相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Swelling and rheological study of calcium phosphate filled bacterial cellulose-based hydrogel scaffold
Probal Basu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
PVP - CMC hydrogel: An excellent bioinspired and biocompatible scaffold for osseointegration
Nabanita Saha et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Hybrid fracture fixation systems developed for orthopaedic applications: A general review
Li Tian et al.
JOURNAL OF ORTHOPAEDIC TRANSLATION (2019)
Microfibrillated cellulose enhancement to mechanical and conductive properties of biocompatible hydrogels
Fengcai Lin et al.
CARBOHYDRATE POLYMERS (2019)
Innovative Biomaterials for Bone Regrowth
Maria Rosa Iaquinta et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)
Load-bearing biodegradable polycaprolactone-poly (lactic-co-glycolic acid)- beta tri-calcium phosphate scaffolds for bone tissue regeneration
Alok Kumar et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
Effect on Mechanical and Thermal Properties of Random Copolymer Polypropylene/Microcrystalline Cellulose Composites Using T-ZnOw as an Additive
Dan Cheng et al.
ADVANCES IN POLYMER TECHNOLOGY (2019)
Two-Dimensional Black Phosphorus and Graphene Oxide Nanosheets Synergistically Enhance Cell Proliferation and Osteogenesis on 3D Printed Scaffolds
Xifeng Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
A Composite Hydrogel with High Mechanical Strength, Fluorescence, and Degradable Behavior for Bone Tissue Engineering
Yanqin Wang et al.
POLYMERS (2019)
Polysaccharide-Based Superporous, Superabsorbent, and Stimuli Responsive Hydrogel from Sweet Basil: A Novel Material for Sustained Drug Release
Bilal Ahmad Lodhi et al.
ADVANCES IN POLYMER TECHNOLOGY (2019)
Inorganic calcium filled bacterial cellulose based hydrogel scaffold: novel biomaterial for bone tissue regeneration
Probal Basu et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2019)
A Wearable Iron-Based Implant as an Intramedullary Nail in Tibial Shaft Fracture of Sheep
Sitaria F. Siallagan et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2019)
Smart films based on bacterial cellulose nanofibers modified by conductive polypyrrole and zinc oxide nanoparticles
Sajad Pirsa et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
The medical assessment of fractures in suspected child maltreatment: Infants and young children with skeletal injury
Laurel Chauvin-Kimoff et al.
PAEDIATRICS & CHILD HEALTH (2018)
Commercial challenges in developing biomaterials for medical device development
Jeremy J. Harris et al.
POLYMER INTERNATIONAL (2018)
Biocompatible Porous Polyester-Ether Hydrogel Scaffolds with Cross-Linker Mediated Biodegradation and Mechanical Properties for Tissue Augmentation
Berkay Ozcelik et al.
POLYMERS (2018)
3D Printing and Electrospinning of Composite Hydrogels for Cartilage and Bone Tissue Engineering
Arianna De Mori et al.
POLYMERS (2018)
A review of biomaterials in bone defect healing, remaining shortcomings and future opportunities for bone tissue engineering THE UNSOLVED CHALLENGE
T. Winkler et al.
BONE & JOINT RESEARCH (2018)
3D-Printing of Microfibrous Porous Scaffolds Based on Hybrid Approaches for Bone Tissue Engineering
Ranjith Kumar Kankala et al.
POLYMERS (2018)
Biocompatibility and Biological Efficiency of Inorganic Calcium Filled Bacterial Cellulose Based Hydrogel Scaffolds for Bone Bioengineering
Probal Basu et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Bacterial cellulose-based scaffold materials for bone tissue engineering
Selorm Torgbo et al.
APPLIED MATERIALS TODAY (2018)
Synthetic Polymer Scaffolds for Soft Tissue Engineering
O. Janouskova
PHYSIOLOGICAL RESEARCH (2018)
Comparison of bacterial cellulose production by Gluconacetobacter xylinus on bagasse acid and enzymatic hydrolysates
Gao-Xiang Qi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Chitosan-based hydrogels: recent design concepts to tailor properties and functions
Lisa Racine et al.
