相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。AA7050 Al Alloy Hot-Forging Process for Improved Fracture Toughness Properties
Giuliano Angella et al.
METALS (2019)
Recent advances in the development of aerospace materials
Xuesong Zhang et al.
PROGRESS IN AEROSPACE SCIENCES (2018)
Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review
Ali Abd El-Aty et al.
JOURNAL OF ADVANCED RESEARCH (2018)
THE EFFECT OF PLUNGE DEPTH ON THE STRENGTH PROPERTIES OF FRICTION WELDED JOINTS USING THE RFSSW METHOD
Rafal Kluz et al.
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2018)
Laser Beam Welding of IN792 DS Superalloy
Giuseppe Barbieri et al.
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS (2018)
THE EFFECT OF RFSSW PARAMETERS ON THE LOAD BEARING CAPACITY OF ALUMINUM 7075-T6 SHEET METAL JOINTS
Rafal Kluz et al.
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2018)
Mechanical Characterization of a Nano-ODS Steel Prepared by Low-Energy Mechanical Alloying
Massimo De Sanctis et al.
METALS (2017)
Reduced Graphene Oxide Reinforced 7075 Al Matrix Composites: Powder Synthesis and Mechanical Properties
Youhong Sun et al.
METALS (2017)
Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
V. A. Popovich et al.
MATERIALS & DESIGN (2017)
Influence of Mg and Li content on the microstructure evolution of Al-Cu-Li alloys during long-term ageing
A. Deschamps et al.
ACTA MATERIALIA (2017)
Electron Beam Welding of IN792 DS: Effects of Pass Speed and PWHT on Microstructure and Hardness
Giuliano Angella et al.
MATERIALS (2017)
Experimental and numerical investigation of aluminium lap joints made by RFSSW
Piotr Lacki et al.
MECCANICA (2016)
Evolution of the Annealing Twin Density during δ-Supersolvus Grain Growth in the Nickel-Based Superalloy Inconel™ 718
Yuan Jin et al.
METALS (2016)
Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al-Cu-Li alloy AA2195
B. I. Rodgers et al.
ACTA MATERIALIA (2016)
Combined cycle fatigue of 7075 aluminum alloy - Fracture surface characterization and short crack propagation
S. E. Stanzl-Tschegg et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies
Fabian Geiger et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
Markus Ramsperger et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Welding of IN792 DS superalloy by electron beam
R. Montanari et al.
SURFACE AND INTERFACE ANALYSIS (2016)
Transmission Electron Microscopy of a CMSX-4 Ni-Base Superalloy Produced by Selective Electron Beam Melting
Alireza B. Parsa et al.
METALS (2016)
Evaluation of Structural Stability of Materials through Mechanical Spectroscopy: Four Case Studies
Girolamo Costanza et al.
METALS (2016)
Microstructure, texture and hardness of Al-Cu-Li alloy sheet during hot gas forming with integrated heat treatment
Xiaobo Fan et al.
MATERIALS & DESIGN (2016)
The Influence of Cutting Heat on the Surface Integrity during Machining of Titanium Alloy Ti6Al4V
Sandip Patil et al.
44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44 (2016)
Experimental investigation of hardness of FSW and TIG joints of Aluminium alloys of AA7075 and AA6061
Chetan Patil et al.
FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY (2016)
State of the Art in Beta Titanium Alloys for Airframe Applications
James D. Cotton et al.
JOM (2015)
Precipitation behavior and tensile properties of new high strength beta titanium alloy Ti-1300
Jinwen Lu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effect of age-forming on microstructure, mechanical and corrosion properties of a novel Al-Li alloy
H. Y. Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Atomic structure and growth mechanism of T1 precipitate in Al-Cu-Li-Mg-Ag alloy
Sung Jin Kang et al.
SCRIPTA MATERIALIA (2015)
Recent advances on the development of magnesium alloys for biodegradable implants
Yongjun Chen et al.
ACTA BIOMATERIALIA (2014)
Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al-Cu-Li alloy
Thomas Dorin et al.
