相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A New Method of Characterizing Material Viscoelastic Property by Using Vector Fitting
Huimin Li et al.
POLYMER COMPOSITES (2016)
A thermo-viscoelastic model of process-induced residual stresses in composite structures with considering thermal dependence
Anxin Ding et al.
COMPOSITE STRUCTURES (2016)
Kinetic and thermo-viscoelastic characterisation of the epoxy adhesive in GLARE
M. Abouhamzeh et al.
COMPOSITE STRUCTURES (2015)
A three-dimensional thermo-viscoelastic analysis of process-induced residual stress in composite laminates
Anxin Ding et al.
COMPOSITE STRUCTURES (2015)
Effect of fibre wrinkling to the spring-in behaviour of L-shaped composite materials
Kenan Cinar et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Investigation of process induced warpage for pultrusion of a rectangular hollow profile
Ismet Baran et al.
COMPOSITES PART B-ENGINEERING (2015)
Cure strain in thick CFRP laminate: optical-fiber-based distributed measurement and numerical simulation
Y. Ito et al.
ADVANCED COMPOSITE MATERIALS (2015)
Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approaches
Ismet Baran et al.
APPLIED COMPOSITE MATERIALS (2015)
Pultrusion of a vertical axis wind turbine blade part-I: 3D thermo-chemical process simulation
Ismet Baran et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)
Pultrusion of a vertical axis wind turbine blade part-II: combining the manufacturing process simulation with a subsequent loading scenario
Ismet Baran et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)
Modelling the pultrusion process of an industrial L-shaped composite profile
Ismet Baran et al.
COMPOSITE STRUCTURES (2014)
Tooling geometry optimization for compensation of cure-induced distortions of a curved carbon/epoxy C-spar
B. Wucher et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark results
U. Sachs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Dry friction characterisation of carbon fibre tow and satin weave fabric for composite applications
B. Cornelissen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Formability analyses of uni-directional and textile reinforced thermoplastics
S. P. Haanappel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Material characterization of a polyester resin system for the pultrusion process
Ismet Baran et al.
COMPOSITES PART B-ENGINEERING (2014)
Out-of-plane ply wrinkling defects during consolidation over an external radius
T. J. Dodwell et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Modelling manufacturing deformations in corner sections made of composite materials
Kenan Cinar et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Predicting dimensional distortions in roll forming of comingled polypropylene/glass fiber thermoplastic composites: On the effect of matrix viscoelasticity
Corey Lynam et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Analysis of process-induced deformations in thermoplastic composite materials
Christian Brauner et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
DeepWind-from idea to 5 MW concept
Uwe S. Paulsen et al.
EERA DEEPWIND' 2014, 11TH DEEP SEA OFFSHORE WIND R&D CONFERENCE (2014)
Reliability Estimation of the Pultrusion Process Using the First-Order Reliability Method (FORM)
Ismet Baran et al.
APPLIED COMPOSITE MATERIALS (2013)
Optimization of the Thermosetting Pultrusion Process by Using Hybrid and Mixed Integer Genetic Algorithms
Ismet Baran et al.
APPLIED COMPOSITE MATERIALS (2013)
Thermo-Chemical Modelling Strategies for the Pultrusion Process
Ismet Baran et al.
APPLIED COMPOSITE MATERIALS (2013)
A new mechanism for the formation of ply wrinkles due to shear between plies
James S. Lightfoot et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Damage progression and defect sensitivity: An experimental study of representative wrinkles in tension
L. D. Bloom et al.
COMPOSITES PART B-ENGINEERING (2013)
The effect of thermal contact resistance on the thermosetting pultrusion process
Ismet Baran et al.
COMPOSITES PART B-ENGINEERING (2013)
Process induced residual stresses and distortions in pultrusion
Ismet Baran et al.
