相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Osteoconductive Lattice Microarchitecture for Optimized Bone Regeneration
Michael De Wild et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2019)
A novel 3D printed cage with microporous structure and in vivo fusion function
Peng Li et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2019)
Non-Auxetic Mechanical Metamaterials
Christa P. de Jonge et al.
MATERIALS (2019)
Mechanical and Biological Characterization of 3D Printed Lattices
Paul Egan et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2019)
Permeability versus Design in TPMS Scaffolds
A. P. G. Castro et al.
MATERIALS (2019)
Pore functionally graded Ti6Al4V scaffolds for bone tissue engineering application
Su Wang et al.
MATERIALS & DESIGN (2019)
A review on the use of computational methods to characterize, design, and optimize tissue engineering scaffolds, with a potential in 3D printing fabrication
Shuo Zhang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
Mechanics of Three-Dimensional Printed Lattices for Biomedical Devices
Paul F. Egan et al.
JOURNAL OF MECHANICAL DESIGN (2019)
Biomimetic 3D-printed scaffolds for spinal cord injury repair
Jacob Koffler et al.
NATURE MEDICINE (2019)
Engineering Precision Medicine
Wujin Sun et al.
ADVANCED SCIENCE (2019)
Mechanical performance of additively manufactured meta-biomaterials
Amir A. Zadpoor
ACTA BIOMATERIALIA (2019)
Fabrication and mechanical characterization of 3D printed vertical uniform and gradient scaffolds for bone and osteochondral tissue engineering
Sean M. Bittner et al.
ACTA BIOMATERIALIA (2019)
Characterization of printed PLA scaffolds for bone tissue engineering
Agathe Gremare et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect
Fei Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Precision and trueness of dental models manufactured with different 3-dimensional printing techniques
Soo-Yeon Kim et al.
AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2018)
Simulated tissue growth for 3D printed scaffolds
Paul F. Egan et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2018)
A Novel Design Method for Nonuniform Lattice Structures Based on Topology Optimization
Yafeng Han et al.
JOURNAL OF MECHANICAL DESIGN (2018)
Comparison of the mechanobiological performance of bone tissue scaffolds based on different unit cell geometries
Oscar L. Rodriguez-Montano et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Influence of crosslinking on the mechanical behavior of 3D printed alginate scaffolds: Experimental and numerical approaches
Saman Naghieh et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Lattice Microarchitecture for Bone Tissue Engineering from Calcium Phosphate Compared to Titanium
Tse-Hsiang Chen et al.
TISSUE ENGINEERING PART A (2018)
Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting
Fei Liu et al.
MATERIALS (2018)
Addressing Unmet Clinical Needs with 3D Printing Technologies
Udayan Ghosh et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Osteoconductive Microarchitecture of Bone Substitutes for Bone Regeneration Revisited
Chafik Ghayor et al.
FRONTIERS IN PHYSIOLOGY (2018)
Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading
I. Maskery et al.
MATERIALS & DESIGN (2018)
Toxicological assessment of additively manufactured methacrylates for medical devices in dentistry
Frank Alifui-Segbaya et al.
ACTA BIOMATERIALIA (2018)
3D Printing of Porous Scaffolds with Controlled Porosity and Pore Size Values
Irene Buj-Corral et al.
MATERIALS (2018)
An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects
Zeljka P. Kacarevic et al.
MATERIALS (2018)
PrinterCAD: a QFD and TRIZ integrated design solution for large size open moulding manufacturing
D. Francia et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2018)
Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials
Oraib Al-Ketan et al.
ADDITIVE MANUFACTURING (2018)
Bioabsorbable self-retaining PLA/nano-sized beta-TCP cervical spine interbody fusion cage in goat models: an in vivo study
Lu Cao et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2017)
Physically Realizable Three-Dimensional Bone Prosthesis Design With Interpolated Microstructures
Andrew D. Cramer et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Design of Hierarchical Three-Dimensional Printed Scaffolds Considering Mechanical and Biological Factors for Bone Tissue Engineering
Paul F. Egan et al.
JOURNAL OF MECHANICAL DESIGN (2017)
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Guoying Dong et al.
JOURNAL OF MECHANICAL DESIGN (2017)
Corrosion in the Human Body: Metallic Implants in the Complex Body Environment
Jeremy L. Gilbert
CORROSION (2017)
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Qing Gao et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Osseointegration of Coarse and Fine Textured Implants Manufactured by Electron Beam Melting and Direct Metal Laser Sintering
David S. Ruppert et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2017)
Biocompatibility of Photopolymers in 3D Printing
Frank Alifui-Segbaya et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2017)
Clinically Relevant Bioprinting Workflow and Imaging Process for Tissue Construct Design and Validation
Carlos Kengla et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2017)
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Qing Gao et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Computationally designed lattices with tuned properties for tissue engineering using 3D printing
Paul F. Egan et al.
PLOS ONE (2017)
In situ repair of bone and cartilage defects using 3D scanning and 3D printing
Lan Li et al.