ACTA MATERIALIA (2014)
The effect of Mn and Zr dispersoid-forming additions on recrystallization resistance in Al-Cu-Li AA2198 sheet
D. Tsivoulas et al.
ACTA MATERIALIA (2014)
Microstructural evolution during ageing of Al-Cu-Li-x alloys
Vicente Araullo-Peters et al.
ACTA MATERIALIA (2014)
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
Qingbo Jia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure
Harald Ernst Helmer et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Recent developments in advanced aircraft aluminium alloys
Tolga Dursun et al.
MATERIALS & DESIGN (2014)
Ageing response of a Al-Cu-Li 2198 alloy
Sai-fei Zhang et al.
MATERIALS & DESIGN (2014)
Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behavior
Bo Song et al.
MATERIALS & DESIGN (2014)
The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array
Mumin Tutar et al.
MATERIALS & DESIGN (2014)
Strengthening mechanisms of T1 precipitates and their influence on the plasticity of an Al-Cu-Li alloy
Thomas Dorin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The influence of Cu/Li ratio on precipitation in Al-Cu-Li-x alloys
B. Decreus et al.
ACTA MATERIALIA (2013)
The influence of precipitation on plastic deformation of Al-Cu-Li alloys
A. Deschamps et al.
ACTA MATERIALIA (2013)
Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
Lore Thijs et al.
ACTA MATERIALIA (2013)
Microstructure evolution and density behavior of CP Ti parts elaborated by Self-developed vacuum selective laser melting system
Baicheng Zhang et al.
APPLIED SURFACE SCIENCE (2013)
Joining by plastic deformation
Ken-ichiro Mori et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Microstructure and tensile behavior of hybrid nano-micro SiC reinforced iron matrix composites produced by selective laser melting
Bo Song et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
The Use of β Titanium Alloys in the Aerospace Industry
R. R. Boyer et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
The influence of refill FSSW parameters on the microstructure and shear strength of 5042 aluminium welds
M. D. Tier et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Microstructure and Magnetic Properties of Fe-Ni Alloy Fabricated by Selective Laser Melting Fe/Ni Mixed Powders
Baicheng Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)
Materials selection in design of structures and engines of supersonic aircrafts: A review
Zainul Huda et al.
MATERIALS & DESIGN (2013)
Microstructures and properties of 2099 Al-Li alloy
Yi Lin et al.
MATERIALS CHARACTERIZATION (2013)
Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets
Sie Chin Tjong
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2013)
Structure and mechanical properties of TiZr binary alloy after Al addition
X. J. Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructural observation and tensile properties of ODS-304 austenitic steel
Man Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Causes and control of welding cracks in electron-beam-welded superalloy GH4169 joints
Guo-qing Chen et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Ultrastrong Mg Alloy via Nano-spaced Stacking Faults
W. W. Jian et al.
MATERIALS RESEARCH LETTERS (2013)
Magnesium casting technology for structural applications
Alan A. Luo
JOURNAL OF MAGNESIUM AND ALLOYS (2013)
Experimental Investigation on Refill Friction Stir Spot Welding Process of Aluminum Alloys
HongGang Yang et al.
ADVANCED RESEARCH ON MECHANICAL ENGINEERING, INDUSTRY AND MANUFACTURING ENGINEERING III (2013)
The effect of Zn concentration on the corrosion behavior of Mg-xZn alloys
Yingwei Song et al.
CORROSION SCIENCE (2012)
Effect of Al alloys on selective laser melting behaviour and microstructure of in situ formed particle reinforced composites
S. Dadbakhsh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Microstructural anisotropy effect on the mechanical properties of a 14Cr ODS steel
Marta Serrano et al.
JOURNAL OF NUCLEAR MATERIALS (2012)
Structure and mechanical properties of Ti-6Al-4V alloy after zirconium addition
R. Jing et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
The Evolution of Al-Li Base Products for Aerospace and Space Applications
Roberto J. Rioja et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
TEM diffraction study of Al2CuMg (S′/S) precipitation in an Al-Li-Cu-Mg(Zr) alloy
H. Djaaboube et al.
PHILOSOPHICAL MAGAZINE (2012)
Deformation twinning in nanocrystalline materials
Y. T. Zhu et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Relation between the microstructure and microchemistry in Ni-based superalloy
