相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effects of temperature and mechanical strain on Ni-Fe alloy CRYOPHY for magnetic shields
P. Arpaia et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)
The magnetic properties and microstructure of phosphated amorphous FeSiCr/silane soft magnetic composite
Chao Xia et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)
Synthesis of nanocrystalline equiatomic nickel-cobalt-iron alloy powders by mechanical alloying and their structural and magnetic characterization
Anuj Rathi et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)
Effect of Sintering Atmosphere on the Synthesis Process, Electrical and Mechanical Properties of NiFe2O4/Nano-TiN Ceramics
Bin Wang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Microstructure and properties of FeSiCr/PA6 composites by injection molding using FeSiCr powders by phosphating and coupling treatment
Lulu Wang et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2018)
Phase evolution, mechanical and corrosion behavior of Fe(100-x) Ni(x) alloys synthesized by powder metallurgy
Neera Singh et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)
Effect of Vacuum-Sintering Temperature on Magnetic and Mechanical Properties of TiC-TiN-Ni-Mo-C Cermets
Man Zhang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Magnetic and mechanical properties of cold-rolled permalloy
Parastoo Vandati Yekta et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2018)
Effect of sintering parameters on densification, corrosion and wear behaviour of Ni-50Fe alloy prepared by spark plasma sintering
Moraka Isaac Makena et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Mixture of fuels for solution combustion synthesis of porous Fe3O4 powders
H. Parnianfar et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)
A review of the magnetic properties, synthesis methods and applications of maghemite
H. Shokrollahi
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)
Tuning the phase stability and magnetic properties of laser additively processed Fe-30at% Ni soft magnetic alloys
C. V. Mikler et al.
MATERIALS LETTERS (2017)
Structural and Mechanical Behaviour of Fe-30Ni Alloy Produced by a Powder Metallurgy Route
Neera Singh et al.
TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY (2017)
Solution Combustion Synthesis of Nanoscale Materials
Arvind Varma et al.
CHEMICAL REVIEWS (2016)
Effect of starting powder particle size and heating rate on spark plasma sintering of Fe-Ni alloys
M. B. Shongwe et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Structural and magnetic properties of nanocrystalline Fe-Co-Ni alloy processed by mechanical alloying
Hossein Raanaei et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)
Severe reduction of Ni-Zn ferrites during consolidation by Spark Plasma Sintering (SPS)
Raul Valenzuela et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)
Effect of Fe3P addition on magnetic properties and microstructure of injection molded iron
Jidong Ma et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)
Growth mechanism and magnetism in carbothermal synthesized Fe3O4 nanoparticles from solution combustion precursors
Xuanli Wang et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)
The Crystal Structure and Magnetic Properties οf Selected fcc FeNi and Fe40Ni40B20Alloys
M. Kądziołka-Gaweł et al.
ACTA PHYSICA POLONICA A (2016)
Influence of Temperature on Microstructure and Mechanical Properties of Ni-40Fe-10Co Alloy Consolidated by Spark Plasma Sintering
Isaac Moraka Makena et al.
INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2017) (2016)
Effect of sintering temperature on the microstructure and mechanical properties of Fe-30%Ni alloys produced by spark plasma sintering
Mxolisi Brendon Shongwe et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Ultrafine grained high density manganese zinc ferrite produced using polyol process assisted by Spark Plasma Sintering
T. Gaudisson et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2015)
Advanced soft magnetic composite materials for AC applications with reduced iron losses
L. Frayman et al.
POWDER METALLURGY (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Mechanical and microstructural investigations of tungsten and doped tungsten materials produced via powder injection molding
Steffen Antusch et al.
NUCLEAR MATERIALS AND ENERGY (2015)
Effect of ball milling on the rheology and particle characteristics of Fe-50%Ni powder injection molding feedstock
Jidong Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Composition dependence of the microstructure and soft magnetic properties of Fe-based amorphous/nanocrystalline alloys: A review study
H. R. Lashgari et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2014)
Review of Factors that Affect Shrinkage of Molded Part in Injection Molding
Daniele Annicchiarico et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Microstructure and magnetic properties of Fe-79%Ni-4%Mo alloy fabricated by metal injection molding
Jidong Ma et al.
POWDER TECHNOLOGY (2014)
Solution combustion synthesis of nanocrystalline Fe-50%Ni alloy powder
Ye Liu et al.
POWDER TECHNOLOGY (2014)
Sensor Applications of Soft Magnetic Materials Based on Magneto-Impedance, Magneto-Elastic Resonance and Magneto-Electricity
Alfredo Garcia-Arribas et al.