POLYMER INTERNATIONAL (2017)
Strategic Directions in Osteoinduction and Biomimetics INTRODUCTION
Pamela Habibovic
TISSUE ENGINEERING PART A (2017)
Viscoelastic behaviour of hydrogel-based composites for tissue engineering under mechanical load
Rok Kocen et al.
BIOMEDICAL MATERIALS (2017)
Environmental-sensitive chitosan-g-polyacrylamide/carboxymethylcellulose superabsorbent composites for wastewater purification I: synthesis and properties
Hafida Ferfera-Harrar et al.
POLYMER BULLETIN (2016)
The impact velocity and bone fracture pattern: Forensic perspective
Haim Cohen et al.
FORENSIC SCIENCE INTERNATIONAL (2016)
Integrated three-dimensional fiber/hydrogel biphasic scaffolds for periodontal bone tissue engineering
Dario Puppi et al.
POLYMER INTERNATIONAL (2016)
Composite scaffolds for cartilage tissue engineering based on natural polymers of bacterial origin, thermoplastic poly(3-hydroxybutyrate) and micro-fibrillated bacterial cellulose
Everest Akaraonye et al.
POLYMER INTERNATIONAL (2016)
Human iPSC-derived osteoblasts and osteoclasts together promote bone regeneration in 3D biomaterials
Ok Hee Jeon et al.
SCIENTIFIC REPORTS (2016)
Rheological characterization of multi-component hydrogel based on carboxymethyl cellulose: insight into its encapsulation capacity and release kinetics towards ibuprofen
Masrat Maswal et al.
COLLOID AND POLYMER SCIENCE (2015)
Synthesis and Characterization of Methylcellulose Produced from Bacterial Cellulose under Heterogeneous Condition
Rafael L. Oliveira et al.
JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY (2015)
Biodegradation evaluation of bacterial cellulose, vegetable cellulose and poly (3-hydroxybutyrate) in soil
Suellen Brasil Schropfer et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2015)
Biodegradable Materials for Bone Repair and Tissue Engineering Applications
Zeeshan Sheikh et al.
MATERIALS (2015)
Physical, structural, mechanical and thermal characterization of bacterial cellulose by G-hansenii NCIM 2529
Bhavna V. Mohite et al.
CARBOHYDRATE POLYMERS (2014)
The revised phase diagram of the Ca3(PO4)2-YPO4 system. The temperature and concentration range of solid-solution phase fields
Aleksandra Matraszek et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)
Degradation of silicone rubbers with different hardness in various aqueous solutions
Jun Feng et al.
POLYMER DEGRADATION AND STABILITY (2014)
Osteogenesis from Human Induced Pluripotent Stem Cells: An In Vitro and In Vivo Comparison with Mesenchymal Stem Cells
Ji-Yun Ko et al.
STEM CELLS AND DEVELOPMENT (2014)
Evaluation of calcium ion release and change in pH on combining calcium hydroxide with different vehicles
Charu Grover et al.
CONTEMPORARY CLINICAL DENTISTRY (2014)
Morphological Effect on Swelling Behaviour of Hydrogel
Norzita Yacob et al.
ADVANCING NUCLEAR RESEARCH AND ENERGY DEVELOPMENT (2014)
Enhanced reconstruction of rat calvarial defects achieved by plasma-treated electrospun scaffolds and induced pluripotent stem cells
Abdolreza Ardeshirylajimi et al.
CELL AND TISSUE RESEARCH (2013)
Preparation and characterization of bacterial cellulose microfiber/goat bone apatite composites for bone repair
Xiaoxia Fan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Bone tissue engineering of induced pluripotent stem cells cultured with macrochanneled polymer scaffold
Guang-Zhen Jin et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
On the structural, mechanical, and biodegradation properties of HA/β-TCP robocast scaffolds
Manuel Houmard et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Evaluation of Physical and Mechanical Properties of Porous Poly (Ethylene Glycol)-co-(L-Lactic Acid) Hydrogels during Degradation
Yu-Chieh Chiu et al.