COMPOSITES PART B-ENGINEERING (2013)
Prediction of Residual Stresses and Distortion in Carbon Fiber-Epoxy Composite Parts Due to Curing Process Using Finite Element Analysis
Behrouz Tavakol et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Computational Approaches for Modeling the Multiphysics in Pultrusion Process
P. Carlone et al.
ADVANCES IN MECHANICAL ENGINEERING (2013)
Design Optimization of a 5 MW Floating Offshore Vertical-Axis Wind Turbine
Uwe Schmidt Paulsen et al.
DEEPWIND'2013 - SELECTED PAPERS FROM 10TH DEEP SEA OFFSHORE WIND R&D CONFERENCE (2013)
The Internal Stress Evaluation of Pultruded Blades for a Darrieus Wind Turbine
Ismet Baran et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
Role of Tool-Part Interaction in Consolidation of L-Shaped Laminates during Autoclave Process
Jing Sun et al.
APPLIED COMPOSITE MATERIALS (2012)
Experimental identification of process parameters inducing warpage of autoclave-processed CFRP parts
D. Stefaniak et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Investigation of process-induced strains development by fibre Bragg grating sensors in resin transfer moulded composites
Lolei Khoun et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Model development for the formation of resin-rich zones in composites processing
Chensong Dong
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
A lubrication approach to friction in thermoplastic composites forming processes
R. H. W. ten Thije et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
A semi-analytical simulation strategy and its application to warpage of autoclave-processed CFRP parts
E. Kappel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Development of the properties of a carbon fibre reinforced thermosetting composite through cure
Nuri Ersoy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Investigation of the dimensional stability of carbon epoxy cylinders manufactured by resin transfer moulding
Lolei Khoun et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Material characterization and residual stresses simulation during the manufacturing process of epoxy matrix composites
Y. Abou Msallem et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Role of tool-part interaction in process-induced warpage of autoclave-manufactured composite structures
X. Zeng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Experimental study of tool-part interaction during autoclave processing of thermoset polymer composite structures
V. Kaushik et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Modelling of the spring-in phenomenon in curved parts made of a thermosetting composite
Nuri Ersoy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Thermo-viscoelastic analysis of the integrated T-shaped composite structures
Li Jun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Characterization Methodology of Thermoset Resins for the Processing of Composite Materials - Case Study: CYCOM 890RTM Epoxy Resin
Lolei Khoun et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Cure Kinetics Modeling and Cure Shrinkage Behavior of a Thermosetting Composite
Nuri Ersoy et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Designing curing conditions in order to analyse the influence of process-induced stresses upon some mechanical properties of carbon/epoxy laminates at constant Tg and degree of cure
Philippe A. Olivier et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
Closed-form solution for process-induced stresses and deformation of a composite part cured on a solid tool: Part II - Curved geometries
Abdul Rahim Ahamed Arafath et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Modeling the process-induced dimensional variations of general curved composite components and assemblies
Chensong Dong
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Analysis of Deformation and Residual Stresses in Composites Processed on a Carbon Foam Tooling
M. Khairul Alam et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Closed-form solution for process-induced stresses and deformation of a composite part cured on a solid tool: Part I - Flat geometries
Abdul Rahim Ahamed Arafath et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Investigation on the spring-in phenomenon of carbon nanofiber-glass fiber/polyester composites manufactured with vacuum assisted resin transfer molding
Kuang-Ting Hsiao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures
K. Potter et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Experimental investigation of the effect of the mould thermal expansion on the development of internal stresses during carbon fibre composite processing
R. de Oliveira et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Numerical simulation of two-dimensional flow and compaction during the consolidation of laminated composites
Min Li et al.
POLYMER COMPOSITES (2008)
Shear-lag analysis of the effect of thickness on spring-in of curved composites
Michael R. Wisnom et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
Sources of variability in uncured aerospace grade unidirectional carbon fibre epoxy preimpregnate
K. Potter et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Residual stresses in thermoplastic composites- A study of the literature- Part II: Experimental techniques
Patricia P. Parlevliet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Residual stresses in thermoplastic composites - a study of the literature. Part III: Effects of thermal residual stresses
Patricia P. Parlevliet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Modeling of in situ strength development for the thermoplastic composite tow placement process
John Tierney et al.
