期刊
OPTIK
卷 202, 期 -, 页码 -出版社
ELSEVIER GMBH
DOI: 10.1016/j.ijleo.2019.163619
关键词
Laser materials processing; Laser surface hardening; High power diode laser; Design of experiments; Optimization
类别
In this research, laser surface hardening of AISI 410 was carried out by a high power diode laser based on Response Surface Method (RSM). Laser power, scanning speed, and focal plane position were evaluated as input process changeable while geometry dimensions of hardened zone (i.e., Depth and width of hardness), maximum hardness, Microhardness deviation (MHD) from base material in depth, and ferrite phase percentage in the microstructure were evaluated as process output Results. The effect of input parameters on the response variations were studied by statistical investigation. Results indicated that by increasing the laser power and decreasing other parameters, higher surface hardness with significant penetration, and least ferrite percentage would be reached by means of the desirability function approach. By using experimental tests, validation of optimized results was performed. In this research in the optimum conditions, the maximum hardness, maximum depth of hardness and minimum ferrite percentage were achieved 670 Vickers, 2.2 mm and 0.45%, respectively.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据