLYMER COMPOSITES (2019)
Influence of processing parameters on the impact behaviour of glass/polyamide-6 composite
Venkateswaran Santhanakrishnan Balakrishnan et al.
COMPOSITES PART B-ENGINEERING (2019)
Preparation of Glass Fabric/Poly(L-lactide) Composites by Thermoplastic Resin Transfer Molding
Elodie Louisy et al.
POLYMERS (2019)
Isothermal Crystallization Kinetics Study of Fully Aliphatic PA6 Copolyamides: Effect of Novel Long-Chain Polyamide Salt as a Comonomer
Syang-Peng Rwei et al.
POLYMERS (2019)
Polyamide 6/graphene oxide-g-hindered phenol antioxidant nano-composites: Intercalation structure and synergistic thermal oxidative stabilization effect
Ruiguang Li et al.
COMPOSITES PART B-ENGINEERING (2019)
Effectiveness of flame-based surface treatment for adhesive bonding of carbon fiber reinforced epoxy matrix composites
Tomo Takeda et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Study on dynamic mechanical, thermal, and mechanical properties of long glass fiber reinforced thermoplastic polyurethane/poly(butylene terephthalate) composites
Daohai Zhang et al.
POLYMER COMPOSITES (2018)
Manufacturing and properties of biobased thermoplastic composites from poly(lactid acid) and hazelnut shell wastes
J. F. Balart et al.
POLYMER COMPOSITES (2018)
Chemorheological study and in-situ monitoring of PA6 anionic-ring polymerization for RTM processing control
Abderrahim Maazouz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Enhancement of mechanical, thermal and tribological properties of AAPS-modified graphene oxide/polyamide 6 nanocomposites
Yue Chen et al.
COMPOSITES PART B-ENGINEERING (2018)
Graphite fluoride reinforced PA6 composites: Crystallization and mechanical properties
Haoyang Sun et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam
Celine Vicard et al.
POLYMER (2017)
Cooling rate dependence of the crystallinity at nonisothermal crystallization of polymers: A phenomenological model
Juergen E. K. Schawe
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Effect of sea water and humidity on the tensile and compressive properties of carbon-polyamide 6 laminates
Mael Arhant et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Micro-machinability of injection molded polyamide 6 polymer and glass-fiber reinforced polyamide 6 composite
Emel Kuram
COMPOSITES PART B-ENGINEERING (2016)
Manufacturing of the carbon/phenol composite bipolar plates for PEMFC with continuous hot rolling process
Minkook Kim et al.
COMPOSITE STRUCTURES (2015)
Investigation on the reactive processing of textile-ramie fiber reinforced anionic polyamide-6 composites
Ze Kan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites
Nevin Gamze Karsli et al.
COMPOSITES PART B-ENGINEERING (2013)
Effect of the relative humidity on the fibre morphology of polyamide 4.6 and polyamide 6.9 nanofibres
Bert De Schoenmaker et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Effect of Supercooling on Crystallization of Polyamide 11
Ayret Mollova et al.
MACROMOLECULES (2013)
The effect of carbon nanotubes on the thermal expansion isotropy of injection molded carbon fiber reinforced thermoplastics
P. F. Rios et al.
POLYMER COMPOSITES (2013)
Flame and silane treatments for improving the adhesive bonding characteristics of aramid/epoxy composites
Jin Gyu Kim et al.
COMPOSITE STRUCTURES (2011)
Optimizing Conditions for Anionic Polymerization of Caprolactam for Inkjetting
Khosrow Khodabakhshi et al.
ADVANCES IN POLYMER TECHNOLOGY (2010)
Mechanical behavior of self-assembled carbon nanotube reinforced nylon 6,6 fibers
Avinash Baji et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Textile fiber-reinforced anionic polyamide-6 composites. Part II: Investigation on interfacial bond formation by short beam shear test
K. van Rijswijk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Polymerization of lactams. 98: Influence of water on the non-activated polymerization of epsilon-caprolactam
Petr Bernat et al.
EUROPEAN POLYMER JOURNAL (2008)
The influence of a polymeric nucleating additive on the crystallisation in glass fibre reinforced polyamide 6 composites
U. Goeschel et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Effect of intermolecular interactions and cooling rates on crystallization behaviors of polyamide 6 blends
Shijie Zhang et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2007)
Optimisation of anionic polyamide-6 for vacuum infusion of thermoplastic composites: Influence of polymerisation temperature on matrix properties
K van Rijswijk et al.
POLYMER TESTING (2006)
Influence of a cooling rate on a structure of PA6
SS Pesetskii et al.
EUROPEAN POLYMER JOURNAL (2005)
Processing and properties of injection molded thermoplastic composites reinforced with melt processable glasses
RT Young et al.
POLYMER COMPOSITES (2000)
分享论文
