相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Two-Dimensional Mapping of In-plane Residual Stress with Slitting
M. D. Olson et al.
EXPERIMENTAL MECHANICS (2018)
Applicability of the Magnetic Barkhausen Noise Method for Nondestructive Measurement of Residual Stresses in the Carburized and Tempered 19CrNi5H Steels
H. Hizli et al.
RESEARCH IN NONDESTRUCTIVE EVALUATION (2018)
A novel approach to evaluate mixed-mode SIFs for a through-thickness crack in a welding residual stress field using an effective welding simulation method
Ramy Gadallah et al.
ENGINEERING FRACTURE MECHANICS (2018)
Validation of a Contour Method Single-Measurement Uncertainty Estimator
M. D. Olson et al.
EXPERIMENTAL MECHANICS (2018)
Quantitative estimation of nonmonotonic residual stress depth-profiles using an extended Kypris-Jiles model of the magnetic Barkhausen noise spectrum
Aitor Lasaosa et al.
JOURNAL OF APPLIED PHYSICS (2018)
Residual stress determination by optical interferometric measurements of hole diameter increments
Vladimir Pisarev et al.
OPTICS AND LASERS IN ENGINEERING (2018)
A procedure for high residual stresses measurement using the ring-core method
R. Moharrami et al.
STRAIN (2018)
A general metrology of stress on crystalline silicon with random crystal plane by using micro-Raman spectroscopy
Wei Qiu et al.
ACTA MECHANICA SINICA (2018)
Influence factors analysis and accuracy improvement for stress measurement using ultrasonic longitudinal critically refracted (LCR) wave
Haibo Liu et al.
APPLIED ACOUSTICS (2018)
On the reliability of residual stress measurements in polycarbonate samples by the hole drilling method
A. Magnier et al.
POLYMER TESTING (2018)
Comparison Between Using Longitudinal and Shear Waves in Ultrasonic Stress Measurement to Investigate the Effect of Post-Weld Heat-Treatment on Welding Residual Stresses
Yashar Javadi et al.
RESEARCH IN NONDESTRUCTIVE EVALUATION (2017)
Combining the crack compliance method and speckle interferometry data for determination of stress intensity factors and T-stresses
V. S. Pisarev et al.
ENGINEERING FRACTURE MECHANICS (2017)
Evaluation of Errors Associated with Cutting-Induced Plasticity in Residual Stress Measurements Using the Contour Method
Y. L. Sun et al.
EXPERIMENTAL MECHANICS (2017)
Effect of Temperature and Stress on Residual Magnetic Signals in Ferromagnetic Structural Steel
Haihong Huang et al.
IEEE TRANSACTIONS ON MAGNETICS (2017)
Study on characteristics of magnetic memory testing signal based on the stress concentration field
Bin Liu et al.
IET SCIENCE MEASUREMENT & TECHNOLOGY (2017)
Assessment of the Local Residual Stresses of 7050-T7452 Aluminum Alloy in Microzones by the Instrumented Indentation with the Berkovich Indenter
M. He et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Comparison of Electronic Speckle Laser Interferometry Hole-Drilling and X-ray Diffraction Techniques for Determination of Residual Stresses in the Heat Treated Steels
H. Hizli et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2017)
Measurements of residual stress and microstructural evolution in electron beam welded Ti-6Al-4V using multiple techniques
William Rae et al.
MATERIALS CHARACTERIZATION (2017)
Evaluation of the Influence of External Factors in Ultrasonic Testing of Stress-Strain States
M. Ya Marusina et al.
MEASUREMENT TECHNIQUES (2017)
Proposal for a direct-method for stress measurement using an X-ray area detector
Kenji Suzuki
NDT & E INTERNATIONAL (2017)
Spatial carrier color digital speckle pattern interferometry for absolute three-dimensional deformation measurement
Xinya Gao et al.
OPTICAL ENGINEERING (2017)
Measurement of microscale residual stresses in multi-phase ceramic composites using Raman spectroscopy
Phillip Jannotti et al.
ACTA MATERIALIA (2017)
Nondestructive Testing and Characterization of Residual Stress Field Using an Ultrasonic Method
Song Wentao et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2016)
Measurement of residual stress in a multi-layer semiconductor heterostructure by micro-Raman spectroscopy
Wei Qiu et al.
ACTA MECHANICA SINICA (2016)
Velocity measurements of cylindrical surface waves with a large aperture line-focus acoustic transducer
Guorong Song et al.
MEASUREMENT (2016)
Synchronous measurement of three-dimensional deformations by multicamera digital speckle patterns interferometry
Yonghong Wang et al.
OPTICAL ENGINEERING (2016)
Measurement methods of ultrasonic transducer sensitivity
Dingguo Xiao et al.
ULTRASONICS (2016)
An improved method for point deflection measurements on rectangular membranes
Benoit Merle et al.
MATERIALS & DESIGN (2016)
A novel method for determining surface residual stress components and their directions in spherical indentation
Lei Shen et al.
