4.7 Article

Investigation of the fatigue modulus decay in cement stabilized base material by considering the difference between compressive and tensile modulus

期刊

CONSTRUCTION AND BUILDING MATERIALS
卷 223, 期 -, 页码 491-502

出版社

ELSEVIER SCI LTD
DOI: 10.1016/j.conbuildmat.2019.07.003

关键词

Cement stabilized macadam; Fatigue damage; Modulus decay; Tensile modulus; Compressive modulus

资金

  1. National Natural Science Foundation of China [51578081, 51608058]
  2. Ministry of Transport Construction Projects of Science and Technology [2015318825120]
  3. projects of Transportation Science and Technology of Hunan [201701]
  4. Key Projects of Hunan Province Technological Innovation Project in Industry [2016GK2096]

向作者/读者索取更多资源

The cement stabilized macadam base experiences tensile and compressive stresses simultaneously in the actual pavement structures, resulting in the influence of stress states on fatigue performance. In this paper, the fatigue performance of cement stabilized macadam was analyzed based on modulus decay considering the difference between compressive and tensile modulus. A synchronous measurement method of tensile and compressive modulus, which based on convention four-point bending test, was utilized to measure modulus of cement stabilized macadam during a fatigue test. The four-point bending fatigue test was conducted upon four different stress levels of 0.25 MPa, 0.5 MPa, 1.0 MPa, and 1.5 MPa. The average of 10 closest modulus values nearby the first 1% of fatigue life was adopted to determine the initial modulus. The last 5 cycles before the failure of the specimen in the fatigue test was determined as the critical modulus value. It was observed from the tests results that the critical value of compressive fatigue modulus was 8 times higher than that of tensile fatigue modulus. The initial and critical values of both tensile and compression decreased with the increase of stress levels. Under different stress levels, the modulus decay mode of tensile and compressive modulus was similar, but the decay rates of tensile modulus were higher than that of compressive modulus. Based on the modulus decay mode, the concept of critical failure point was put forward to characterize the fatigue behavior of cement stabilized macadam. During the fatigue process, both tensile and compressive modulus decay presented three stages, i.e. preliminary stage, stable stage, and rapid attenuation stage. The stable stage of tensile modulus was shorter than that of compressive modulus, which means that the primary fatigue damage occurred in the tensile zone. (C) 2019 Elsevier Ltd. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据