相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Advancing Frontiers in Bone Bioprinting
Nureddin Ashammakhi et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Pouyan Ahangar et al.
APPLIED SCIENCES-BASEL (2019)
The Adoption of Three-Dimensional Additive Manufacturing from Biomedical Material Design to 3D Organ Printing
Ajay Vikram Singh et al.
APPLIED SCIENCES-BASEL (2019)
iPSC Bioprinting: Where are We at?
Sara Romanazzo et al.
MATERIALS (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone
Ali Entezari et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Comparative Analysis of Wollastonite-Diopside Glass-Ceramic Structures Fabricated via Stereo-Lithography
Hamada Elsayed et al.
ADVANCED ENGINEERING MATERIALS (2019)
Application of high resolution DLP stereolithography for fabrication of tricalcium phosphate scaffolds for bone regeneration
Christina Schmidleithner et al.
BIOMEDICAL MATERIALS (2019)
Three-dimensional patterning in biomedicine: Importance and applications in neuropharmacology
Ajay Vikram Singh et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
In situ handheld three-dimensional bioprinting for cartilage regeneration
Claudia Di Bella et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2018)
3D-printed scaffolds with bioactive elements-induced photothermal effect for bone tumor therapy
Yaqin Liu et al.
ACTA BIOMATERIALIA (2018)
The cross-disciplinary emergence of 3D printed bioceramic scaffolds in orthopedic bioengineering
Hossein E. Jazayeri et al.
CERAMICS INTERNATIONAL (2018)
Techniques for fabrication and construction of three-dimensional bioceramic scaffolds: Effect on pores size, porosity and compressive strength
Fadilah Darus et al.
CERAMICS INTERNATIONAL (2018)
Effects of Hyaluronic Acid and Hydroxyapatite/Beta-tricalcium Phosphate in Combination on Bone Regeneration of a Critical-size Defect in an Experimental Model
Nurettin Diker et al.
JOURNAL OF CRANIOFACIAL SURGERY (2018)
3D powder printed tetracalcium phosphate scaffold with phytic acid binder: fabrication, microstructure and in situ X-Ray tomography analysis of compressive failure
Sourav Mandal et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2018)
Mechanobiologically optimized 3D titanium-mesh scaffolds enhance bone regeneration in critical segmental defects in sheep
Anne-Marie Pobloth et al.
SCIENCE TRANSLATIONAL MEDICINE (2018)
Hierarchical Design of Tissue Regenerative Constructs
Jonas C. Rose et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Clinical and Research Approaches to Treat Non-union Fracture
Claudia Schlundt et al.
CURRENT OSTEOPOROSIS REPORTS (2018)
3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy
Hongshi Ma et al.
ACTA BIOMATERIALIA (2018)
Current state of fabrication technologies and materials for bone tissue engineering
Abiy Wubneh et al.
ACTA BIOMATERIALIA (2018)
A Review of 3D Printing Technology for Medical Applications
Qian Yan et al.
ENGINEERING (2018)
Bone tissue engineering via growth factor delivery: from scaffolds to complex matrices
Tinke-Marie De Witte et al.
REGENERATIVE BIOMATERIALS (2018)
Effect of microporosity on scaffolds for bone tissue engineering
Ke Zhang et al.
REGENERATIVE BIOMATERIALS (2018)
The Induction of Bone Formation: The Translation Enigma
Roland M. Klar
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2018)
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Ryan Trombetta et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Fabrication of osteoconductive Ca3-x M2x (PO4)2 (M = Na, K) calcium phosphate bioceramics by stereolithographic 3D printing
V. I. Putlyaev et al.
INORGANIC MATERIALS (2017)
SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems
Y. de Hazan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Direct ink writing of wollastonite-diopside glass-ceramic scaffolds from a silicone resin and engineered fillers
Hamada Elsayed et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Porous 45S5 Bioglass®-based scaffolds using stereolithography: Effect of partial pre-sintering on structural and mechanical properties of scaffolds
Boonlom Thavornyutikarn et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
The effect of calcium sulfate incorporation on physiochemical and biological properties of 3D-printed mesoporous calcium silicate cement scaffolds
Peng Pei et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2017)
Solid Freeform Techniques Application in Bone Tissue Engineering for Scaffold Fabrication
Saurabh Shivalkar et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
A 3D-printed scaffold with MoS2 nanosheets for tumor therapy and tissue regeneration
Xiaocheng Wang et al.
NPG ASIA MATERIALS (2017)
3D Bioprinting for Cartilage and Osteochondral Tissue Engineering
Andrew C. Daly et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Solid Freeform Techniques Application in Bone Tissue Engineering for Scaffold Fabrication
Saurabh Shivalkar et al.
TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)
Study on surface quality, precision and mechanical properties of 3D printed ZrO2 ceramic components by laser scanning stereolithography
Hongyu Xing et al.
