Numerical studies of the flow structure and aerodynamic forces on two tandem square cylinders with different chamfered-corner ratios

Three-dimensional large eddy simulations were carried out to investigate the flow over two tandem square cylinders for a fixed spacing ratio of L/D = 4 and a Reynolds number of 5.3 x 10(3), where L is the cylinder center-to-center distance between the cylinders and D is the cylinder width. The corners of each cylinder were chamfered with a ratio of xi = B/D = 0%, 5%, 10%, and 15%, where B is the chamfered corner dimension. The focus is given on how xi influences the flow structure, wake recirculation bubble, flow separation bubble, Strouhal number (St), aerodynamic force, and phase lag (phi) between vortex sheddings from the cylinders. With increasing xi, the recirculation bubble length and minimum velocity in the wake of the upstream cylinder remain more or less constant and are close to those of a single cylinder, while the minimum velocity in the wake of the downstream cylinder dramatically drops between xi = 0% and 5%. While the flow over the downstream remains attached on the side surfaces, that over the upstream cylinder forms primary and secondary side-surface bubbles on the side surface, and both shrink with increasing xi. In addition, the leading chamfered corners are accompanied by corner bubbles that play an important role in the flow structure modification. Therefore, the time-mean drag and fluctuating lift of the upstream cylinder remarkably decrease for 0% <= xi <= 5% and remain almost unchanged for 5% < xi <= 15%, whereas those on the downstream cylinder diminish in the whole range of 0% <= xi <= 15%. The Strouhal number (St) being identical for the two cylinders grows from 0.104 to 0.132 when xi is increased from 0% to 15%. Overall, the influence of xi on the wake structure and aerodynamics is remarkable for 0% <= xi <= 5% because of the corner bubbles and is less for 5% < xi <= 15%.