相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Optimization of process planning for reducing material waste in extrusion based additive manufacturing
Jingchao Jiang et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)
On the additive manufacturing of an energy storage device from recycled material
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2019)
Two-stage ball milling of recycled machining chips to create an alternative feedstock powder for metal additive manufacturing
Blake Fullenwider et al.
POWDER TECHNOLOGY (2019)
Development and characterisation of 3D printing finishing process applying recycled plastic waste
Marlon Wesley Machado Cunico et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Large scale additive manufacturing of eco-composites
J. F. Horta et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2018)
Novel biorenewable composite of wood polysaccharide and polylactic acid for three dimensional printing
Wenyang Xu et al.
CARBOHYDRATE POLYMERS (2018)
Closed-loop recycling of polyamide12 powder from selective laser sintering into sustainable composites
Lu Wang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Identifying key components of products based on consumer- and producer-oriented ecodesign indices considering environmental impacts, costs, and utility value
Yoon-Young Chun et al.
JOURNAL OF CLEANER PRODUCTION (2018)
A decision-support model for selecting additive manufacturing versus subtractive manufacturing based on energy consumption
J. K. Watson et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12
Peng Chen et al.
POLYMER TESTING (2018)
Additive manufacturing of mechanical testing samples based on virgin poly (lactic acid) (PLA) and PLA/wood fibre composites
Yu Dong et al.
ADVANCES IN MANUFACTURING (2018)
Benefits and limitations of three-dimensional printing technology for ecological research
Jocelyn E. Behm et al.
BMC ECOLOGY (2018)
Secondary use of ABS co-polymer recyclates for the manufacture of structural elements using the FFF technology
Piotr Czyzewski et al.
RAPID PROTOTYPING JOURNAL (2018)
Local and recyclable materials for additive manufacturing: 3D printing with mussel shells
M. Sauerwein et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Thermal and mechanical behavior of biocomposites using additive manufacturing
Jorge I. Montalvo Navarrete et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2018)
Study of Effects on Mechanical Properties of PLA Filament which is blended with Recycled PLA Materials
Babagowda et al.
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2017) (2018)
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Tao Peng et al.
ADDITIVE MANUFACTURING (2018)
Effect of wood content in FDM filament on properties of 3D printed parts
Mirko Kariz et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Biobased Acrylate Photocurable Resin Formulation for Stereolithography 3D Printing
Vincent S. D. Voet et al.
ACS OMEGA (2018)
Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing
Kevin R. Hart et al.
ADDITIVE MANUFACTURING (2018)
Recycled polyethylene terephthalate as a new FFF feedstock material
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2018)
The development of a strategy for direct part reuse using additive and subtractive manufacturing technologies
Van Thao Le et al.
ADDITIVE MANUFACTURING (2018)
Rethinking Timber: Investigation into the Use of Waste Macadamia Nut Shells for Additive Manufacturing
Jordan Girdis et al.
JOM (2017)
Life Cycle Assessment of 3D Printed Products in a Distributed Manufacturing System
Felipe Cerdas et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Charting the Environmental Dimensions of Additive Manufacturing and 3D Printing
Martin Baumers et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Addressing Hazardous Implications of Additive Manufacturing Complementing Life Cycle Assessment with a Framework for Evaluating Direct Human Health and Environmental Impacts
Justin Bours et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Environmental Dimensions of Additive Manufacturing Mapping Application Domains and Their Environmental Implications
Karel Kellens et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Predicting Concentrations of Ultrafine Particles and Volatile Organic Compounds Resulting from Desktop 3D Printer Operation and the Impact of Potential Control Strategies
Parham Azimi et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Characterization of Emissions from a Desktop 3D Printer
Luis Mendes et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Three-Dimensional Printing with Biomass-Derived PEF for Carbon-Neutral Manufacturing
Fedor A. Kucherov et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Mohsen Attaran
BUSINESS HORIZONS (2017)
Unlocking value for a circular economy through 3D printing: A research agenda
M. Despeisse et al.
TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2017)
Investigation into the material properties of wooden composite structures with in-situ fibre reinforcement using additive manufacturing
Kate Pitt et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
An additive manufacturing solution to produce big green parts from tires and recycled plastics
J. Domingues et al.
INTERNATIONAL CONFERENCE ON SUSTAINABLE AND INTELLIGENT MANUFACTURING (RESIM 2016) (2017)
Cork Plastic Composite Optimization for 3D Printing Applications
F. Brites et al.
INTERNATIONAL CONFERENCE ON SUSTAINABLE AND INTELLIGENT MANUFACTURING (RESIM 2016) (2017)
Use of wood powder and adhesive as a mixture for 3D printing
Mirko Kariz et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2016)
Comparative environmental impacts of additive and subtractive manufacturing technologies
Henri Paris et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Sustainable production in emerging markets through Distributed Manufacturing Systems (DMS)
Erwin Rauch et al.
JOURNAL OF CLEANER PRODUCTION (2016)
A design of experiments approach for the optimisation of energy and waste during the production of parts manufactured by 3D printing
C. A. Griffiths et al.
JOURNAL OF CLEANER PRODUCTION (2016)
A framework to reduce product environmental impact through design optimization for additive manufacturing
Yunlong Tang et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Simon Ford et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings
Patrick Steinle
JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing
Marcel Bogers et al.
TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2016)
Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer
Nima Afshar-Mohajer et al.
BUILDING AND ENVIRONMENT (2015)
Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment
Jeremy Faludi et al.
RAPID PROTOTYPING JOURNAL (2015)
Computational modeling as part of alternative testing strategies in the respiratory and cardiovascular systems: Inhaled nanoparticle dose modeling based on representative aerosol measurements and corresponding toxicological analysis
Marika Pilou et al.
NANOTOXICOLOGY (2015)
The Role of Additive Manufacturing in Improving Resource Efficiency and Sustainability
Melanie Despeisse et al.
ADVANCES IN PRODUCTION MANAGEMENT SYSTEMS: INNOVATIVE PRODUCTION MANAGEMENT TOWARDS SUSTAINABLE GROWTH (AMPS 2015), PT II (2015)
Additive manufacturing in the spare parts supply chain
Siavash H. Khajavi et al.
COMPUTERS IN INDUSTRY (2014)
A global sustainability perspective on 3D printing technologies
Malte Gebler et al.
ENERGY POLICY (2014)
Sustainability Characterization for Additive Manufacturing
Mahesh Mani et al.
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2014)
Proof of concept of an elastomer based fastener enabling rapid disassembly
Wannes Van den Bossche et al.
21ST CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2014)
Predictive model for environmental assessment in additive manufacturing process
Florent Le Bourhis et al.
21ST CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2014)
Sustainable manufacturing: evaluation and modeling of environmental impacts in additive manufacturing
Florent Le Bourhis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
CHEMICAL EXPOSURES OF WOMEN WORKERS IN THE PLASTICS INDUSTRY WITH PARTICULAR REFERENCE TO BREAST CANCER AND REPRODUCTIVE HAZARDS
Robert DeMatteo et al.
NEW SOLUTIONS-A JOURNAL OF ENVIRONMENTAL AND OCCUPATIONAL HEALTH POLICY (2012)
Eco-design in innovation driven companies: perception, predictions and the main drivers of integration. The Spanish example
Maria Santolaria et al.
JOURNAL OF CLEANER PRODUCTION (2011)
Sustainability of additive manufacturing: measuring the energy consumption of the laser sintering process
M. Baumers et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)
分享论文
