相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Three-dimensional (3D) printed scaffold and material selection for bone repair
Lei Zhang et al.
ACTA BIOMATERIALIA (2019)
Improving osteoblasts cells proliferation via femtosecond laser surface modification of 3D-printed poly-ε-caprolactone scaffolds for bone tissue engineering applications
A. Daskalova et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Heparin-Poloxamer Thermosensitive Hydrogel Loaded with bFGF and NGF Enhances Peripheral Nerve Regeneration in Diabetic Rats
Rui Li et al.
BIOMATERIALS (2018)
Optimal electrical stimulation boosts stem cell therapy in nerve regeneration
Jian Du et al.
BIOMATERIALS (2018)
Biomimetic Materials and Fabrication Approaches for Bone Tissue Engineering
Hwan D. Kim et al.
ADVANCED HEALTHCARE MATERIALS (2017)
3D printed porous ceramic scaffolds for bone tissue engineering: a review
Yu Wen et al.
BIOMATERIALS SCIENCE (2017)
3D robocasting magnesium-doped wollastonite/TCP bioceramic scaffolds with improved bone regeneration capacity in critical sized calvarial defects
Huifeng Shao et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
3D printing of hybrid biomaterials for bone tissue engineering: Calcium-polyphosphate microparticles encapsulated by polycaprolactone
Meik Neufurth et al.
ACTA BIOMATERIALIA (2017)
Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect
Huifeng Shao et al.
BIOFABRICATION (2017)
A Simple Approach for an Eggshell-Based 3D-Printed Osteoinductive Multiphasic Calcium Phosphate Scaffold
Prabhash Dadhich et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Strength reliability and in vitro degradation of three-dimensional powder printed strontium-substituted magnesium phosphate scaffolds
Susanne Meininger et al.
ACTA BIOMATERIALIA (2016)
Bone graft substitutes and bone morphogenetic proteins for osteoporotic fractures: what is the evidence?
Esther M. M. Van Lieshout et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2016)
3D printing magnesium-doped wollastonite/β-TCP bioceramics scaffolds with high strength and adjustable degradation
Huifeng Shao et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Simultaneous mechanical property and biodegradation improvement of wollastonite bioceramic through magnesium dilute doping
Jiajun Xie et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
The outstanding mechanical response and bone regeneration capacity of robocast dilute magnesium-doped wollastonite scaffolds in critical size bone defects
An Liu et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
3D plotting of highly uniform Sr-5(PO4)(2)SiO4 bioceramic scaffolds for bone tissue engineering
Huiying Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Rational Design and Fabrication of Porous Calcium-Magnesium Silicate Constructs That Enhance Angiogenesis and Improve Orbital Implantation
Dongshuang He et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Rational Design and Fabrication of Porous Calcium-Magnesium Silicate Constructs That Enhance Angiogenesis and Improve Orbital Implantation
Dongshuang He et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printing Surgical Implants at the clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction
An Liu et al.
SCIENTIFIC REPORTS (2016)
Three-Dimensional Printing of Hollow-Struts-Packed Bioceramic Scaffolds for Bone Regeneration
Yongxiang Luo et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Mechanical, dielectric properties and thermal shock resistance of porous silicon oxynitride ceramics by gas pressure sintering
Shaojie Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Mesoporous bioactive glass nanolayer-functionalized 3D-printed scaffolds for accelerating osteogenesis and angiogenesis
Yali Zhang et al.
NANOSCALE (2015)
Ultrahigh strength of three-dimensional printed diluted magnesium doping wollastonite porous scaffolds
Jiajun Xie et al.
MRS COMMUNICATIONS (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Fabrication and Osteogenesis of a Porous Nanohydroxyapatite/Polyamide Scaffold with an Anisotropic Architecture
Fu You et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)
Fabrication and Osteogenesis of a Porous Nanohydroxyapatite/Polyamide Scaffold with an Anisotropic Architecture
Fu You et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)
In vivo implantation of porous titanium alloy implants coated with magnesium-doped octacalcium phosphate and hydroxyapatite thin films using pulsed laser depostion
Waldemar Mroz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2015)
Bioactive glass-reinforced bioceramic ink writing scaffolds: sintering, microstructure and mechanical behavior
Huifeng Shao et al.
BIOFABRICATION (2015)
Polycaprolactone-Coated 3D Printed Tricalcium Phosphate Scaffolds for Bone Tissue Engineering: In Vitro Alendronate Release Behavior and Local Delivery Effect on In Vivo Osteogenesis
Solaiman Tarafder et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Additive Manufacturing of Ceramic-Based Materials
Nahum Travitzky et al.
ADVANCED ENGINEERING MATERIALS (2014)
Magnesium-containing bioactive polycrystalline silicate-based ceramics and glass-ceramics for biomedical applications
Mani Diba et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
Bioactive bredigite coating with improved bonding strength, rapid apatite mineralization and excellent cytocompatibility
Deliang Yi et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2014)
Bone substitutes in orthopaedic surgery: from basic science to clinical practice
V. Campana et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
A novel approach to enhance protein adsorption and cell proliferation on hydroxyapatite: citric acid treatment
Wing-Hin Lee et al.
RSC ADVANCES (2013)
Outcomes and complication rates of different bone grafting modalities in long bone fracture nonunions: a retrospective cohort study in 182 patients
Michael A. Flierl et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2013)
The enhancement of bone regeneration by a combination of osteoconductivity and osteostimulation using beta-CaSiO3/beta-Ca-3(PO4)(2) composite bioceramics
Chen Wang et al.
ACTA BIOMATERIALIA (2012)
Variability in the Definition and Perceived Causes of Delayed Unions and Nonunions
Mohit Bhandari et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2012)
3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis
Chengtie Wu et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
THREE-DIMENSIONAL PRINTERS ARE OPENING UP NEW WORLDS TO RESEARCH.
Nicola Jones
NATURE (2012)
Bioactive glass-ceramic coated titanium implants prepared by electrophoretic deposition
Annabel Braem et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)
Bioinspired Strong and Highly Porous Glass Scaffolds
Qiang Fu et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth
Anthony C. Jones et al.
BIOMATERIALS (2009)
Reconstruction of calvarial defect of rabbits using porous calcium silicate bioactive ceramics
Songfeng Xu et al.
BIOMATERIALS (2008)
Calcium Phosphate-Based Osteoinductive Materials
Racquel Zapanta LeGeros
CHEMICAL REVIEWS (2008)
Manufacture of macroporous beta-tricalcium phosphate bioceramics
M. Descamps et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
Stem cells associated with macroporous bioceramics for long bone repair: 6-to 7-year outcome of a pilot clinical study
Maurilio Marcacci et al.
TISSUE ENGINEERING (2007)
Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: Three-dimensional micro-CT based structural analyses of porous bioactive titanium implants
Bungo Otsuki et al.
BIOMATERIALS (2006)
A novel route to fabricate the biomedical material: Structure strategy and the biologically active ions controllable release
Zhongru Gou et al.
JOURNAL OF CONTROLLED RELEASE (2006)
Gene activation by bioactive glasses
G. Jell et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2006)
The management of fractures with bone loss
JF Keating et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2005)
Orthosilicic acid stimulates collagen type 1 synthesis and osteoblastic differentiation in human osteoblast-like cells in vitro
DM Reffitt et al.
BONE (2003)
Sintering dense nanocrystalline ceramics without final-stage grain growth
IW Chen et al.
NATURE (2000)