相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。3D printed, controlled release, tritherapeutic tablet matrix for advanced anti-HIV-1 drug delivery
Margaret Siyawamwaya et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Retentive device for intravesical drug delivery based on water-induced shape memory response of poly(vinyl alcohol): design concept and 4D printing feasibility
A. Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Additive manufacturing of ceramics for dental applications: A review
Raquel Galante et al.
DENTAL MATERIALS (2019)
Exploration and Preparation of a Dose-Flexible Regulation System for Levetiracetam Tablets via Novel Semi-Solid Extrusion Three-Dimensional Printing
Mengsuo Cui et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
A New Model of a 3D-Printed Shell with Convex Drug Release Profile
Jingzhou Zhao et al.
DISSOLUTION TECHNOLOGIES (2018)
Reshaping drug development using 3D printing
Atheer Awad et al.
DRUG DISCOVERY TODAY (2018)
Development of a dual extrusion printing technique for an acid- and thermo-labile drug
Wiebke Kempin et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Multi-purposable filaments of HPMC for 3D printing of medications with tailored drug release and timed-absorption
Hossam Kadry et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
Gayathri Kollamaram et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Defined drug release from 3D-printed composite tablets consisting of drugloaded polyvinylalcohol and a water-soluble or water-insoluble polymer filler
Tatsuaki Tagami et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printed medicines: A new branch of digital healthcare
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of vaginal rings with personalized shapes for controlled release of progesterone
Junhui Fu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
Muzna Sadia et al.
JOURNAL OF CONTROLLED RELEASE (2018)
Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
Nayan G. Solanki et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament
Jehad M. Nasereddin et al.
PHARMACEUTICAL RESEARCH (2018)
Low-power logic computing realized in a single electric-double-layer MoS2 transistor gated with polymer electrolyte
Junjie Guo et al.
SOLID-STATE ELECTRONICS (2018)
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Sarah J. Trenfield et al.
TRENDS IN PHARMACOLOGICAL SCIENCES (2018)
A Multimaterial Scaffold With Tunable Properties: Toward Bone Tissue Repair
Pei Feng et al.
ADVANCED SCIENCE (2018)
3D printed drug products: Non-destructive dose verification using a rapid point-and-shoot approach
Sarah J. Trenfield et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Immunomodulating Nanomedicine for Cancer Therapy
Zhigang Liu et al.
NANO LETTERS (2018)
3D Printing Technology in Customized Drug Delivery System: Current State of the Art, Prospective and the Challenges
Farooq A. Khan et al.
CURRENT PHARMACEUTICAL DESIGN (2018)
Facile Synthesis of Nitrogen-Doped Microporous Carbon Spheres for High Performance Symmetric Supercapacitors
Zhongguan Liang et al.
NANOSCALE RESEARCH LETTERS (2018)
3D printed drug delivery devices: perspectives and technical challenges
Mirja Palo et al.
EXPERT REVIEW OF MEDICAL DEVICES (2017)
Patient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings
Zaid Muwaffak et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Selective laser sintering (SLS) 3D printing of medicines
Fabrizio Fina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Preparation and investigation of controlled-release glipizide novel oral device with three-dimensional printing
Qijun Li et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
A ZnO/PVA/PAADDA composite electrode for rechargeable zinc-air battery
Liang Zhou et al.
IONICS (2017)
Anti-tuberculosis drug combination for controlled oral delivery using 3D printed compartmental dosage forms: From drug product design to in vivo testing
Natalja Genina et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Intercalated 2D nanoclay for emerging drug delivery in cancer therapy
Yi Zhang et al.
NANO RESEARCH (2017)
Few-layered MoS2/C with expanding d-spacing as a high-performance anode for sodium-ion batteries
Peng Zhang et al.
NANOSCALE (2017)
Halloysite Nanotubes Supported Ag and ZnO Nanoparticles with Synergistically Enhanced Antibacterial Activity
Zhan Shu et al.
NANOSCALE RESEARCH LETTERS (2017)
Yolk @ cage-Shell Hollow Mesoporous Monodispersion Nanospheres of Amorphous Calcium Phosphate for Drug Delivery with High Loading Capacity
Suping Huang et al.
NANOSCALE RESEARCH LETTERS (2017)
Enhanced performance of multilayer MoS2 transistor employing a polymer capping layer
Junjie Guo et al.
ORGANIC ELECTRONICS (2017)
Halloysite Nanotubes Supported Ag and ZnO Nanoparticles with Synergistically Enhanced Antibacterial Activity
Zhan Shu et al.
NANOSCALE RESEARCH LETTERS (2017)
Yolk @ cage-Shell Hollow Mesoporous Monodispersion Nanospheres of Amorphous Calcium Phosphate for Drug Delivery with High Loading Capacity
Suping Huang et al.
NANOSCALE RESEARCH LETTERS (2017)
Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone
Xuyu Chai et al.
SCIENTIFIC REPORTS (2017)
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
James Norman et al.
ADVANCED DRUG DELIVERY REVIEWS (2017)
Hydroxypropyl methylcellulose-based controlled release dosage by melt extrusion and 3D printing: Structure and drug release correlation
Jiaxiang Zhang et al.
CARBOHYDRATE POLYMERS (2017)
Low-temperature-cured highly conductive composite of Ag nanowires & polyvinyl alcohol
Song He et al.
CHINESE PHYSICS B (2017)
Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices
Natalja Genina et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
Muqdad Alhijjaj et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Jie Wang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole Jonathan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Mohamed A. Alhnan et al.
PHARMACEUTICAL RESEARCH (2016)
Printing Tablets with Fully Customizable Release Profiles for Personalized Medicine
Yajuan Sun et al.
ADVANCED MATERIALS (2015)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Effect of geometry on drug release from 3D printed tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
Alice Melocchi et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
Fused-filament 3D printing (3DP) for fabrication of tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Stereolithography in tissue engineering
Shelby A. Skoog et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)
Extrusion printed polymer structures: A facile and versatile approach to tailored drug delivery platforms
Parawee Rattanakit et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
Preparation of Antibacterial Color-Coated Steel Sheets
Guoliang Li et al.
INTERNATIONAL JOURNAL OF PHOTOENERGY (2012)
FABRICATION OPTIMIZATION OF NANOHYDROXYAPATITE ARTIFICIAL BONE SCAFFOLDS
Cijun Shuai et al.
NANO (2012)
Design of psyllium-PVA-acrylic acid based novel hydrogels for use in antibiotic drug delivery
Baljit Singh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2010)
A poly(D,L-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Ferry P. W. Melchels et al.
BIOMATERIALS (2009)
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Deng-Guang Yu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2009)
Assortative Pairing and Life History Strategy A Cross-Cultural Study
Aurelio Jose Figueredo et al.
HUMAN NATURE-AN INTERDISCIPLINARY BIOSOCIAL PERSPECTIVE (2009)
Levofloxacin implants with predefined microstructure fabricated by three-dimensional printing technique
Weidong Huang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Laser stereolithography and supercritical fluid processing or custom-designed implant fabrication
VK Popov et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2004)
Morning blood pressure peak, QT intervals, and sympathetic activity in hypertensive patients
R Marfella et al.
HYPERTENSION (2003)
Oral dosage forms fabricated by Three Dimensional Printing™
WE Katstra et al.
JOURNAL OF CONTROLLED RELEASE (2000)
分享论文
