Electrical, Thermal, and Mechanical Properties of Cu/Ti3AlC2 Functional Gradient Materials Prepared by Low-temperature Spark Plasma Sintering

Cu/Ti3AlC2 composite and functional-gradient materials with excellent electrical conductivity and thermal conductivity as well as good flexural properties were prepared by low-temperature spark plasma sintering of Cu and Ti3AlC2 powder mixtures. The phase compositions of the materials were analyzed by X-ray diffraction, and their microstructure was characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy. Further, the electrical conductivity, thermal conductivity, and flexural properties of the materials were tested. Results show that, for the composite materials, the resistivity rises from 0.75 x 10(-7) omega center dot m only to 1.32 x 10(-7) omega center dot m and the thermal diffusivity reduces from 82.5 mm(2)/s simply to 39.8 mm(2)/s, while the flexural strength improves from 412.9 MPa to 471.3 MPa, as the content of Ti3AlC2 is increased from 5wt% to 25wt%. Additionally, the functional-gradient materials sintered without interface between the layers exhibit good designability, and their overall electrical conductivity, thermal conductivity, and flexural strength are all higher than those of the corresponding uniform composite material.