相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Synergistic effects of holding time at intercritical annealing temperature and initial microstructure on the mechanical properties of dual phase steel
Fatemeh Jamei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing
Sara Kheiri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructural mechanisms controlling the mechanical behaviour of ultrafine grained martensite/austenite microstructures in a metastable stainless steel
C. Celada-Casero et al.
MATERIALS & DESIGN (2019)
Enhanced Ductility of a Fine-Grained Mg-Gd-Al-Zn Magnesium Alloy by Hot Extrusion
Bita Pourbahari et al.
ADVANCED ENGINEERING MATERIALS (2018)
The Effects of Grain Refinement and Rare Earth Intermetallics on Mechanical Properties of As-Cast and Wrought Magnesium Alloys
Bita Pourbahari et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure
Jiansheng Li et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Mechanical properties of a hot deformed Al-Mg2Si in-situ composite
Rashadoddin Zamani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Structural changes in metastable austenitic steel during equal channel angular pressing and subsequent cyclic deformation
S. V. Dobatkin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effects of concurrent strain induced martensite formation on tensile and texture properties of 304L stainless steel of varying grain size distribution
Sailaja Sharma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural evolution and recrystallization behavior of cold rolled austenitic stainless steel with dual phase microstructure during isothermal annealing
G. S. Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The significant role of heating rate on reverse transformation and coordinated straining behavior in a cold-rolled austenitic stainless steel
G. -S. Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural Evolutions During Reversion Annealing of Cold-Rolled AISI 316 Austenitic Stainless Steel
Meysam Naghizadeh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Influence of Strain State on the Kinetics of Martensitic Transformation Induced Plasticity (TRIP) in AISI 304 Stainless Steel
Mostafa Mansourinejad et al.
STEEL RESEARCH INTERNATIONAL (2018)
Effect of TMCP on Microstructure and Mechanical Properties of 304 Stainless Steel
Pratik Mallick et al.
STEEL RESEARCH INTERNATIONAL (2018)
Mechanical Properties and Deformation Behavior of Nano/ultrafine Fe-18Cr-8Ni Austenitic Steel Processed by Low Temperature Rolling and Annealing Treatment
Jia Liu et al.
STEEL RESEARCH INTERNATIONAL (2018)
Thermal stability and tensile property of 316L stainless steel with heterogeneous lamella structure
Shuaizhuo Wang et al.
VACUUM (2018)
Processing of fine grained AISI 304L austenitic stainless steel by cold rolling and high-temperature short-term annealing
Meysam Naghizadeh et al.
MATERIALS RESEARCH EXPRESS (2018)
Mechanical properties and fracture behavior of intercritically annealed AISI 4130 chromoly steel
Mehran Zamani et al.
MATERIALS RESEARCH EXPRESS (2018)
Hot-workability of super-304H exhibiting continuous to discontinuous dynamic recrystallization transition
K. Arun Babu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of microstructural refinement and intercritical annealing time on mechanical properties of high-formability dual phase steel
Mahsa Nouroozi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Modeling the kinetics of deformation-induced martensitic transformation in AISI 316 metastable austenitic stainless steel
Meysam Naghizadeh et al.
VACUUM (2018)
Stability of grain-refined reversed structures in a 301LN austenitic stainless steel under cyclic loading
Antti Jarvenpaa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Toward unraveling the effects of intermetallic compounds on the microstructure and mechanical properties of Mg-Gd-Al-Zn magnesium alloys in the as-cast, homogenized, and extruded conditions
Bita Pourbahari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The TRIP Effect and Its Application in Cold Formable Sheet Steels
Wolfgang Bleck et al.
STEEL RESEARCH INTERNATIONAL (2017)
Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility
X. L. Wu et al.
ACTA MATERIALIA (2016)
Mechanical properties and strain hardening behavior of phase reversion-induced nano/ultrafine Fe-17Cr-6Ni austenitic structure steel
Chengshuai Lei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Mechanical characterisation of microstructural evolution in 304 stainless steel subjected to high-pressure torsion with and without hydrogen pre-charging
Yoji Mine et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Elucidating the Effect of Alloying Elements on the Behavior of Austenitic Stainless Steels at Elevated Temperatures
Meysam Naghizadeh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Microstructural Evolutions During Annealing of Plastically Deformed AISI 304 Austenitic Stainless Steel: Martensite Reversion, Grain Refinement, Recrystallization, and Grain Growth
Meysam Naghizadeh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Low temperature nitriding of AISI 300 and 200 series austenitic stainless steels
Francesca Borgioli et al.
