期刊
ACI STRUCTURAL JOURNAL
卷 117, 期 1, 页码 241-254出版社
AMER CONCRETE INST
DOI: 10.14359/51718073
关键词
columns; design codes; first and second-order analysis; GFRP reinforcing bars; instability and buckling; lateral displacement; reinforced concrete; short and slender columns; slenderness ratio; stiffness
资金
- Tier-1 Canada Research Chair in Advanced Composite Materials for Civil Structures
- Natural Sciences and Engineering Research Council of Canada (NSERC)
- Mathematics of Information Technology and Complex Systems (MITACS)
- Fonds de recherche du Quebec en nature et technologies (FRQNT)
To develop design provisions for concrete columns reinforced with fiber-reinforced polymer (FRP) bar for North American codes and guidelines (ACI 440.1R, CSA S806), a slenderness limit below which it is acceptable to ignore the induced second-order effects must be determined. Nevertheless, limited attempts have been made to define a safe slenderness limit for such columns. Therefore, this study aimed at experimentally and analytically investigating the buckling behavior of 12 full-scale concrete columns reinforced with glass FRP (GFRP) with slenderness ratios of 14, 17, 23, 26, and 33 under concentric loading. The impact of longitudinal rein-forcement ratios and confining levels on the performance of slender GFRP-reinforced concrete (GFRP-RC) columns is also presented. Test results indicate that the GFRP reinforcement contributed significantly to resisting the applied compression loads and resulted in failure modes similar to that of the counterpart steel-reinforced concrete columns at different slenderness ratios. In addition, a theoretical buckling analysis considering a total of 50 test specimens, assembled from the current study and the literature, was developed to verify the applicability of Euler-Johnson's stability envelope as well as the reduced and incremental modulus theories to FRP-RC columns. Good correlation was observed between the experimental results and the models developed analytically. Based on the experimental data and the developed buckling analysis, the safe limit of the slenderness ratio for FRP-RC columns bent in single curvature of 18 is proposed.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据