Physicochemical Properties of a Highly Efficient Cu-Ion-Doped TiO2 Nanotube Photocatalyst for the Degradation of Methyl Orange Under Sunlight

In this study, a series of copper-ion-doped titanium dioxide (Cu-ion-doped TiO2) nanotubes (NTs) were synthesized via a hydrothermal method by the concentration variation of doped Cu ions (0.00, 0.50, 1.00, 2.50, and 5.00 mmol). In addition, the samples were characterized using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), nitrogen gas adsorption measurements, and ultraviolet-visible (UV-Vis) diffuse-reflectance spectroscopy. The photocatalytic activity of the Cu-ion-doped TiO2 NTs was investigated for the degradation of methyl orange (MO) under sunlight. The results obtained from the structural and morphological studies revealed that, at low concentrations of Cu-doped TiO2 NTs, Cu is incorporated into the interstitial positions of the TiO2 lattice, affording a new phase of TiO2 (hexagonal) instead of the anatase TiO2 (tetragonal) observed for undoped TiO2 NTs. EDX analysis confirmed the presence of Cu in the TiO2-based photocatalyst. All of the investigated samples exhibited a hollow fibrous-like structure, indicative of an NT morphology. The inner and outer diameters of the NTs were 4 nm and 10 nm, respectively. The photocatalysts exhibited a large surface area due to the NT morphology and a type IV isotherm and H3 hysteresis, corresponding to the mesopores and slit-shaped pores. The Cu-ion-doped TiO2 NTs were excited by sunlight because of their low bandgap energy; and after the incorporation of Cu ions into the interstitial positions of the TiO2 lattice, the NTs exhibited high visible-light activity owing to the low bandgap.