Surface Al doping of 4H-SiC via low temperature annealing

We present a method of forming shallow p-doping on a 4H-SiC surface by depositing a thin Al layer (d = 5 nm) and then thermally annealing it at 1000 degrees C for 10 min. A secondary ion mass spectrometry analysis of the annealed Al/SiC sample reveals an Al concentration in excess of 10(17) cm(-3) up to a depth of d <= 250 nm. I-V measurements and CV characterizations of Ti-SiC Schottky barrier diodes (SBDs) fabricated on a n-type SiC epi-wafer indicate that the shallow Al doping increases the built-in potential of the junction and the barrier height by Delta V-bi = 0.51 eV and Delta phi(B) = 0.26 eV, respectively. Assuming a rectangular doping profile, calculations of the built-in voltage shift and the Schottky barrier height indicate that partial dopant activation (activation ratio similar to 2%) can induce the observed barrier height shift. The shallow doping method was then used to fabricate junction terminations in SBDs which increased the breakdown voltage and reduced the reverse leakage current. Technology CAD simulations of the SBD with and without doping verify that a reduction of peak electric field can explain the improvement of the breakdown voltage. Published by AIP Publishing.