SENSORS (2014)
Validation of the Anhysteretic Magnetization Model for Soft Magnetic Materials with Perpendicular Anisotropy
Roman Szewczyk
MATERIALS (2014)
Improvement of magnetic properties of nanostructured Ni79Fe16Mo5 alloyed powders by a suitable heat treatment
L. Karimi et al.
ADVANCED POWDER TECHNOLOGY (2013)
Structural evolution and magnetic properties of nanocrystalline 50 Permalloy powders prepared by mechanical alloying
Kh Gheisari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Microstructure and magnetic properties of Fe-50%Ni alloy fabricated by powder injection molding
Jidong Ma et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2013)
Structural and magnetic properties of nanocrystalline nickel-rich Fe-Ni alloy powders prepared via hydrazine reduction
Zhichao Xu et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2013)
Structural and magnetic properties of γ-Fe2O3 nanostructured compacts processed by spark plasma sintering
P. Saravanan et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2013)
Microstructure and magnetic properties of soft magnetic powder cores of amorphous and nanocrystalline alloys
Yapi Liu et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2013)
Magnetic properties of in-situ synthesized FeNi3 by selective laser melting Fe-80%Ni powders
Baicheng Zhang et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2013)
Thermal stability and mechanical properties of nanocrystalline Fe-Ni-Zr alloys prepared by mechanical alloying
Hasan Kotan et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Magnetic properties of Fe-50%Ni alloy fabricated by metal injection molding
Jidong Ma et al.
MATERIALS & DESIGN (2013)
Preparation of high performance sintered soft magnetic alloy by metal injection molding
Jidong Ma et al.
MATERIALS CHEMISTRY AND PHYSICS (2013)
Effects of Particle Sizes on Sintering Behavior of 316L Stainless Steel Powder
Dong Yong Park et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Application of metal injection moulding to soft magnetic materials
H. Miura et al.
POWDER METALLURGY (2013)
Direct measurement of local magnetic moments at grain boundaries in iron
Seiichiro Ii et al.
SCRIPTA MATERIALIA (2013)
Influence of surfactant addition on rheological behaviors of injection-molded ultrafine 98W-1Ni-1Fe suspension
Jing-lian Fan et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Development of Soft Magnetic Materials Prepared by Metal Injection Molding
Shang Feng et al.
NANOTECHNOLOGY AND PRECISION ENGINEERING, PTS 1 AND 2 (2013)
Development of P/M Fe-P soft magnetic materials
S. K. Chaurasia et al.
BULLETIN OF MATERIALS SCIENCE (2012)
Studies of magnetic properties of permalloy (Fe-30%Ni) prepared by SLM technology
Baicheng Zhang et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2012)
Tailoring Selective Laser Melting Process Parameters for NiTi Implants
Therese Bormann et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Magnetic material selection using multiple attribute decision making approach
Aditya Chauhan et al.
MATERIALS & DESIGN (2012)
Effect of annealing on microstructure, grain growth, and hardness of nanocrystalline Fe-Ni alloys prepared by mechanical alloying
H. Kotan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of boron additives on the structure and properties of soft magnetic composites produced from nickel-clad iron powders
N. V. Boshitskaya et al.
POWDER METALLURGY AND METAL CERAMICS (2012)
Gas phase synthesis of Ni3Fe nanoparticles by magnesium reduction of metal chlorides
Fereshteh Mirhoseini et al.
POWDER TECHNOLOGY (2012)
Modeling the Densification of 316L Stainless Steels
Jose Adilson de Castro et al.
ADVANCED POWDER TECHNOLOGY VIII, PTS 1 AND 2 (2012)
Magnetic Materials and Devices for the 21st Century: Stronger, Lighter, and More Energy Efficient
Oliver Gutfleisch et al.
ADVANCED MATERIALS (2011)
The effect of heat treatment on the structure and magnetic properties of mechanically alloyed Fe-45%Ni nanostructured powders
Kh. Gheisari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Fe-B-P-Cu nanocrystalline soft magnetic alloys with high Bs
Akiri Urata et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Influence of milling time on the structural, microstructural and magnetic properties of mechanically alloyed Ni58Fe12Zr10Hf10B10 nanostructured/amorphous powders
R. Besmel et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2011)
Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering Process
Zuhair A. Munir et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
Surface Modification Mechanism of Stearic Acid to Zirconia Powders Induced by Ball Milling for Water-Based Injection Molding
Wei Liu et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
Micro powder injection moulding of alumina micro-channel part
Junhu Meng et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
The Effects of Chemical Composition on Soft Magnetic Materials Behaviour
R. Bidulsky et al.
ACTA PHYSICA POLONICA A (2010)
Synthesis of submicron sized Fe20Ni80 particles and their magnetic properties
Daisuke Kodama et al.