CERAMICS INTERNATIONAL (2017)
Recent advances in 3D printing of porous ceramics: A review
Lim Chin Hwa et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
3D-Printed Bioactive Ca3SiO5 Bone Cement Scaffolds with Nano Surface Structure for Bone Regeneration
Chen Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Sensitivity analysis of material and process parameters in finite element modeling of selective laser melting of Inconel 625
Luis E. Criales et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Development of bioceramic bone scaffolds by introducing triple liquid phases
Cijun Shuai et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Robocasting of structural ceramic parts with hydrogel inks
Ezra Feilden et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment
Alok Kumar et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2016)
Shaping ceramics through indirect selective laser sintering
Jan Patrick Deckers et al.
RAPID PROTOTYPING JOURNAL (2016)
Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review
Nicolas Martelli et al.
SURGERY (2016)
Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects
Seyed-Iman Roohani-Esfahani et al.
SCIENTIFIC REPORTS (2016)
Development of the Biopen: a handheld device for surgical printing of adipose stem cells at a chondral wound site
Cathal D. O'Connell et al.
BIOFABRICATION (2016)
Three-Dimensional Printing of Hollow-Struts-Packed Bioceramic Scaffolds for Bone Regeneration
Yongxiang Luo et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Bioactive glasses beyond bone and teeth: Emerging applications in contact with soft tissues
Valentina Miguez-Pacheco et al.
ACTA BIOMATERIALIA (2015)
Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications
Song XiaoHui et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Biological aspects of segmental bone defects management
Ivo Dumic-Cule et al.
INTERNATIONAL ORTHOPAEDICS (2015)
Mesoporous bioactive glass nanolayer-functionalized 3D-printed scaffolds for accelerating osteogenesis and angiogenesis
Yali Zhang et al.
NANOSCALE (2015)
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
Seyed Farid Seyed Shirazi et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2015)
Bone tissue regeneration: the role of scaffold geometry
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2015)
Recent advances in 3D printing of biomaterials
Helena N. Chia et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2015)
Selective laser sintering of β-TCP/nano-58S composite scaffolds with improved mechanical properties
Jinglin Liu et al.
MATERIALS & DESIGN (2015)
A Nonequilibrium Thermal Model for Direct Metal Laser Sintering
Jin Wang et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2015)
3D-printed silicate porous bioceramics using a non-sacrificial preceramic polymer binder
A. Zocca et al.
BIOFABRICATION (2015)
Vascularization in Bone Tissue Engineering Constructs
Angel E. Mercado-Pagan et al.
ANNALS OF BIOMEDICAL ENGINEERING (2015)
Building components for an outpost on the Lunar soil by means of a novel 3D printing technology
Giovanni Cesaretti et al.
ACTA ASTRONAUTICA (2014)
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Jason A. Inzana et al.
BIOMATERIALS (2014)
Incidence of donor site morbidity following harvesting from iliac crest or RIA graft
G. M. Calori et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2014)
Additive manufacturing of zirconia parts by indirect selective laser sintering
Khuram Shahzad et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering
Siamak Eqtesadi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Induction of bone formation in biphasic calcium phosphate scaffolds by bone morphogenetic protein-2 and primary osteoblasts
L. A. Strobel et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2014)
Printability of calcium phosphate: Calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique
Zuoxin Zhou et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Effect of Layer Thickness and Printing Orientation on Mechanical Properties and Dimensional Accuracy of 3D Printed Porous Samples for Bone Tissue Engineering
Arghavan Farzadi et al.
PLOS ONE (2014)
Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects
Miguel Castilho et al.
BIOFABRICATION (2014)
Application of a 3D printed customized implant for canine cruciate ligament treatment by tibial tuberosity advancement
Miguel Castilho et al.
BIOFABRICATION (2014)
Enhancement mechanisms of graphene in nano-58S bioactive glass scaffold: mechanical and biological performance
Chengde Gao et al.
SCIENTIFIC REPORTS (2014)
A review on 3D micro-additive manufacturing technologies
Mohammad Vaezi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Depth and width of cured lines in photopolymerizable ceramic suspensions
Susan P. Gentry et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering
Solaiman Tarafder et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2013)
Fabrication and Characterization of Porous 45S5 Glass Scaffolds via Direct Selective Laser Sintering
Jinglin Liu et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Enhanced sintering ability of biphasic calcium phosphate by polymers used for bone scaffold fabrication
Chengde Gao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Bone tissue engineering using 3D printing
Susmita Bose et al.
MATERIALS TODAY (2013)
Development of Composite Scaffolds for Load-Bearing Segmental Bone Defects
Marcello Pilia et al.
BIOMED RESEARCH INTERNATIONAL (2013)
Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds
Andre Butscher et al.
ACTA BIOMATERIALIA (2012)
Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: A review
Susmita Bose et al.
ACTA BIOMATERIALIA (2012)
Effect of pore geometry and loading direction on deformation mechanism of rapid prototyped scaffolds
Soodeh Amirkhani et al.
ACTA MATERIALIA (2012)
Treatment of long bone defects and non-unions: from research to clinical practice
Arne Berner et al.