JOURNAL OF COMPOSITE MATERIALS (2006)
Mechanisms generating residual stresses and distortion during manufacture of polymer-matrix composite structures
MR Wisnom et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Warpage induced in bi-material specimens: Coefficient of thermal expansion, chemical shrinkage and viscoelastic modulus evolution during cure
M Zarrelli et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Residual stresses in thermoplastic composites - A study of the literature - Part I: Formation of residual stresses
Patricia P. Parlevliet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Thermoviscoelastic anisotropic analysis of process induced residual stresses and dimensional stability in real polymer matrix composite components
S Clifford et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Cure-induced residual strain build-up in a thermoset resin
V Antonucci et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Effective moduli and failure considerations for composites with periodic fiber waviness
G Karami et al.
COMPOSITE STRUCTURES (2005)
Prediction of shape distortions for a curved composite c-spar
JM Svanberg et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2005)
Numerical analysis of cure temperature and internal stresses in thin and thick RTM parts
E Ruiz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
An experimental method to study the frictional processes during composites manufacturing
N Ersoy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Development of spring-in angle during cure of a thermosetting composite
N Ersoy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Assembly dimensional variation modelling and optimization for the resin transfer moulding process
CS Dong et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2004)
Prediction of shape distortions. Part II. Experimental validation and analysis of boundary conditions
JM Svanberg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Tool-part interaction in composites processing. Part I: experimental investigation and analytical model
G Twigg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Tool-part interaction in composites processing. Part II: numerical modelling
G Twigg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Process-induced residual stress analysis by resin transfer molding
YK Kim
JOURNAL OF COMPOSITE MATERIALS (2004)
Finite element micromechanies for stiffness and strength of wavy fiber composites
MR Garnich et al.
JOURNAL OF COMPOSITE MATERIALS (2004)
Dimension variation prediction for composites with finite element analysis and regression modeling
CS Dong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Finite element based prediction of process-induced deformation of autoclaved composite structures using 2D process analysis and 3D structural analysis
G Fernlund et al.
COMPOSITE STRUCTURES (2003)
An experimental method for quantifying tool-part shear interaction during composites processing
G Twigg et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Development of curvature during the cure of AS4/8552 [0/90] unsymmetric composite plates
M Gigliotti et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Analysis of process-induced residual stresses in tape placement
FO Sonmez et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2002)
Cure kinetics of the ring-opening metathesis polymerization of dicyclopentadiene
MR Kessler et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2002)
Modeling and simulation of two-dimensional consolidation for thermoset matrix composites
M Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Numerical analysis of the dimensional stability of thermoplastic composites using a thermoviscoelastic approach
BS Kim et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Cure cycle effect on composite structures manufactured by resin transfer molding
YK Kim et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimensional fidelity of autoclave-processed composite parts
G Fernlund et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Isolating components of processing induced warpage in laminated composites
DA Darrow et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Thermoviscoelastic analysis of residual curing stresses and the influence of autoclave pressure on these stresses in carbon/epoxy laminates
KE Tarsha-Kurdi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
On the properties of quasi-isotropic laminates
R Akkerman
COMPOSITES PART B-ENGINEERING (2002)
A thermoviscoelastic analysis of process-induced internal stresses in thermoplastic matrix composites
P Sunderland et al.
POLYMER COMPOSITES (2001)
An experimental investigation on mechanisms for manufacturing induced shape distortions in homogeneous and balanced laminates
JM Svanberg et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Process induced stress for woven fabric thick section composite structures
XG Huang et al.
COMPOSITE STRUCTURES (2000)
Modelling of residual stresses in compression moulded glass-mat reinforced thermoplastics
A Trende et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
A new method to reduce cure-induced stresses in thermoset polymer composites, part III: Correlating stress history to viscosity, degree of cure, and cure shrinkage
JD Russell et al.
JOURNAL OF COMPOSITE MATERIALS (2000)
A new method to reduce cure-induced stresses in thermoset polymer composites, part I: Test method
MS Madhukar et al.
JOURNAL OF COMPOSITE MATERIALS (2000)
分享论文
