相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。In vitro bioactivity, molecular structure and mechanical properties of zirconia-carbonated hydroxyapatite nanobiocomposites sintered at different temperatures
Rasha A. Youness et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Creating defects on graphene basal-plane toward interface optimization of graphene/CuCr composites
Ke Chu et al.
CARBON (2019)
Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball milling
A. Fathy et al.
CERAMICS INTERNATIONAL (2019)
Mechanical and electrical properties of copper-graphene nanocomposite fabricated by high pressure torsion
Nidhi Khobragade et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Thermal and mechanical properties of copper-graphite and copper-reduced graphene oxide composites
Faisal Nazeer et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of GNPs coated Ag on microstructure and mechanical properties of Cu-Fe dual-matrix nanocomposite
Ahmed Abu-Oqail et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
In vitro bioactivity evaluation, antimicrobial behavior and mechanical properties of cerium-containing phosphate glasses
Rasha A. Youness et al.
MATERIALS RESEARCH EXPRESS (2019)
Thermal, mechanical and electrical properties of lithium phosphate glasses doped with copper oxide
M. A. Ouis et al.
BULLETIN OF MATERIALS SCIENCE (2019)
Copper/graphene composites: a review
Paloma Hidalgo-Manrique et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Experimental study on tribological properties of Cu-Al2O3 nanocomposite hybridized by graphene nanoplatelets
A. M. Sadoun et al.
CERAMICS INTERNATIONAL (2019)
Review on nanocomposites fabricated by mechanical alloying
Mohammed A. Taha et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)
An Overview of the Recent Developments in Metal Matrix Nanocomposites Reinforced by Graphene
Mehran Dadkhah et al.
MATERIALS (2019)
Effect of SiC content on microstructure, mechanical and electrical properties of sintered Al-20Si-xSiC nanocomposites fabricated by mechanical alloying
M. F. Zawrah et al.
MATERIALS RESEARCH EXPRESS (2019)
Effect of high energy ball milling on strengthening of Cu-ZrO2 nanocomposites
A. Abu-Oqail et al.
CERAMICS INTERNATIONAL (2019)
Low-Cost Mechanically Alloyed Copper-Based Composite Reinforced with Silicate Glass Particles for Thermal Applications
Alexey Prosviryakov et al.
JOM (2019)
The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion
Yi Huang et al.
ACTA MATERIALIA (2019)
Tribological Properties of B4C Nano Particulates Reinforced Copper Matrix Nanocomposites
Poovazhagan Lakshmanan et al.
MATERIALS TODAY-PROCEEDINGS (2019)
A Novel Approach to Enhance the Mechanical Strength and Electrical and Thermal Conductivity of Cu-GNP Nanocomposites
Abdollah Saboori et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
A Novel Cu-GNPs Nanocomposite with Improved Thermal and Mechanical Properties
Abdollah Saboori et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2018)
Mechanical Alloying and Sintering of a Ni/10wt.%Al2O3 Nanocomposite and its Characterization
Mohammed A. Taha et al.
SILICON (2018)
In-situ formation of Al2O3/Al core-shell from waste material: Production of porous composite improved by graphene
M. F. Zawrah et al.
CERAMICS INTERNATIONAL (2018)
Effect of ZrO2 contents and ageing times on mechanical and electrical properties of Al-4.5 wt.% Cu nanocomposites prepared by mechanical alloying
Mohammed A. Taha et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Influence of the addition of carbonated hydroxyapatite and selenium dioxide on mechanical properties and in vitro bioactivity of borosilicate inert glass
Rasha A. Youness et al.
CERAMICS INTERNATIONAL (2018)
In vitro bioactivity, physical and mechanical properties of carbonated-fluoroapatite during mechanochemical synthesis
Rasha A. Youness et al.
CERAMICS INTERNATIONAL (2018)
Advances in synthesizing copper/graphene composite material
Lei Zhang et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Preparation, Fourier Transform Infrared Characterization and Mechanical Properties of Hydroxyapatite Nanopowders
Rasha A Youness et al.
Journal of Computational and Theoretical Nanoscience (2017)
An Investigation on the Sinterability and the Compaction Behavior of Aluminum/Graphene Nanoplatelets (GNPs) Prepared by Powder Metallurgy
A. Saboori et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Effect of sintering temperatures on the in vitro bioactivity, molecular structure and mechanical properties of titanium/carbonated hydroxyapatite nanobiocomposites
Rasha A. Youness et al.