CELL AND TISSUE RESEARCH (2012)
Biomedical production of implants by additive electro-chemical and physical processes
Paulo Bartolo et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds
Gary A. Fielding et al.
DENTAL MATERIALS (2012)
3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis
Chengtie Wu et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Effect of material, process parameters, and simulated body fluids on mechanical properties of 13-93 bioactive glass porous constructs made by selective laser sintering
Krishna C. R. Kolan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
Processing of 45S5 Bioglass® by lithography-based additive manufacturing
Passakorn Tesavibul et al.
MATERIALS LETTERS (2012)
Process parameters appraisal of fabricating ceramic parts based on stereolithography using the Taguchi method
Zhangwei Chen et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Hierarchical structure and mechanical properties of nacre: a review
Jiyu Sun et al.
RSC ADVANCES (2012)
Bioceramics: From Bone Regeneration to Cancer Nanomedicine
Maria Vallet-Regi et al.
ADVANCED MATERIALS (2011)
Bone regeneration: current concepts and future directions
Rozalia Dimitriou et al.
BMC MEDICINE (2011)
The use of bone-graft substitutes in large bone defects: Any specific needs?
G. M. Calori et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2011)
Autogenous Bone Graft: Donor Sites and Techniques
Chad Myeroff et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2011)
Design and fabrication of a novel porous implant with pre-set channels based on ceramic stereolithography for vascular implantation
Weiguo Bian et al.
BIOFABRICATION (2011)
Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering
Krishna C. R. Kolan et al.
BIOFABRICATION (2011)
Ceramic scaffolds produced by computer-assisted 3D printing and sintering: characterization and biocompatibility investigations
Patrick H. Warnke et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2010)
3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects
Uwe Klammert et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2010)
Low temperature fabrication of magnesium phosphate cement scaffolds by 3D powder printing
Uwe Klammert et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2010)
Scaffold Design and Manufacturing: From Concept to Clinic
Scott J. Hollister
ADVANCED MATERIALS (2009)
Maxillofacial reconstruction using custom-made artificial bones fabricated by inkjet printing technology
Hideto Saijo et al.
JOURNAL OF ARTIFICIAL ORGANS (2009)
Mechanical and in vitro performance of apatite-wollastonite glass ceramic reinforced hydroxyapatite composite fabricated by 3D-printing
J. Suwanprateeb et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)
Biomanufacturing for tissue engineering: Present and future trends
P. J. Bartolo et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2009)
3D Powder Printing of beta-Tricalcium Phosphate Ceramics Using Different Strategies
Elke Vorndran et al.
ADVANCED ENGINEERING MATERIALS (2008)
A review of rapid prototyping techniques for tissue engineering purposes
Sanna M. Peltola et al.
ANNALS OF MEDICINE (2008)
The morphology of anisotropic 3D-printed hydroxyapatite scaffolds
Fabienne C. Fierz et al.
BIOMATERIALS (2008)
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Pedro Miranda et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Tough, Bio-Inspired Hybrid Materials
E. Munch et al.
SCIENCE (2008)
Resorbable dicalcium phosphate bone substitutes prepared by 3D powder printing
Uwe Gbureck et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Quantification of various growth factors in different demineralized bone matrix preparations
B. Wildemann et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Development of a bone scaffold using HA nanopowder and micro-stereolithography technology
Jong Young Kim et al.
MICROELECTRONIC ENGINEERING (2007)
Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants
Alaadien Khalyfa et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2007)
Effect of particle size, crystal phase and crystallinity on the reactivity of tricalcium phosphate cements for bone reconstruction
Tobias J. Brunner et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
Direct ink writing of 3D functional materials
Jennifer A. Lewis
ADVANCED FUNCTIONAL MATERIALS (2006)
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
P Miranda et al.
ACTA BIOMATERIALIA (2006)
Biocompatibility of ceramic scaffolds for bone replacement made by 3D printing
B Leukers et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2005)
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
S Michna et al.
BIOMATERIALS (2005)
Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering
H Seitz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Processing of an apatite-mullite glass-ceramic and an hydroxyapatite/phosphate glass composite by selective laser sintering
JC Lorrison et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2005)
Customization of load-bearingy hydroxyapatite lattice scaffolds
J Cesarano et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2005)
Nanoparticle inks for directed assembly of three-dimensional periodic structures
Q Li et al.
ADVANCED MATERIALS (2003)
Mechanical activation and cement formation of β-tricalcium phosphate
U Gbureck et al.
BIOMATERIALS (2003)
Stereolithography of structural complex ceramic parts
T Chartier et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Direct-write assembly of ceramics from colloidal inks
JA Lewis
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2002)
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
TMG Chu et al.
BIOMATERIALS (2002)
Strength of green ceramics with low binder content
SA Uhland et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)
Custom cranioplasty using stereolithography and acrylic
PS D'Urso et al.
BRITISH JOURNAL OF PLASTIC SURGERY (2000)
Tissue-engineered bone regeneration
H Petite et al.
NATURE BIOTECHNOLOGY (2000)
分享论文