S. Kaciulis et al.
SURFACE AND INTERFACE ANALYSIS (2012)
Machinability and surface integrity of RR1000 nickel based superalloy
S. L. Soo et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Solidification Behavior and Segregation of Re-containing Cast Ni-base Superalloy with Different Cr Content
Xiurong Gizan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2011)
Analytical characterization of secondary phases and void distributions in an ultrafine-grained ODS Fe-14Cr model alloy
V. de Castro et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Anisotropy in tensile and ductile-brittle transition behavior of ODS ferritic steels
R. Kasada et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Modelling of the Precipitated Phases and Properties of Al-Zn-Mg-Cu Alloys
Jingjing Yu et al.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2011)
Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy
Zhaohua Zhang et al.
MATERIALS & DESIGN (2011)
Titanium alloy production technology, market prospects and industry development
Cui Chunxiang et al.
MATERIALS & DESIGN (2011)
Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
L. E. Murr et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Deformation twinning in a nanocrystalline hcp Mg alloy
X. L. Wu et al.
SCRIPTA MATERIALIA (2011)
Microstructure evolution and deformation features of single crystal nickel-based superalloy containing 4.2% Re during creep
Tian Su-gui et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)
Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace application
M. M. Okasha et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Effect of trace additions of Sn on microstructure and mechanical properties of Al-Cu-Mg alloys
Sanjib Banerjee et al.
MATERIALS & DESIGN (2010)
Spark plasma sintered multi-wall carbon nanotube reinforced aluminum matrix composites
Jin-zhi Liao et al.
MATERIALS & DESIGN (2010)
Microstructure development of different orientated nickel-base single crystal superalloy in directional solidification
Xinbao Zhao et al.
MATERIALS CHARACTERIZATION (2010)
Effect of Zr addition on the mechanical properties of as-extruded Mg-Zn-Ca-Zr alloys
T. Homma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Microchemical characterisation of carbon-metal interface in Ti6Al4V-SiCf composites
S. Kaciulis et al.
SURFACE AND INTERFACE ANALYSIS (2010)
An investigation on corrosion behaviour of pressure infiltrated Al-Mg alloy/SiCp composites
Sennur Candan
CORROSION SCIENCE (2009)
Delamination cracking in advanced aluminum-lithium alloys - Experimental and computational studies
S. Kalyanam et al.
ENGINEERING FRACTURE MECHANICS (2009)
Statistical analysis of recast formation in laser drilled acute blind holes in CMSX-4 nickel superalloy
Stephen Leigh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Surface integrity of dry machined titanium alloys
A. Ginting et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Corrosion behaviors of Mg and its alloys with different Al contents in a modified simulated body fluid
Zhaohui Wen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
CEA developments of new ferritic ODS alloys for nuclear applications
Y. de Carlan et al.
JOURNAL OF NUCLEAR MATERIALS (2009)
Single crystal PWA 1483 superalloy: Dislocation rearrangement and damping phenomena
P. Deodati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
High temperature damping behaviour of Ti6Al4V-SiCf composite
P. Deodati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Low temperature anelasticity in Ti6Al4V alloy and Ti6Al4V-SiCf composite
S. Amadori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Improving both strength and ductility of a Mg alloy through a large number of ECAP passes
Aibin Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
K. Lu et al.
SCIENCE (2009)
Comparison of fatigue behaviour between resistance spot and friction stir spot welded aluminium alloy sheets
Y. Uematsu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Lattice expansion of Ti-6Al-4V by nitrogen and oxygen absorption
R. Montanari et al.
MATERIALS CHARACTERIZATION (2008)
Role of Re and Co on microstructures and γ′ coarsening in single crystal superalloys
W. Z. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
An experimental investigation of deep-hole microdrilling capability for a nickel-based superalloy
M. Imran et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Effect of anodic oxidation on fatigue performance of 7075-T6 alloy
E. Cirik et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Composite of Ti6Al4V and SiC fibres: evolution of fibre-matrix interface during heat treatments
Riccardo Donnini et al.
