相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels
Mandi Alipour et al.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2020)
Effect of Porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures
Amin Pourjabari et al.
COMPUTERS & MATHEMATICS WITH APPLICATIONS (2019)
Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator
Hamed Safarpour et al.
JOURNAL OF VIBRATION AND CONTROL (2019)
Buckling and vibration characteristics of a carbon nanotube-reinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions
Farzad Ebrahimi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2019)
Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell (vol 41, pg 221, 2019)
Mostafa Habibi et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Buckling and frequency analysis of the nonlocal strain-stress gradient shell reinforced with graphene nanoplatelets
Masoud Mohammadgholiha et al.
JOURNAL OF VIBRATION AND CONTROL (2019)
Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator
Mostafa Habibi et al.
EUROPEAN PHYSICAL JOURNAL PLUS (2019)
Investigation of mechanical properties, formability, and anisotropy of dual phase Mg-7Li-1Zn
D. Rahmatabadi et al.
MATERIALS RESEARCH EXPRESS (2019)
Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory
Zanyar Esmailpoor Hajilak et al.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2019)
Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets
Mostafa Habibi et al.
COMPOSITES PART B-ENGINEERING (2019)
On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell
Farzad Ebrahimi et al.
ENGINEERING WITH COMPUTERS (2019)
A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation
Hamed Safarpour et al.
INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN (2019)
Application of Nanofluids in Thermal Performance Enhancement of Parabolic Trough Solar Collector: State-of-the-Art
Hamed Olia et al.
APPLIED SCIENCES-BASEL (2019)
Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending
Mostafa Habibi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2018)
Shaft design: A semi-analytical finite element approach
Mircea Gh. Munteanu et al.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2018)
A new finite element formulation for free vibrations of planar curved beams
Ugurcan Eroglu et al.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2018)
3D transient elasto-plastic finite element analysis of a flatted railway wheel in rolling contact
Hossein Alizadeh Otorabad et al.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2018)
Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding
M. Habibi et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory
Hamed Safarpour et al.
EUROPEAN PHYSICAL JOURNAL PLUS (2018)
Effects of Geometry and Hydraulic Characteristics of Shallow Reservoirs on Sediment Entrapment
Hamidreza Zahabi et al.
WATER (2018)
Experimental evaluation of forming limit diagram and mechanical properties of nano/ultra-fine grained aluminum strips fabricated by accumulative roll bonding
Davood Rahmatabadi et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2017)
Evaluation of deformation stability and fracture mechanism in incremental sheet forming
S. Ai et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Investigation into the effect of material properties and arrangement of each layer on the formability of bimetallic sheets
Roya Darabi et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Introducing new cracked finite elements and a method for SIF calculation of cracks
A. Kamali Yazdi et al.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2016)
Finite element modeling of smart piezo structure: considering dependence of piezoelectric coecients on electric field
Sukesha Sharma et al.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2016)
Forming limit prediction of anisotropic material subjected to normal and through thickness shear stresses using a modified M-K model
Afshin Fatemi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
A methodology for determination of extended strain-based forming limit curve considering the effects of strain path and normal stress
R. Hashemi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2015)
Finite Element Analysis of Frictional Contacts of FGM Coated Elastic Members#
Necdet Demirhan et al.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2013)
An extended Marciniak-Kuczynski model for anisotropic sheet subjected to monotonic strain paths with through-thickness shear
Philip Eyckens et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Forming limit diagrams with the existence of through-thickness normal stress
Ahmad Assempour et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
An experimental and theoretical study on the prediction of forming limit diagrams using new BBC yield criteria and M-K analysis
S. Ahmadi et al.
COMPUTATIONAL MATERIALS SCIENCE (2009)
Marciniak-Kuczynski type modelling of the effect of Through-Thickness Shear on the forming limits of sheet metal
Philip Eyckens et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Generalised forming limit diagrams showing increased forming limits with non-planar stress states
Julian M. Allwood et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Some numerical aspects of necking solution in prediction of sheet metal forming limits by strain gradient plasticity
A. R. Safikhani et al.
MATERIALS & DESIGN (2009)
The strain gradient approach for determination of forming limit stress and strain diagrams
A. R. Safikhani et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
An improved analytical approach for determination of forming limit diagrams considering the effects of yield functions
M. Ganjiani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Proposing a better forming limit diagram prediction: a comparative study
AF Avila et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Influence of transverse normal stress on sheet metal formability
LM Smith et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)
Prediction of forming limit curves using an anisotropic yield function with prestrain induced backstress
H Yao et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2002)
A general forming limit criterion for sheet metal forming
TB Stoughton
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2000)