JOURNAL OF APPLIED PHYSICS (2010)
Effect of Boron Additions on Sintering and Densification of a Ferritic Stainless Steel
J. A. Cabral Miramontes et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2010)
Effect of chromium on the mechanical properties of powder-processed Fe-0.45 wt.% P alloys
Shefali Trivedi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Effect of Laser Parameters on Sintered Powder Morphology
Byeong-Don Joo et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2010)
Ceramic composite components with gradient porosity by powder injection moulding
S. X. Zhang et al.
MATERIALS & DESIGN (2010)
Effect of Hot-Isostatic-Pressing Parameters on the Microstructure and Properties of Powder Ti-6Al-4V Hot-Isostatically-Pressed Samples
K. Zhang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Characteristics of fine size Fe-Ni alloy powders directly prepared by spray pyrolysis
H. C. Jang et al.
METALS AND MATERIALS INTERNATIONAL (2010)
Influence of powder particle size distribution on rheological properties of 316 L powder injection moulding feedstocks
M. E. Sotomayor et al.
POWDER TECHNOLOGY (2010)
Kinetic model for isothermal sintering of porcelain stoneware body in presence of nepheline syenite
A. Salem et al.
THERMOCHIMICA ACTA (2010)
The effect of milling speed on the structural properties of mechanically alloyed Fe-45%Ni powders
Kh. Gheisari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Nanocrystalline spherical iron-nickel (Fe-Ni) alloy particles prepared by ultrasonic spray pyrolysis and hydrogen reduction (USP-HR)
Sebahattin Gurmen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Calculation of eddy-current loss in multilayer magnetic films considering displacement current
Di Yao et al.
JOURNAL OF APPLIED PHYSICS (2009)
Fabrication of bronze components by metal injection moulding using powders with different particle characteristics
Jose M. Contreras et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
The magnetic and structural properties of the most important alloys of iron produced by mechanical alloying
H. Shokrollahi
MATERIALS & DESIGN (2009)
Consolidation/synthesis of materials by electric current activated/assisted sintering
Roberto Orru et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)
Synthesis of nano-crystalline NiO-YSZ by microwave-assisted combustion synthesis
H. Mohebbi et al.
POWDER TECHNOLOGY (2009)
Microwave assisted combustion synthesis of nanocrystalline yttria and its powder characteristics
R. V. Mangalaraja et al.
POWDER TECHNOLOGY (2009)
X-ray diffraction, microstructure, Mossbauer and magnetization studies of nanostructured Fe50Ni50 alloy prepared by mechanical alloying
A. Guittoum et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2008)
Preparation of nanocrystalline Fe-Ni powders by mechanical alloying used in soft magnetic composites
R. Koohkan et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2008)
Ball milling induced abnormal crystallization behavior of an amorphous Fe78Si9B13 alloy
Changpin Zhang et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2008)
Curie temperatures of fcc and bcc nickel and permalloy: Supercell and Green's function methods
P. Yu et al.
PHYSICAL REVIEW B (2008)
Low-temperature synthesis of nanocrystalline spinel by mechanical milling and annealing of Al-Ni-Fe decagonal quasicrystals
T. P. Yadav et al.
PHILOSOPHICAL MAGAZINE (2008)
Different annealing treatments for improvement of magnetic and electrical properties of soft magnetic composites
H. Shokrollahi et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2007)
NiFeCuMo magnetic powders obtained by controlled mechanical alloying and annealing
F. Popa et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2007)
The influence of mechanical milling on structure and soft magnetic properties of NiFe and NiFeMo alloys
Denisa Oleksakova et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2007)
Influence of additives on the magnetic properties, microstructure and densification of Mn-Zn soft ferrites
H. Shokrollahi et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2007)
Soft magnetic composite materials (SMCs)
H. Shokrollahi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Mechanical alloying of Ni3Fe in the presence of Ni3Fe nanocrystalline germs
Z. Sparchez et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Structural nanocrystalline materials: an overview
Carl C. Koch
JOURNAL OF MATERIALS SCIENCE (2007)
The magnetic properties of powdered and compacted microcrystalline permalloy
P. Kollar et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2007)
Reducing the losses in sintered permalloy by addition of ferrite
M. Plaza et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2007)
Influence of process parameters and alloy composition on structural, magnetic and electrical characteristics of Ni-Fe permalloys
Kiran Gupta et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
State of the art: Applications of mechanically alloyed nanomaterials - A review
Vikas Chawla et al.