PLOS ONE (2013)
Osteoporosis in the European Union: medical management, epidemiology and economic burden
E. Hernlund et al.
ARCHIVES OF OSTEOPOROSIS (2013)
Biodegradation of PVP-CMC hydrogel film: A useful food packaging material
Niladri Roy et al.
CARBOHYDRATE POLYMERS (2012)
Preparation and Properties of Biphasic Calcium Phosphate Scaffolds Multiply Coated with HA/PLLA Nanocomposites for Bone Tissue Engineering Applications
Lei Nie et al.
JOURNAL OF NANOMATERIALS (2012)
In vivo directed differentiation of pluripotent stem cells for skeletal regeneration
Benjamin Levi et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)
In vitro-in vivo evaluation of fast-dissolving tablets containing solid dispersion of pioglitazone hydrochloride
Vinay Pandit et al.
JOURNAL OF ADVANCED PHARMACEUTICAL TECHNOLOGY & RESEARCH (2012)
Porosity and Pore Size Regulate the Degradation Product Profile of Polylactide
Karin Odelius et al.
BIOMACROMOLECULES (2011)
Critical-size calvarial bone defects healing in a mouse model with silk scaffolds and SATB2-modified iPSCs
Jin-Hai Ye et al.
BIOMATERIALS (2011)
β-Chitin hydrogel/nano hydroxyapatite composite scaffolds for tissue engineering applications
P. T. Sudheesh Kumar et al.
CARBOHYDRATE POLYMERS (2011)
Application of Induced Pluripotent Stem (iPS) Cells in Periodontal Tissue Regeneration
Xuejing Duan et al.
JOURNAL OF CELLULAR PHYSIOLOGY (2011)
Biomaterials & scaffolds for tissue engineering
Fergal J. O'Brien
MATERIALS TODAY (2011)
Comparative study of hydroxyapatite and octacalcium phosphate coatings deposited on metallic implants by PLD method
W. Mroz et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2010)
Biodegradable poly(ethylene glycol) hydrogels based on a self-elimination degradation mechanism
Manjeet Deshmukh et al.
BIOMATERIALS (2010)
Controlling the Porosity and Microarchitecture of Hydrogels for Tissue Engineering
Nasim Annabi et al.
TISSUE ENGINEERING PART B-REVIEWS (2010)
Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
Lutz-Christian Gerhardt et al.
MATERIALS (2010)
Biodegradable poly(ε-caprolactone) nanowires for bone tissue engineering applications
Joshua R. Porter et al.
BIOMATERIALS (2009)
Degradability of Polymers for Implantable Biomedical Devices
SuPing Lyu et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2009)
Preparation and characterization of a novel injectable in situ cross-linked hydrogel
Shaohua Sun et al.
POLYMER BULLETIN (2009)
In vitro degradation of three-dimensional porous poly(D,L-lactide-co-glycolide) scaffolds for tissue engineering
LB Wu et al.
BIOMATERIALS (2004)
Macroporous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) matrices for bone tissue engineering
GT Köse et al.
BIOMATERIALS (2003)
Structure and properties of bilayer chitosan-gelatin scaffolds
JS Mao et al.
BIOMATERIALS (2003)
Biphasic calcium phosphate bioceramics: preparation, properties and applications
RZ Legeros et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2003)
Degradation of partially oxidized alginate and its potential application for tissue engineering
KH Bouhadir et al.
BIOTECHNOLOGY PROGRESS (2001)
Composite autogenous bone and demineralized bone matrices used to repair defects in the parietal bone of rabbits
ABM Rabie et al.
BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2000)
Titanium-alloy enhances bone-pedicle screw fixation:: mechanical and histomorphometrical results of titanium-alloy versus stainless steel
FB Christensen et al.
EUROPEAN SPINE JOURNAL (2000)
Composite degradation due to fluid absorption
G Sala
COMPOSITES PART B-ENGINEERING (2000)
分享论文