SCIENTIFIC REPORTS (2017)
Three-dimensional nano-architected scaffolds with tunable stiffness for efficient bone tissue growth
Alessandro Maggi et al.
ACTA BIOMATERIALIA (2017)
Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants
D. Melancon et al.
ACTA BIOMATERIALIA (2017)
Scaffold curvature-mediated novel biomineralization process originates a continuous soft tissue-to-bone interface
Michael Paris et al.
ACTA BIOMATERIALIA (2017)
An Integrated Design, Material, and Fabrication Platform for Engineering Biomechanically and Biologically Functional Soft Tissues
Onur Bas et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Osteogenic cell functionality on 3-dimensional nano-scaffolds with varying stiffness
Alessandro Maggi et al.
EXTREME MECHANICS LETTERS (2017)
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder JettingSelection Guidelines
Prashanth Konda Gokuldoss et al.
MATERIALS (2017)
3D-printed cellular structures for bone biomimetic implants
Sakkadech Limmahakhun et al.
ADDITIVE MANUFACTURING (2017)
Medical big data: promise and challenges
Choong Ho Lee et al.
KIDNEY RESEARCH AND CLINICAL PRACTICE (2017)
Geometrical aspects of patient-specific modelling of the intervertebral disc: collagen fibre orientation and residual stress distribution
Giacomo Marini et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2016)
High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
Sajad Arabnejad et al.
ACTA BIOMATERIALIA (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Coupling curvature-dependent and shear stress-stimulated neotissue growth in dynamic bioreactor cultures: a 3D computational model of a complete scaffold
Y. Guyot et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2016)
Powder-based 3D printing for bone tissue engineering
G. Brunello et al.
BIOTECHNOLOGY ADVANCES (2016)
Computational comparison of three posterior lumbar interbody fusion techniques by using porous titanium interbody cages with 50% porosity
Yung-Heng Lee et al.
COMPUTERS IN BIOLOGY AND MEDICINE (2016)
Biomechanical investigation into the structural design of porous additive manufactured cages using numerical and experimental approaches
Pei-I Tsai et al.
COMPUTERS IN BIOLOGY AND MEDICINE (2016)
A Mechanobiology-based Algorithm to Optimize the Microstructure Geometry of Bone Tissue Scaffolds
Antonio Boccaccio et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL SCIENCES (2016)
The D3 Methodology: Bridging Science and Design for Bio-Based Product Development
Paul Egan et al.
JOURNAL OF MECHANICAL DESIGN (2016)
Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
Naoya Taniguchi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
A synergistic approach to the design, fabrication and evaluation of 3D printed micro and nano featured scaffolds for vascularized bone tissue repair
Benjamin Holmes et al.
NANOTECHNOLOGY (2016)
An integrated design and fabrication strategy for entirely soft, autonomous robots
Michael Wehner et al.
NATURE (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
Geometry Design Optimization of Functionally Graded Scaffolds for Bone Tissue Engineering: A Mechanobiological Approach
Antonio Boccaccio et al.
PLOS ONE (2016)
Specific Yielding of Selective Laser-Melted Ti6Al4V Open-Porous Scaffolds as a Function of Unit Cell Design and Dimensions
Volker Weissmann et al.
METALS (2016)
Design and Development of Scaffolds for Tissue Engineering Using Three-Dimensional Printing for Bio-Based Applications
Fatah N. Habib et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2016)
Influence of Microarchitecture on Osteoconduction and Mechanics of Porous Titanium Scaffolds Generated by Selective Laser Melting
Michael de Wild et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2016)
Governing Equations of Tissue Modelling and Remodelling: A Unified Generalised Description of Surface and Bulk Balance
Pascal R. Buenzli
PLOS ONE (2016)
Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects
Seyed-Iman Roohani-Esfahani et al.
SCIENTIFIC REPORTS (2016)
A novel open-porous magnesium scaffold with controllable microstructures and properties for bone regeneration
Meng-qi Cheng et al.
SCIENTIFIC REPORTS (2016)
Recent advances in nano scaffolds for bone repair
Huan Yi et al.
BONE RESEARCH (2016)
A three-dimensional computational fluid dynamics model of shear stress distribution during neotissue growth in a perfusion bioreactor
Y. Guyot et al.
BIOTECHNOLOGY AND BIOENGINEERING (2015)
Design of Polymer Scaffolds for Tissue Engineering Applications
Hamidreza Mehdizadeh et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell
J. Kadkhodapour et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Bringing computational models of bone regeneration to the clinic
Aurelie Carlier et al.
WILEY INTERDISCIPLINARY REVIEWS-SYSTEMS BIOLOGY AND MEDICINE (2015)
The role of mechanics in biological and bio-inspired systems
Paul Egan et al.
NATURE COMMUNICATIONS (2015)
Biodegradable Materials for Bone Repair and Tissue Engineering Applications
Zeeshan Sheikh et al.
