相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
Martin Spoerk et al.
POLYMER COMPOSITES (2019)
Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication
A. Khudiakova et al.
ADDITIVE MANUFACTURING (2019)
On the additive manufacturing of an energy storage device from recycled material
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2019)
Recycled polypropylene blends as novel 3D printing materials
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2019)
Designing for Big Area Additive Manufacturing
Alex Roschli et al.
ADDITIVE MANUFACTURING (2019)
The influence of forced-air cooling on a 3D printed PLA part manufactured by fused filament fabrication
Chun-Ying Lee et al.
ADDITIVE MANUFACTURING (2019)
Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid
Shahriar Bakrani Balani et al.
ADDITIVE MANUFACTURING (2019)
Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation
Santiago Cano et al.
ADDITIVE MANUFACTURING (2019)
The Effects of Iron, Silicon, Chromium, and Aluminum Additions on the Physical and Mechanical Properties of Recycled 3D Printing Filaments
Guan-Ting Pan et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication
Martin Spoerk et al.
PLASTICS RUBBER AND COMPOSITES (2018)
Model analysis of feedstock behavior in fused filament fabrication: Enabling rapid materials screening
Eric L. Gilmer et al.
POLYMER (2018)
Large scale additive manufacturing of eco-composites
J. F. Horta et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2018)
Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used in 3D printing
Xing Guan Zhao et al.
APPLIED SURFACE SCIENCE (2018)
Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
Martin Spoerk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
David Stoof et al.
COMPOSITES PART B-ENGINEERING (2018)
Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments
A. S. J. Suiker
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing
Baris Kaynak et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Polypropylene Filled With Glass Spheres in Extrusion-Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication
Florian Arbeiter et al.
POLYMER TESTING (2018)
Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
POLYMERS (2018)
Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties
Aubrey L. Woern et al.
MATERIALS (2018)
Effect of initial filament moisture content on the microstructure and mechanical performance of ULTEM® 9085 3D printed parts
R. J. Zaldivar et al.
ADDITIVE MANUFACTURING (2018)
RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
Aubrey L. Woern et al.
HARDWAREX (2018)
3D printing of extremely viscous materials using ultrasonic vibrations
I. E. Gunduz et al.
ADDITIVE MANUFACTURING (2018)
Feasibility study on additive manufacturing of recyclable objects for space applications
Miranda Fateri et al.
ADDITIVE MANUFACTURING (2018)
Nozzle clogging factors during fused filament fabrication of spherical particle filled polymers
Tobias Beran et al.
ADDITIVE MANUFACTURING (2018)
Complex flow and temperature history during melt extrusion in material extrusion additive manufacturing
Fang Peng et al.
ADDITIVE MANUFACTURING (2018)
Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing
Kevin R. Hart et al.
ADDITIVE MANUFACTURING (2018)
Synchronized material deposition rate control with path velocity on fused filament fabrication machines
Deniz Sera Ertay et al.
ADDITIVE MANUFACTURING (2018)
Recycled polyethylene terephthalate as a new FFF feedstock material
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2018)
A challenge for enhancing the dimensional accuracy of a low-cost 3D printer by means of self-replicated parts
P. Minetola et al.
ADDITIVE MANUFACTURING (2018)
Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material
Siewhui Chong et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)
Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Additive Manufacturing Based on Welding Arc: A low-Cost Method
Yanhu Wang et al.
JOURNAL OF SURFACE INVESTIGATION (2017)
Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Sustainable Composite Fused Deposition Modelling Filament Using Post-Consumer Recycled Polypropylene
Kim L Pickering et al.
JOURNAL OF COMPOSITES SCIENCE (2017)
Polymer recycling in an open-source additive manufacturing context: Mechanical issues
Fabio A. Cruz Sanchez et al.
ADDITIVE MANUFACTURING (2017)
In situ real time defect detection of 3D printed parts
Oliver Holzmond et al.
ADDITIVE MANUFACTURING (2017)
Characterizing the Mechanical Properties of Fused Deposition Modelling Natural Fiber Recycled Polypropylene Composites
M. Milosevic et al.
JOURNAL OF COMPOSITES SCIENCE (2017)
Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers
Rafael Thiago Luiz Ferreira et al.
COMPOSITES PART B-ENGINEERING (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Diels-Alder Reversible Thermoset 3D Printing: Isotropic Thermoset Polymers via Fused Filament Fabrication
Kejia Yang et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Closed loop control of slippage during filament transport in molten material extrusion
Gabriel Pieter Greeff et al.