MATERIALS AND MANUFACTURING PROCESSES (2007)
Study of Fe-Ni alloys produced by mechanical alloying
J. F. Valderruten et al.
PHYSICA B-CONDENSED MATTER (2006)
Powder injection molding of Fe-Ni soft magnetic alloys
Duan Bohua et al.
RARE METALS (2006)
The effect of compaction parameters and particle size on magnetic properties of iron-based alloys used in soft magnetic composites
H. Shokrollahi et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2006)
Soft magnetic properties of NiFe compacted powder alloys
D. Oleksakova et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2006)
Upgrade Fe-50%Ni alloys for open-loop DC current sensor: Design and alloy-potential characteristics
Thierry Waeckerle et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2006)
Sintering of nano-sized WC-Co powders produced by a gas reduction-carburization process
Gwan-Hyoung Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2006)
Electric and magnetic properties of Fe-Ni powders-polymeric matrix composites
J. A. Verduzco et al.
MATERIALS LETTERS (2006)
Structure, magnetic and Mossbauer studies of mechanically alloyed Fe-20 wt.% Ni powders
R. Hamzaoui et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2006)
Mechanical properties of nanocrystalline materials
MA Meyers et al.
PROGRESS IN MATERIALS SCIENCE (2006)
Spark plasma sintering of a nanocrystalline Al-Cu-Mg-Fe-Ni-Sc alloy
A Zúñiga et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Grain boundary engineering by magnetic field application
T Watanabe et al.
SCRIPTA MATERIALIA (2006)
Improvements in sintered density and dimensional stability of powder injection-molded 316L compacts by adjusting the alloying compositions
GJ Shu et al.
ACTA MATERIALIA (2006)
Grain boundary and grain structure control through application of a high magnetic field
DA Molodov et al.
SCRIPTA MATERIALIA (2006)
Preparation of nanocrystalline Fe-Si-Ni soft magnetic powders by mechanical alloying
HRM Hosseini et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2005)
Analysis of the rheological behavior and stability of 316L stainless steel-TiC powder injection molding feedstock
M Khakbiz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Soft magnetic FeCo alloys: alloy development, processing, and properties
RS Sundar et al.
INTERNATIONAL MATERIALS REVIEWS (2005)
Analysis of wasp-waist hysteresis loops
LH Bennett et al.
JOURNAL OF APPLIED PHYSICS (2005)
Nanocrystalline structure and particle size effect on microwave permeability of FeNi powders prepared by mechanical alloying
PH Zhou et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2005)
Soft magnetic FeNi alloys for DC current sensors with high accuracy
T Waeckerlé et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2005)
Magnetic and structural properties of the Supermalloy powders produced by mechanical alloying and annealing
O Isnard et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2005)
Nickel-iron alloys with special soft magnetic properties for specific applications
B Gehrmann
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2005)
Mixing and characterisation of 316L stainless steel feedstock for micro powder injection molding
L Liu et al.
MATERIALS CHARACTERIZATION (2005)
Structural properties of Fe50Co50 nanostructured powder prepared by mechanical alloying
H Moumeni et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Magnetic and frequency properties for nanocrystalline Fe-Ni alloys prepared by high-energy milling method
YS Liu et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2005)
Structure and magnetic properties study of iron-based thermally sprayed alloys
NE Fenineche et al.
MATERIALS LETTERS (2004)
Effects of processing upon the properties of soft magnetic composites for low loss applications
I Gilbert et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Rheological properties of feedstocks prepared with steatite powder and polyethylene-based thermoplastic binders
C Karatas et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Milling conditions effect on structure and magnetic properties of mechanically alloyed Fe-10% Ni and Fe-20% Ni alloys
R Hamzaoui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Effect of nickel content and milling parameters on martensitic transformation of Fe-Ni during mechanical alloying
LH Zhu et al.
SCRIPTA MATERIALIA (2004)
Magnetic hysteresis loop tuning in antiferromagnetically coupled bilayer structures
A Berger et al.
APPLIED PHYSICS LETTERS (2004)
Friction mode and shock mode effect on magnetic properties of mechanically alloyed Fe-based nanocrystalline materials
R Hamzaoui et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Application of magnetic field to the control of grain boundary segregation in iron
S Tsurekawa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Synthesis of the supermalloy powders by mechanical alloying
I Chicinas et al.