MATERIALS (2015)
Bone tissue regeneration: the role of scaffold geometry
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2015)
Multiscale fluid-structure interaction modelling to determine the mechanical stimulation of bone cells in a tissue engineered scaffold
Feihu Zhao et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2015)
Design Control for Clinical Translation of 3D Printed Modular Scaffolds
Scott J. Hollister et al.
ANNALS OF BIOMEDICAL ENGINEERING (2015)
A computational model for cell/ECM growth on 3D surfaces using the level set method: a bone tissue engineering case study
Y. Guyot et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2014)
Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling
M. R. Karamooz Ravari et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)
A comparative study of oxygen diffusion in tissue engineering scaffolds
T. Fiedler et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)
Cellular Automata Simulation of Osteoblast Growth on Microfibrous-Carbon-Based Scaffolds
Jarema S. Czarnecki et al.
TISSUE ENGINEERING PART A (2014)
Pore Geometry Regulates Early Stage Human Bone Marrow Cell Tissue Formation and Organisation
J. Knychala et al.
ANNALS OF BIOMEDICAL ENGINEERING (2013)
The Pivotal Role of Vascularization in Tissue Engineering
Francois A. Auger et al.
ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 15 (2013)
Three-dimensional modeling of angiogenesis in porous biomaterial scaffolds
Hamidreza Mehdizadeh et al.
BIOMATERIALS (2013)
A three-dimensional model for tissue deposition on complex surfaces
Cecile M. Bidan et al.
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2013)
Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique
M. Smith et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Porous Biodegradable Lumbar Interbody Fusion Cage Design and Fabrication Using Integrated Global-Local Topology Optimization With Laser Sintering
Heesuk Kang et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
G. Campoli et al.
MATERIALS & DESIGN (2013)
Geometry-Driven Cell Organization Determines Tissue Growths in Scaffold Pores: Consequences for Fibronectin Organization
Pascal Joly et al.
PLOS ONE (2013)
Geometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds
Cecile M. Bidan et al.
ADVANCED HEALTHCARE MATERIALS (2013)
Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium alloy under different loading conditions
Jan Wieding et al.
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2013)
The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
S. Van Bael et al.
ACTA BIOMATERIALIA (2012)
Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency
Jorge M. Sobral et al.
ACTA BIOMATERIALIA (2011)
The effect of pore size on tissue ingrowth and neovascularization in porous bioceramics of controlled architecture in vivo
Bai Feng et al.
BIOMEDICAL MATERIALS (2011)
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Effect of cell seeding and mechanical loading on vascularization and tissue formation inside a scaffold: A mechano-biological model using a lattice approach to simulate cell activity
Sara Checa et al.
JOURNAL OF BIOMECHANICS (2010)
Topology optimization of three dimensional tissue engineering scaffold architectures for prescribed bulk modulus and diffusivity
Heesuk Kang et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2010)
Characterization of the structure and permeability of titanium foams for spinal fusion devices
R. Singh et al.
ACTA BIOMATERIALIA (2009)
A review on biodegradable polymeric materials for bone tissue engineering applications
Muhammad Iqbal Sabir et al.
JOURNAL OF MATERIALS SCIENCE (2009)
A mathematical approach to bone tissue engineering
J. A. Sanz-Herrera et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2009)
Computer-aided design and finite-element modelling of biomaterial scaffolds for bone tissue engineering
Damien Lacroix et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2009)
The effect of geometry on three-dimensional tissue growth
Monika Rumpler et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2008)
A mathematical model for bone tissue regeneration inside a specific type of scaffold
J. A. Sanz-Herrera et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2008)
Simulation of tissue differentiation in a scaffold as a function of porosity, Young's modulus and dissolution rate: Application of mechanobiological models in tissue engineering
Damien P. Byrne et al.
BIOMATERIALS (2007)
Combining experiments with multi-cell agent-based modeling to study biological tissue patterning
Bryan C. Thorne et al.
BRIEFINGS IN BIOINFORMATICS (2007)
Three-dimensional growth behavior of osteoblasts on biomimetic hydroxylapatite scaffolds
M. Rumpler et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
The properties of foams and lattices
MF Ashby
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
Finite element modeling concepts and linear analyses of 3D regular open cell structures
MH Luxner et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Porous scaffold design for tissue engineering
SJ Hollister
NATURE MATERIALS (2005)
Diffusion in musculoskeletal tissue engineering scaffolds: Design issues related to porosity, permeability, architecture, and nutrient mixing
TS Karande et al.
ANNALS OF BIOMEDICAL ENGINEERING (2004)
In vitro and in vivo degradation of bioabsorbable PLLA spinal fusion cages
M van Dijk et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
The effect of cage stiffness on the rate of lumbar interbody fusion - An in vivo model using poly(L-lactic acid) and titanium cages
M van Dijk et al.
SPINE (2002)
Biomaterial developments for bone tissue engineering
KJL Burg et al.
BIOMATERIALS (2000)
分享论文