VACUUM (2016)
Superior Strength of Austenitic Steel Produced by Combined Processing, including Equal-Channel Angular Pressing and Rolling
Marina V. Karavaeva et al.
METALS (2016)
Enhanced Mechanical Properties of Microalloyed Austenitic Stainless Steel Produced by Martensite Treatment
Mohammad Shirdel et al.
ADVANCED ENGINEERING MATERIALS (2015)
Friction-stir welding of ultrafine grained austenitic 304L stainless steel produced by martensitic thermomechanical processing
S. Sabooni et al.
MATERIALS & DESIGN (2015)
Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical properties, and TRIP effect
M. Shirdel et al.
MATERIALS CHARACTERIZATION (2015)
Enhancement of mechanical properties of a TRIP-aided austenitic stainless steel by controlled reversion annealing
A. S. Hamada et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hot deformation behavior, dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels
Sepideh Saadatkia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Correlation Between Microstructure and Mechanical Properties Before and After Reversion of Metastable Austenitic Stainless Steels
Gemma Fargas et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
σ3 CSL boundary distributions in an austenitic stainless steel subjected to multidirectional forging followed by annealing
Marina Tikhonova et al.
PHILOSOPHICAL MAGAZINE (2014)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Effect of Grain Size on Thermal and Mechanical Stability of Austenite in Metastable Austenitic Stainless Steel
Yoshikazu Matsuoka et al.
ISIJ INTERNATIONAL (2013)
An investigation into the room temperature mechanical properties of nanocrystalline austenitic stainless steels
Mostafa Eskandari et al.
MATERIALS & DESIGN (2013)
Dynamic recovery and dynamic recrystallization competition on a Nb- and N-bearing austenitic stainless steel biomaterial: Influence of strain rate and temperature
R. C. Souza et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Phase reversion induced nanograined austenitic stainless steels: microstructure, reversion and deformation mechanisms
R. D. K. Misra et al.
MATERIALS SCIENCE AND TECHNOLOGY (2013)
EBSD study of a hot deformed austenitic stainless steel
H. Mirzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Stress-Induced Martensitic Transformation Behaviors at Various Temperatures and Their TRIP Effects in SUS304 Metastable Austenitic Stainless Steel
Noriyuki Tsuchida et al.
ISIJ INTERNATIONAL (2011)
Hot deformation behavior of a medium carbon microalloyed steel
H. Mirzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A Study on Microstructural Evolution and Dynamic Recrystallization During Isothermal Deformation of a Ti-Modified Austenitic Stainless Steel
Sumantra Mandal et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Influence of Pre-Transformed Martensite on Work-Hardening Behavior of SUS 304 Metastable Austenitic Stainless Steel
Xue Zong-yu et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2010)
Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process
Farnoosh Forouzan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
ANN modeling of strain-induced martensite and its applications in metastable austenitic stainless steels
H. Mirzadeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Recent developments in stainless steels
K. H. Lo et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)
Advanced high strength steels for automotive industry: a review
R. Kuziak et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2008)
Correlation between processing parameters and strain-induced martensitic transformation in cold worked AISI 301 stainless steel
H. Mirzadeh et al.
MATERIALS CHARACTERIZATION (2008)
Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation
A. Dehghan-Manshadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Effect of Y for enhanced age hardening response and mechanical properties of Mg-Gd-Y-Zr alloys
Jun Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel
Amar K. De et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Tensile properties of a nanocrystalline 316L austenitic stainless steel
XH Chen et al.
SCRIPTA MATERIALIA (2005)
Effect of strain rate on the strain-induced γ→α′-martensite transformation and mechanical properties of austenitic stainless steels
J Talonen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Strengthening via the formation of strain-induced martensite in stainless steels
K Spencer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Tensile properties of extruded ZK60-RE alloys
CJ Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
The influence of copper addition on the formability of AISI 304 stainless steel
BM Gonzalez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Analysis of the recrystallization and grain growth processes in AISI 316 stainless steel
A Di Schino et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Ultrafine grain structure through dynamic recrystallization for Type 304 stainless steel
I Salvatori et al.
ISIJ INTERNATIONAL (2002)
Static recrystallization kinetics of 304 stainless steels
SH Cho et al.
JOURNAL OF MATERIALS SCIENCE (2001)
Computational simulation of the dependence of the austenitic grain size on the deformation behavior of TRIP steels
T Iwamoto et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2000)
分享论文
