相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding Based on BEM
Zheng Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Study of the design of cooling channels for polymers injection molds
Felipe Marin et al.
POLYMER ENGINEERING AND SCIENCE (2018)
Effects of different cooling channels on the cooling efficiency in the wax injection molding process
Chil-Chyuan Kuo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Numerical and experimental investigation of process parameters optimization in plastic injection molding using multi-criteria decision making
Satoshi Kitayama et al.
SIMULATION MODELLING PRACTICE AND THEORY (2018)
Case Study to Illustrate the Potential of Conformal Cooling Channels for Hot Stamping Dies Manufactured Using Hybrid Process of Laser Metal Deposition (LMD) and Milling
Magdalena Cortina et al.
METALS (2018)
Numerical optimization of process parameters in plastic injection molding for minimizing weldlines and clamping force using conformal cooling channel
Satoshi Kitayama et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Direct rapid manufacturing of molds with conformal cooling channels
Mahesh S. Shinde et al.
RAPID PROTOTYPING JOURNAL (2018)
Multi-objective optimization of injection molding process parameters for short cycle time and warpage reduction using conformal cooling channel
Satoshi Kitayama et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting
Maciej Mazur et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Enhanced Injection Molding Simulation of Advanced Injection Molds
Bela Zink et al.
POLYMERS (2017)
A Simplified Simulation Model for a HPDC Die with Conformal Cooling Channels
Markus Frings et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Cycle Time Improvement for Plastic Injection Moulding Process by Sub Groove Modification in Conformal Cooling Channel
K. Kamarudin et al.
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) (2017)
Warpage Optimisation on the Moulded Part with Straight-Drilled and Conformal Cooling Channels using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO)
M. H. M. Hazwan et al.
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) (2017)
Warpage Optimisation on the Moulded Part with Straight Drilled and MGSS Conformal Cooling Channels Using Response Surface Methodology (RSM)
M. H. M. Hazwan et al.
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) (2017)
Warpage Optimisation on the Moulded Part with Conformal Cooling Channels using Response Surface Methodology (RSM) and Genetic Algorithm (GA) Optimisation Approaches
M. H. M. Hazwan et al.
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) (2017)
Warpage Optimisation on the Moulded Part with Straight-Drilled and Conformal Cooling Channels using Response Surface Methodology (RSM) and Genetic Algorithm (GA) Optimisation Approaches
M. H. M. Hazwan et al.
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) (2017)
Development of a smart plastic injection mold with conformal cooling channels
Hong-Seok Park et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Innovative grid molding and cooling using an additive and subtractive hybrid CNC machine tool
Masakazu Soshi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
A method of measuring tool tip vibration in turning operations
Hongqi Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Advancements in the manufacturing of dies for hot aluminum extrusion with conformal cooling channels
Ramona Hoelker et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Numerical investigation on cooling performance of hot stamping tool with various channel designs
Ping Hu et al.
APPLIED THERMAL ENGINEERING (2016)
Optimal design of longitudinal conformal cooling channels in hot stamping tools
Bin He et al.
APPLIED THERMAL ENGINEERING (2016)
Optimal Conformal Cooling Channels in 3D Printed Dies for Plastic Injection Molding
Suchana A. Jahan et al.
44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44 (2016)
Implementation of Conformal Cooling & Topology Optimization in 3D Printed Stainless Steel Porous Structure Injection Molds
Suchana A. Jahan et al.
44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44 (2016)
The benefits of a conforming cooling systems the molds in injection moulding process
Eva Vojnova
INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016 (2016)
Design of conformal cooling layers with self-supporting lattices for additively manufactured tooling
Hadley Brooks et al.
ADDITIVE MANUFACTURING (2016)
Thermal simulations and measurements for rapid tool inserts in injection molding applications
Jozsef Gabor Kovacs et al.
APPLIED THERMAL ENGINEERING (2015)
Spiral and conformal cooling in plastic injection molding
Yu Wang et al.
COMPUTER-AIDED DESIGN (2015)
Conformal bubbler cooling for molds by metal deposition process
Kunnayut Eiamsa-ard et al.
COMPUTER-AIDED DESIGN (2015)
A Framework for Optimizing the Design of Injection Molds with Conformal Cooling for Additive Manufacturing
Tong Wu et al.
43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43 (2015)
Potential of Conformal Cooling Channels in Rapid Heat Cycle Molding: A Review
Z. Shayfull et al.
ADVANCES IN POLYMER TECHNOLOGY (2013)
Conformal cooling channel design and CAE simulation for rapid blow mould
K. M. Au et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Thermal-structural analysis of bi-metallic conformal cooling for injection moulds
A. B. M. Saifullah et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Modeling of multi-connected porous passageway for mould cooling
K. M. Au et al.
COMPUTER-AIDED DESIGN (2011)
Automatic design of conformal cooling circuits for rapid tooling
Yu Wang et al.
COMPUTER-AIDED DESIGN (2011)
Design of U-shape Milled Groove Conformal Cooling Channels for Plastic Injection Mold
Xuan-Phuong Dang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Applications of Laser Assisted Metal Rapid Tooling Process to Manufacture of Molding & Forming Tools - State of the Art
Dong-Gyu Ahn
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Structural optimization based on CAD-CAE integration and metamodeling techniques
Hong-Seok Park et al.
COMPUTER-AIDED DESIGN (2010)
Optimization of conformal cooling channels with array of baffles for plastic injection mold
Hong-Seok Park et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2010)
Manufacture of an injection mould with rapid and uniform cooling characteristics for the fan parts using a DMT process
Dong-Gyu Ahn et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2010)
3D study of cooling system effect on the heat transfer during polymer injection molding
Hamdy Hassan et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)
Analysis of thermal cycling efficiency and optimal design of heating/cooling systems for rapid heat cycle injection molding process
Wang Guilong et al.
MATERIALS & DESIGN (2010)
An acceleration method for the BEM-based cooling simulation of injection molding
Huamin Zhou et al.
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2009)
DESIGN OF CONFORMAL COOLING CHANNELS FOR AN AUTOMOTIVE PART
H. S. Park et al.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY (2009)
Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm
Xi-Ping Li et al.
MATERIALS & DESIGN (2009)
A scaffolding architecture for conformal cooling design in rapid plastic injection moulding
K. M. Au et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
A systematic computer-aided approach to cooling system optimal design in plastic injection molding
H Qiao
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2006)
Study on residual stresses of thin-walled injection molding
TH Wang et al.
EUROPEAN POLYMER JOURNAL (2005)
Design and optimisation of conformal cooling channels in injection moulding tools
DE Dimla et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Mold cooling simulation of the pressing process in TV panel production
HM Zhou et al.
SIMULATION MODELLING PRACTICE AND THEORY (2005)
Transient mold cooling analysis using BEM with the time-dependent fundamental solution
H Qiao
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2005)
Analysis of cooling channels performance
AJ Norwood et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2004)
An evolutionary approach for cooling system optimization in plastic injection moulding
YC Lam et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2004)
Studies of rapid soft tooling with conformal cooling channels for plastic injection moulding
JC Ferreira et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Optimum cooling system design of a free-form injection mold using an abductive network
JC Lin
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Optimization of cooling systems in injection molds by an easily applicable analytical model
NS Rao et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2002)
The design of conformal cooling channels in injection molding tooling
XR Xu et al.
POLYMER ENGINEERING AND SCIENCE (2001)
Analysis of thermal residual stress in plastic injection molding
X Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
分享论文