JOURNAL OF MATERIALS SCIENCE (2004)
The effect of milling parameters on the synthesis of Ni3Al intermetallic compound by mechanical alloying
MH Enayati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Injection moulding (review)
VM Kryachek
POWDER METALLURGY AND METAL CERAMICS (2004)
Synthesis and characterization of high-energy ball milled Ni-15%Fe-5%Mo
YP Shen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Tensile behavior of nanocrystalline Ni-Fe alloy
XY Qin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Recent advances and future directions in magnetic materials
DC Jiles
ACTA MATERIALIA (2003)
Structure and magnetic properties of nanocrystalline mechanically alloyed Fe-10% Ni and Fe-20% Ni
R Hamzaoui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Crystallographic and magnetic study of the nanocrystalline Ni3Fe intermetallic compound formation by mechanical alloying and annealing
V Pop et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2003)
Effects of laser sintering processing parameters on the microstructure and densification of iron powder
A Simchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Effect of mixing on the rheology and particle characteristics of tungsten-based powder injection molding feedstock
P Suri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Local atomic order in nanocrystalline Fe-based alloys obtained by mechanical alloying
E Jartych
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2003)
Effect of milling speed on an Fe-C-Mn system alloy prepared by mechanical alloying
NT Rochman et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
The rheology of metal injection molding
BY Huang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Sintering of commercially pure titanium powder with a Nd:YAG laser source
P Fischer et al.
ACTA MATERIALIA (2003)
Synthesis and magnetic properties of Ni3Fe intermetallic compound obtained by mechanical alloying
I Chicinas et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2003)
An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel
AJ Pinkerton et al.
APPLIED SURFACE SCIENCE (2003)
Effects of phosphorus addition on the magnetic properties of sintered Fe-50 wt.% Ni alloys
MS Chuang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2003)
Sintered soft magnetic materials. Properties and applications
JA Bas et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2003)
On the development of direct metal laser sintering for rapid tooling
A Simchi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Spark plasma sintering as advanced PM sintering method
V Mamedov
POWDER METALLURGY (2002)
Spark plasma sintering of alumina
ZJ Shen et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2002)
Magnetic properties of Ni3Fe intermetallic compound obtained by mechanical alloying
I Chicinas et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2002)
Study on phase transformation of Fe-Ni powders during mechanical alloying
LH Zhu et al.
JOURNAL OF MATERIALS SCIENCE (2001)
A comparison of different models for mechanical alloying
JR Harris et al.
ACTA MATERIALIA (2001)
Mechanically alloyed low-nickel austenite Fe-Ni phase: evidence of single-phase paramagnetic state
SD Kaloshkin et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2001)
Phase transformations in Fe-Ni system at mechanical alloying and consequent annealing of elemental powder mixtures
SD Kaloshkin et al.
PHYSICA B (2001)
Order-disorder studies and magnetic properties of mechanically alloyed nanocrystalline Ni3Fe allay
CN Chinnasamy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
The science and technology of mechanical alloying
C Suryanarayana et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
A mathematical analysis of milling mechanics in a planetary ball mill
PP Chattopadhyay et al.
MATERIALS CHEMISTRY AND PHYSICS (2001)
Fundamental aspects of hot isostatic pressing: An overview
HV Atkinson et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)
Formation of nanocrystalline Fe-Co powders produced by mechanical alloying
YD Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Investigation of core loss in PM micro-motor made using MIM technology
HC Chau et al.
IEEE TRANSACTIONS ON MAGNETICS (2000)
Magnetic properties of materials
HH Stadelmaier
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Effect of powder treatment on injection moulded zirconia ceramics
M Trunec et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)
50.50 FeNi permalloy with Ti and Cr additions for improved hardness and corrosion resistance
L Coutu et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2000)
Structure and soft magnetic properties of Finemet alloys
MM Raja et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2000)
X-ray diffraction, magnetization and Mossbauer studies of nanocrystalline Fe-Ni alloys prepared by low- and high-energy ball milling
E Jartych et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2000)
High temperature soft magnetic materials: FeCo alloys and composites
RH Yu et al.
IEEE TRANSACTIONS ON MAGNETICS (2000)
Effects of multi-segment structure on core losses in MnZn ferrites at high frequencies
J Zhu et al.
IEEE TRANSACTIONS ON MAGNETICS (2000)