JOURNAL OF MATERIALS RESEARCH (2015)
On the correlation between microstructural evolution and ultrasonic properties: a review
Meysam Toozandehjani et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Discussion of Derivability of Local Residual Stress Level from Magnetic Stray Field Measurement
Marek Augustyniak et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2015)
Study on Metal Magnetic Memory Testing Mechanism
B. Liu et al.
RESEARCH IN NONDESTRUCTIVE EVALUATION (2015)
Residual stress measurement in DLC films deposited by PBIID method using Raman microprobe spectroscopy
Yasuhiro Miki et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding
Pu Xie et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2015)
Estimation of Uncertainty for Contour Method Residual Stress Measurements
M. D. Olson et al.
EXPERIMENTAL MECHANICS (2015)
Nondestructive Testing Residual Stress Using Ultrasonic Critical Refracted Longitudinal Wave
Chunguang Xu et al.
PROCEEDINGS OF THE 2015 ICU INTERNATIONAL CONGRESS ON ULTRASONICS (2015)
Review of Electronic Speckle Pattern Interferometry (ESPI) for Three Dimensional Displacement Measurement
Yang Lianxiang et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2014)
Influence of Drilling Parameters on the Accuracy of Hole-drilling Residual Stress Measurements
M. Steinzig et al.
EXPERIMENTAL MECHANICS (2014)
A method for reconstruction of residual stress fields from measurements made in an incompatible region
H. E. Coules et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)
Investigation of Stress and Temperature Effect on the Longitudinal Ultrasonic Waves in Polymers
Dawei Jia et al.
RESEARCH IN NONDESTRUCTIVE EVALUATION (2014)
A critical comparison between XRD and FIB residual stressmeasurement techniques in thin films
E. Bemporad et al.
THIN SOLID FILMS (2014)
Improvement of the Contour Method for Measurement of Near-Surface Residual Stresses from Laser Peening
M. B. Toparli et al.
EXPERIMENTAL MECHANICS (2013)
Reconstruction of the residual stresses in a hyperelastic body using ultrasound techniques
Sunnie Joshi et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2013)
An industrial workflow to minimise part distortion for machining of large monolithic components in aerospace industry
D. Chantzis et al.
14TH CIRP CONFERENCE ON MODELING OF MACHINING OPERATIONS (CIRP CMMO) (2013)
Magnetic Barkhausen Noise, Metal Magnetic Memory Testing and Estimation of the Ship Plate Welded Structure Stress
Qi Xin et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2012)
Methods of measuring residual stresses in components
N. S. Rossini et al.
MATERIALS & DESIGN (2012)
Evaluation of residual stress in ferromagnetic steels based on residual magnetic field measurements
Maciej Roskosz et al.
NDT & E INTERNATIONAL (2012)
Development of an improved energy-based method for residual stress assessment
Hongping Jin et al.
PHILOSOPHICAL MAGAZINE (2012)
Determination of residual stresses and material properties by an energy-based method using artificial neural networks
Hongping Jin et al.
PROCEEDINGS OF THE ESTONIAN ACADEMY OF SCIENCES (2012)
Use of nanoindentation to measure residual stresses in surface layers
J. Dean et al.
ACTA MATERIALIA (2011)
Effect of residual stress on the nanoindentation response of aerospace aluminium alloys
M. K. Khan et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
Evaluation of Barkhausen Noise and Magnetoacoustic Emission Signals Properties for Plastically Deformed Armco Iron
Leszek Piotrowski et al.
IEEE TRANSACTIONS ON MAGNETICS (2010)
Evaluation of residual stresses and strains using the Eigenstrain Reconstruction Method
Tea-Sung Jun et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Quantitative study of metal magnetic memory signal versus local stress concentration
Z. D. Wang et al.
NDT & E INTERNATIONAL (2010)
High-precision determination of residual stress of polycrystalline coatings using optimised XRD-sin2ψ technique
Q. Luo et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Effect of non-uniform stress characteristics on stress measurement in specimen
Liao Kai et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Reconstruction of residual stresses in autofrettaged thick-walled tubes from limited measurements
G. H. Farrahi et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2009)
An FEM study on residual stresses induced by high-speed end-milling of hardened steel SKD11
J. L. Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Nanoscale residual stress-field mapping around nanoindents in SiC by IR s-SNOM and confocal Raman microscopy
Alexander M. Gigler et al.
OPTICS EXPRESS (2009)
Evaluation of 2D, 3D and applied plastic strain methods for predicting buckling welding distortion and residual stress
P. Michaleris et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)
Estimation of residual stresses from elastic recovery of nanoindentation
Z. -H. Xu et al.
PHILOSOPHICAL MAGAZINE (2006)
Residual stress measurement using the hole drilling method and laser speckle interferometry Part II: Analysis technique
E Ponslet et al.
EXPERIMENTAL TECHNIQUES (2003)
Residual stress measurement using the hole drilling method and laser speckle interferometry: Part I
M Steinzig et al.
EXPERIMENTAL TECHNIQUES (2003)
Residual stress measurement using the hole drilling method and laser speckle interferometry Part IV: Measurement accuracy
M Steinzig et al.
EXPERIMENTAL TECHNIQUES (2003)
Measurement of residual stress by load and depth sensing indentation with spherical indenters
JG Swadener et al.
JOURNAL OF MATERIALS RESEARCH (2001)
Overview -: Residual stress part 1 -: Measurement techniques
PJ Withers et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
Cross-sectional mapping of residual stresses by measuring the surface contour after a cut
MB Prime
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2001)
Investigations of crystallinity and residual stress of cubic boron nitride films by Raman spectroscopy
WJ Zhang et al.
PHYSICAL REVIEW B (2001)
分享论文