ADDITIVE MANUFACTURING (2017)
Materials for additive manufacturing
David Bourell et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Thermal characterization of recycled polymer for additive manufacturing applications
K. S. Boparai et al.
COMPOSITES PART B-ENGINEERING (2016)
Interfacial mechanical behavior of 3D printed ABS
Daniel P. Cole et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Simon Ford et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited
Christian Weller et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2015)
Rheological study of the reaction kinetics in a poly(ethylene terephthalate) melt
M. Haerth et al.
POLYMER DEGRADATION AND STABILITY (2015)
Effect of multiple extrusions and influence of PP contamination on the thermal characteristics of bottle grade recycled PET
Bachir Itim et al.
POLYMER DEGRADATION AND STABILITY (2015)
A new device for in-line colorimetric quantification of polypropylene degradation under multiple extrusions
Leticia Sausen Hamester et al.
POLYMER TESTING (2015)
Polymer recycling codes for distributed manufacturing with 3-D printers
Emily J. Hunt et al.
RESOURCES CONSERVATION AND RECYCLING (2015)
An experimental demonstration of effective Curved Layer Fused Filament Fabrication utilising a parallel deposition robot
Robert J. A. Allen et al.
ADDITIVE MANUFACTURING (2015)
A global sustainability perspective on 3D printing technologies
Malte Gebler et al.
ENERGY POLICY (2014)
Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
M. A. Kreiger et al.
JOURNAL OF CLEANER PRODUCTION (2014)
On reducing anisotropy in 3D printed polymers via ionizing radiation
Steven Shaffer et al.
POLYMER (2014)
The Effect of Multiple Extrusions on the Properties of Montmorillonite Filled Polypropylene
Laurens Delva et al.
POLYMERS (2014)
Effect of talc content on the degradation of re-extruded polypropylene/talc composites
K. Wang et al.
POLYMER DEGRADATION AND STABILITY (2013)
Distributed recycling of waste polymer into RepRap feedstock
Christian Baechler et al.
RAPID PROTOTYPING JOURNAL (2013)
Effect of multiple extrusions on the impact properties of polypropylene/clay nanocomposites
R. Klitkou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Recycling effects on the rheological and thermomechanical properties of polypropylene-based composites
Nadia Bahlouli et al.
MATERIALS & DESIGN (2012)
Processing degradation index (PDI) - A quantitative measure of processing stability of polypropylene
Jiri Tochacek et al.
POLYMER TESTING (2012)
Polymer chain scission, oligomer production and diffusion: A two-scale model for degradation of bioresorbable polyesters
Xiaoxiao Han et al.
ACTA BIOMATERIALIA (2011)
Thermo-mechanical Degradation and VOC Emission of Unstabilized and Stabilized Polypropylene Copolymer During Multiple Extrusions
Carlos Alberto Caceres et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2011)
Processing stability of polypropylene impact-copolymer during multiple extrusion - Effect of polymerization technology
Jiri Tochacek et al.
POLYMER DEGRADATION AND STABILITY (2011)
Mechanical Properties of Glass Bead- and Wollastonite-Filled Isotactic-Polypropylene Composites Modified With Thermoplastic Elastomers
Onur Balkan et al.
POLYMER COMPOSITES (2010)
Effect of multiple extrusion on molecular structure of polypropylene impact copolymer
Sona Hermanova et al.
POLYMER DEGRADATION AND STABILITY (2009)
Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variance
Helson M. da Costa et al.
POLYMER TESTING (2007)
Processing, morphology, and mechanical properties of liquid pool polypropylene with different molecular weights
C Stern et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2005)
Elongational viscosity of narrow molar mass distribution polystyrene
A Bach et al.
MACROMOLECULES (2003)
Effect of screw element type in degradation of polypropylene upon multiple extrusions
SV Canevarolo et al.
ADVANCES IN POLYMER TECHNOLOGY (2002)
Thermal degradation of acrylonitrile-butadiene-styrene (ABS) blends
BE Tiganis et al.
POLYMER DEGRADATION AND STABILITY (2002)
Chain scission distribution function for polypropylene degradation during multiple extrusions
SV Canevarolo
POLYMER DEGRADATION AND STABILITY (2000)
分享论文