JOURNAL OF MOLECULAR STRUCTURE (2017)
Molecular modeling, FTIR spectral characterization and mechanical properties of carbonated-hydroxyapatite prepared by mechanochemical synthesis
Rasha A. Youness et al.
MATERIALS CHEMISTRY AND PHYSICS (2017)
New Nanocomposite Materials with Improved Mechanical Strength and Tailored Coefficient of Thermal Expansion for Electro-Packaging Applications
Abdollah Saboori et al.
METALS (2017)
Synergistic enhancing effect for mechanical and electrical properties of tungsten copper composites using spark plasma infiltrating sintering of copper-coated graphene
Wenge Chen et al.
SCIENTIFIC REPORTS (2017)
Preparation of super-high strength nanostructured B4C reinforced Al-2Cu aluminum alloy matrix composites by mechanical milling and hot press method: Microstructural, mechanical and tribological characterization
Ali Alizadeh et al.
ADVANCED POWDER TECHNOLOGY (2017)
Effect of nano ZrO2 on strengthening and electrical properties of Cu-matrix nanocomposits prepared by mechanical alloying
Mohammed A. Taha et al.
CERAMICS INTERNATIONAL (2017)
Improvement of wetability, sinterability, mechanical and electrical properties of Al2O3-Ni nanocomposites prepared by mechanical alloying
Mohammed A. Taha et al.
CERAMICS INTERNATIONAL (2017)
Effects of graphene content on the microstructure and properties of copper matrix composites
Fanyan Chen et al.
CARBON (2016)
Effect of milling parameters on sinterability, mechanical and electrical properties of Cu-4 wt.% ZrO2 nanocomposite
Mohammed A. Taha et al.
MATERIALS CHEMISTRY AND PHYSICS (2016)
Microstructural and sliding wear behavior of SiC-particle reinforced copper matrix composites fabricated by sintering and sinter-forging processes
Mohammadmehdi Shabani et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Spark plasma sintering of ZrO2 fiber toughened ZrB2-based ultra-high temperature ceramics
Jia Lin et al.
CERAMICS INTERNATIONAL (2015)
SiC content effect on the properties of Cu-SiC composites produced by mechanical alloying
A. S. Prosviryakov
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effect of Sintering Temperature and Boron Carbide Content on the Wear Behavior of Hot Pressed Diamond Cutting Segments
S. Islak et al.
SCIENCE OF SINTERING (2015)
Microstructural and hardness behavior of graphene-nanoplatelets/aluminum composites synthesized by mechanical alloying
R. Perez-Bustamante et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Mechanical alloying and sintering of nanostructured TiO2 reinforced copper composite and its characterization
Y. A. Sorkhe et al.
MATERIALS & DESIGN (2014)
Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing
H. R. Akramifard et al.
MATERIALS & DESIGN (2014)
Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites
A. Baradeswaran et al.
MATERIALS & DESIGN (2014)
Enhanced strength in bulk graphene-copper composites
Ke Chu et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2014)
Effect of Sintering Temperature on Electrical and Microstructure Properties of Hot Pressed Cu-TiC Composites
S. Islak et al.
SCIENCE OF SINTERING (2014)
Preparation by mechanical alloying, characterization and sintering of Cu-20 wt.% Al2O3 nanocomposites
M. F. Zawrah et al.
MATERIALS & DESIGN (2013)
Effect of nano-size Al2O3 reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical alloying
I. Mobasherpour et al.
MATERIALS CHEMISTRY AND PHYSICS (2013)
Mechanical reinforcement of a high-performance aluminium alloy AA5083 with homogeneously dispersed multi-walled carbon nanotubes
Julien Stein et al.
CARBON (2012)
Hardness and Wear Properties of Al-4.5%Cu/Al3Mg2 Nanocomposite Prepared by Mechanical Alloying
Narguess Nemati et al.
MATERIALS TRANSACTIONS (2012)
Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites
Lian-Yi Chen et al.
SCRIPTA MATERIALIA (2012)
Strain hardening behavior of a friction stir welded magnesium alloy
N. Afrin et al.
SCRIPTA MATERIALIA (2007)
Wear behavior of hot extruded A16061 based composites
C. S. Ramesh et al.
WEAR (2007)
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
Z Zhang et al.
SCRIPTA MATERIALIA (2006)
Dry sliding wear behavior of in situ Cu-TiB2 nanocomposites against medium carbon steel
JP Tu et al.
WEAR (2003)