SURFACE AND INTERFACE ANALYSIS (2008)
Influence of EDM process parameters in deep hole drilling of Inconel 718
P. Kuppan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Effect of hot plastic deformation on microstructure and mechanical property of Mg-Mn-Ce magnesium alloy
Jian Wei-Wei et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2007)
Mechanical and microstructural behaviour of Y2O3ODS EUROFER 97
V. de Castro et al.
JOURNAL OF NUCLEAR MATERIALS (2007)
Determination of fatigue related discontinuity state of 7000 series of aerospace aluminum alloys
Ali Merati et al.
ENGINEERING FAILURE ANALYSIS (2007)
Effect of Y concentration on the microstructure and mechanical properties of as-cast Mg-Zn-Y-Zr alloys
D. K. Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Effect of C coating on the interfacial microstructure and properties of SiC fiber-reinforced Ti matrix composites
Y. C. Fu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Fabrication of,bulk nanocrystalline Fe-C alloy by spark plasma sintering of mechanically milled powder
HW Zhang et al.
SCRIPTA MATERIALIA (2005)
Investigations on belt polishing of heat-resistant titanium alloys
DA Axinte et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
The effect of machining on surface integrity of titanium alloy Ti-6% Al-4% V
CH Che-Haron et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Influence of reinforcement proportion and matrix composition on pitting corrosion behaviour of cast aluminium matrix composites (A3xx.x/SiCp)
A Pardo et al.
CORROSION SCIENCE (2005)
A study of the heat-affected zone (HAZ) of an Inconel 718 sheet welded with electron-beam welding (EBW)
CA Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Current wrought magnesium alloys: Strengths and weaknesses
CJ Bettles et al.
JOM (2005)
Effects of Ru and Re additions on the high temperature flow stresses of Ni-base single crystal superalloys
AC Yeh et al.
SCRIPTA MATERIALIA (2005)
Investigation of electron-beam welding in wrought Inconel 706 - experimental and numerical analysis
P Ferro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Investigation of the solidification behavior of a new Ru-containing cast Ni-base superalloy with high W content
L Zheng et al.
SCRIPTA MATERIALIA (2004)
Compositional design considerations for microsegregation in single crystal superalloy systems
RM Kearsey et al.
INTERMETALLICS (2004)
Nickel based superalloy welding practices for industrial gas turbine applications
MB Henderson et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)
Microstructural study of weld fusion zone of TIG welded IN 738LC nickel-based superalloy
OA Ojo et al.
SCRIPTA MATERIALIA (2004)
Extracting inter-diffusion parameters of TiC from AES depth profiles
HC Swart et al.
APPLIED SURFACE SCIENCE (2003)
Use of high temperature X-ray diffractometry to study phase transitions and thermal expansion properties in Ti-6AI-4V
R Pederson et al.
MATERIALS SCIENCE AND TECHNOLOGY (2003)
Perspective of ODS alloys application in nuclear environments
S Ukai et al.
JOURNAL OF NUCLEAR MATERIALS (2002)
Ferritic/martensitic steels - overview of recent results
RL Klueh et al.
JOURNAL OF NUCLEAR MATERIALS (2002)
Residual stresses in a welded superalloy disc: Characterization using synchrotron diffraction and numerical process modeling
MVRS Jensen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Microstructural evolution during grain boundary engineering of low to medium stacking fault energy fcc materials
M Kumar et al.
ACTA MATERIALIA (2002)
Synchrotron X-ray diffraction study of the phase transformations in titanium alloys
S Malinov et al.
MATERIALS CHARACTERIZATION (2002)
Thermal expansion anisotropy in a Ti-6Al-4V/SiC composite
H Choo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
The precipitation of topologically close-packed phases in rhenium-containing superalloys
CMF Rae et al.
ACTA MATERIALIA (2001)
Novel hexagonal structure and ultrahigh strength of magnesium solid solution in the Mg-Zn-Y system
A Inoue et al.
JOURNAL OF MATERIALS RESEARCH (2001)
Magnesium - Properties - applications - potential
BL Mordike et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Metal-matrix composites for space applications
S Rawal
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2001)
Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation
A Yamashita et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
The effect of processing and microstructure development on the slip and fracture behavior of the 2.1 wt pct Li AF/C-489 and 1.8 wt pct Li AF/C-458 Al-Li-Cu-X alloys
AA Csontos et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)
分享论文
