相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Switching linear parameter-varying control with improved local performance and optimized switching surfaces
Pan Zhao et al.
INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL (2018)
Identification and compensation of friction for a novel two-axis differential micro-feed system
Fuxin Du et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
Improvement of metal forming quality by motion design
Recep Halicioglu et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2018)
Mechatronics of a ball screw drive using an N degrees of freedom dynamic model
Igor Ansoategui et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
An analytical local corner smoothing algorithm for five-axis CNC machining
Jixiang Yang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Modeling, identification and analysis of a novel two-axis differential micro-feed system
Fuxin Du et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Vibration Control of a High-Speed Precision Servo Numerically Controlled Punching Press: Multidomain Simulation and Experiments
Teng Xu et al.
SHOCK AND VIBRATION (2017)
Mechanisms, classifications, and applications of servo presses: A review with comparisons
Recep Halicioglu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Hybrid-loop servo control system of double toggle mechanical press for flexible forming process based on sliding mode control and neural network techniques
Jintao Liang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING (2016)
Research on the dynamics of ball screw feed system with high acceleration
Jun Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
High speed cornering strategy with confined contour error and vibration suppression for CNC machine tools
Burak Sencer et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Tracking and Structural Vibration Control of Flexible Ball-Screw Drives With Dynamic Variations
Masih Hanifzadegan et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2015)
Local toolpath smoothing for five-axis machine tools
Sneha Tulsyan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Dynamic characteristics optimization for a whole vertical machining center based on the configuration of joint stiffness
Congying Deng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Smooth switching LPV controller design for LPV systems
Masih Hanifzadegan et al.
AUTOMATICA (2014)
Switching Gain-Scheduled Control Design for Flexible Ball-Screw Drives
Masih Hanifzadegan et al.
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2014)
The influence of the lubricant film on the stiffness and damping characteristics of a deep groove ball bearing
William Jacobs et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2014)
Dynamic contact stiffness analysis of a double-nut ball screw based on a quasi-static method
Yongjiang Chen et al.
MECHANISM AND MACHINE THEORY (2014)
Control of ball screw drives based on disturbance response optimization
Kaan Erkorkmaz et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Integration of an Empirical Mode Decomposition Algorithm With Iterative Learning Control for High-Precision Machining
Meng-Shiun Tsai et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2013)
Smooth trajectory generation for five-axis machine tools
Alexander Yuen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Hybrid modeling and analysis of structural dynamic of a ball screw feed drive system
Liang Dong et al.
MECHANIKA (2013)
Accurate control of ball screw drives using pole-placement vibration damping and a novel trajectory prefilter
Dan J. Gordon et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)
Contour error control of CNC machine tools with vibration avoidance
Y. Altintas et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Tracking Control of Flexible Ball Screw Drives With Runout Effect and Mass Variation
Daniel Sepasi et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2012)
Modeling and vibration mode analysis of a ball screw drive
Diego A. Vicente et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Investigation of ball screw preload variation based on dynamic modeling of a preload adjustable feed-drive system and spectrum analysis of ball-nuts sensed vibration signals
Guo-Hua Feng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
An experimental testing of a simplified model of a ball bearing: stiffness calculation and defect simulation
M. Dougdag et al.
MECCANICA (2012)
Robust tracking control for micro machine tools with load uncertainties
Fan Shi-xun et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2012)
Nonlinear Dynamics Behaviors of Ball Screws with Preload Considered
Yongjiang Chen et al.
MACHINERY, MATERIALS SCIENCE AND ENGINEERING APPLICATIONS (2012)
Identification method for damping parameters of roller linear guides
Christian Brecher et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2012)
Machine tool feed drives
Y. Altintas et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Interpolation-Based Modeling of MIMO LPV Systems
Jan De Caigny et al.
