Zr/ZrC modified layer formed on AISI 440B stainless steel by plasma Zr-alloying

The surface Zr/ZrC gradient alloying layer was prepared by double glow plasma surface alloying technique to increase the surface hardness and wear resistance of AISI 440B stainless steel. The microstructure of the Zr/ZrC alloying layer formed at different alloying temperatures and times as well as its formation mechanism were discussed by using scanning electron microscopy, glow discharge optical emission spectrum, X-ray diffraction and X-ray photoelectron spectroscopy. The adhesive strength, hardness and tribological property of the Zr/ZrC alloying layer were also evaluated in the paper. The alloying surface consists of the Zr-top layer and ZrC-subsurface layer which adheres strongly to the AISI 440B steel substrate. The thickness of the Zr/ZrC alloying layer increases gradually from 16 mu m to 23 mu m with alloying temperature elevated from 900 degrees C to 1000 degrees C. With alloying time from 0.5 h to 4 h, the alloyed depth increases from 3 mu m to 30 mu m, and the ZrC-rich alloyed thickness vs time is basically parabola at temperature of 1000 degrees C. Both the hardness and wear resistance of the Zr/ZrC alloying layer obviously increase compared with untreated AISI 440B steel. (C) 2016 Elsevier B.V. All rights reserved.