Influence of nanoscale zero-valent iron on hydraulic conductivity of a residual clayey soil and modeling of the filtration parameter

Contaminated clay soils pose problems to public health and the environment in several parts of the world. Very little is known about the transport of decontaminating agents used in remediation process under natural, undisturbed conditions. Nanomaterials, especially those made of nanoscale zero-valent iron (nZVI), have been most frequently used for remediation of contaminated soils because of their higher reactivity, lower toxicity, and lower cost than other metallic nanoparticles. Even though the nanoparticle size is smaller than soil pores, clogging may occur over time due to agglomeration of nanoparticles, which could reduce the soil's natural permeability and thereby cause filtration of the nanoparticles. The use of a stabilizer in the nanoparticles can modify the reactivity but improves their mobility in the soil system. Thus, the objective of this work was to evaluate the hydraulic conductivity of residual clay soil under the injection of different types and concentrations of nZVI with and without surfactant stabilizer (NANOFER 25, NANOFER 25S, and NANOFER STAR in powder at 1 g/L, 4 g/L, 7 g/L, and 10 g/L concentrations), and to model transport of these nZVI suspensions in this soil system. Undisturbed cylindrical soil samples collected from the field were used, and hydraulic conductivity tests were performed using a column apparatus. The results showed that the presence of the stabilizer in the nZVI influenced the nanoparticles' mobility. The nZVI concentrations of 1 and 4 g/L did not affect the natural soil hydraulic conductivity. However, higher concentrations reduced the hydraulic conductivity value, which retarded the migration of nZVI as reflected in the value of filtration parameter.