Color dimensions of additive manufactured interim restorative dental material

Statement of problem. Interim dental restorations can be fabricated by using additive manufacturing (AM) technologies. Although dental restoration contours can be easily and accurately fabricated by using computer-aided design (CAD) procedures, protocols for creating predictable color dimensions of AM interim restorations are lacking. Purpose. The purpose of this in vitro study was to measure and compare color dimensions of different AM and conventional interim restorative materials. Material and methods. Disks (N=420) were fabricated by using either conventionally (CNV group) or additively manufactured (AM group) materials. The CNV group was further divided into the subgroups CNV-1 (Protemp 4; 3M ESPE) and CNV-2 (Anaxdent new outline dentin; Anaxdent). AM subgroups included AM-1 (FreePrint temp; Detax), AM-2 (E-Dent 400; Envisiontec), AM-3 (NextDent C & B; NextDent), AM-4 (NextDent C&B MFH; NextDent), and AM-5 (Med620 VEROGIaze; Stratasys). Color measurements in the CIELab coordinates were made by using a spectrophotometer (VITA EasyShade Advance 4.0; VITA) with a standardized photography gray card as a background under room light conditions (1003 lux). Color difference (Delta E*) values were calculated by using the CIE76 and CIEDE2000 formulas. The data were analyzed by using the Kruskal-Wallis test with nonparametric pairwise comparisons. Results. Owing to a software error, the spectrophotometer was unable to measure the color of any specimens in the AM-5 subgroup, which was consequently excluded from further analysis. Significant differences (P=.001) between 2 manufacturing groups were found based on the L* variable. All subgroups were significantly different from each other for all 3 variables (P<.001). Pairwise comparisons revealed that all groups were significantly different from each other, except for the AM-1 and AM-2 subgroups, compared with the CNV-1 subgroup for the L* color dimension. The Delta E* values calculated by using the CIE76 formula varied from 6.63 to 23.1 and by using the CIEDE2000 formula from 3.43 to 10.21, suggesting a perceptible and unacceptable color mismatch between the CNV and AM groups. Conclusions. None of the additively manufactured interim materials tested matched the conventional interim materials in all 3 CIELab color dimensions.