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2011)
Real-Time PID Control Strategy for Maglev Transportation System via Particle Swarm Optimization
Rong-Jong Wai et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2011)
A new method of virtual material hypothesis-based dynamic modeling on fixed joint interface in machine tools
Hongliang Tian et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Improved Screw-Nut Interface Model for High-Performance Ball Screw Drives
Chinedum E. Okwudire
JOURNAL OF MECHANICAL DESIGN (2011)
Coordinated Adaptive Robust Contouring Control of an Industrial Biaxial Precision Gantry With Cogging Force Compensations
Chuxiong Hu et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2010)
An FPGA-Based Multiple-Axis Motion Control Chip
Jung Uk Cho et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2009)
Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis
I. Zaghbani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Minimum Tracking Error Control of Flexible Ball Screw Drives Using a Discrete-Time Sliding Mode Controller
Chinedum Okwudire et al.
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2009)
Hybrid Modeling of Ball Screw Drives With Coupled Axial, Torsional, and Lateral Dynamics
Chinedum E. Okwudire et al.
JOURNAL OF MECHANICAL DESIGN (2009)
Experimental identification of nonlinear dynamic properties of built-up structures
L. Heller et al.
JOURNAL OF SOUND AND VIBRATION (2009)
Computer-aided integrated design for machines with varying dynamics
Maira M. da Silva et al.
MECHANISM AND MACHINE THEORY (2009)
Integrated structure and control design for mechatronic systems with configuration-dependent dynamics
Maira Martins da Silva et al.
MECHATRONICS (2009)
Identification of interpolating affine LPV models for mechatronic systems with one varying parameter
Bart Paijmans et al.
EUROPEAN JOURNAL OF CONTROL (2008)
Design of Mechatronic Systems With Configuration-Dependent Dynamics: Simulation and Optimization
Maira M. da Silva et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2008)
Identification of the dynamic properties of joints using frequency-response functions
Damjan Ceilic et al.
JOURNAL OF SOUND AND VIBRATION (2008)
Experimental identification of the nonlinear parameters of an industrial translational guide for machine performance evaluation
Jaspreet S. Dhupia et al.
JOURNAL OF VIBRATION AND CONTROL (2008)
Reference-based combined deterministic-stochastic subspace identification for experimental and operational modal analysis
Edwin Reynders et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2008)
Springback behaviour in bending of ultra-high-strength steel sheets using CNC servo press
K. Mori et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Identification of bolted lap joints parameters in assembled structures
Hamid Ahmadian et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)
Compensation of axial vibrations in ball screw drives
A. Kamalzadeh et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Integrated design methodology of ball-screw driven servomechanisms with discrete controllers. Part I: Modelling and performance analysis
Min-Seok Kim et al.
MECHATRONICS (2006)
Identification of weak nonlinearities on damping and stiffness by the continuous wavelet transform
MN Ta et al.
JOURNAL OF SOUND AND VIBRATION (2006)
Machine tool axis dynamics
R. Whalley et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2006)
High bandwidth control of ball screw drives
K. Erkorkmaz et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
Improved total least squares estimators for modal analysis
P Verboven et al.
COMPUTERS & STRUCTURES (2005)
Hybrid modelling and simulation of a computer numerical control machine tool feed drive
C Pislaru et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING (2004)
Development of linear-parameter-varying models for aircraft
A Marcos et al.
JOURNAL OF GUIDANCE CONTROL AND DYNAMICS (2004)
Mechanical model and contouring analysis of high-speed ball-screw drive systems with compliance effect
JS Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2004)
Frequency-domain generalized total least-squares identification for modal analysis
P Verboven et al.
JOURNAL OF SOUND AND VIBRATION (2004)
The dynamics of lead-screw drives: Low-order modeling and experiments
KK Varanasi et al.
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2004)
Finite element modelling of ball screw feed drive systems
MF Zaeh et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Finite element modelling of ball screw feed drive systems
MF Zaeh et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Gain-scheduling control of machine tools with varying structural flexibility
W Symens et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Predicting dynamic behaviours of a whole machine tool structure based on computer-aided engineering
GP Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Reduction of blanking noise by controlling press motion
M Otsu et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
Identification of linear parameter varying models
B Bamieh et al.
INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL (2002)
Multivariable H∞ feedback control design for high-precision wafer stage motion
M van de Wal et al.
CONTROL ENGINEERING PRACTICE (2002)
A new method for structural model updating and joint stiffness identification
WL Li
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2002)
Towards a mechatronic compiler
H Van Brussel et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2001)