相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Statistical assessment of notch toughness against cleavage fracture of ferritic steels
G. Qian et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Investigation of the effect of porosity on the high cycle fatigue behaviour of cast Al-Si alloy by X-ray micro-tomography
Viet-Duc Le et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Nanograin layer formation at crack initiation region for very-high-cycle fatigue of a Ti-6Al-4V alloy
H. Su et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Mean stress effect correction in strain energy-based fatigue life prediction of metals
Shun-Peng Zhu et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2017)
Elastic-plastic fracture response of multiple 3-D interacting cracks in offshore pipelines subjected to large plastic strains
M. Z. Ariffin et al.
ENGINEERING FAILURE ANALYSIS (2017)
The imaging of failure in structural materials by synchrotron radiation X-ray microtomography
S. C. Wu et al.
ENGINEERING FRACTURE MECHANICS (2017)
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Internal crack initiation characteristics and early growth behaviors for very high-cycle fatigue of a titanium alloy electron beam welded joints
Yichao Zheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
S. Tammas-Williams et al.
SCIENTIFIC REPORTS (2017)
3D characterization and modeling of low cycle fatigue damage mechanisms at high temperature in a cast aluminum alloy
Sebastien Dezecot et al.
ACTA MATERIALIA (2017)
Study on laser-MIG hybrid welding characteristics of A7N01-T6 aluminum alloy
Sang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Influence of surface and internal casting defects on the fatigue behaviour of A357-T6 cast aluminium alloy
I. Serrano-Munoz et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
On the fatigue performance of laser hybrid welded high Zn 7000 alloys for next generation railway components
S. C. Wu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Structural imperfections in additive manufacturing perceived from the X-ray micro-tomography perspective
Hedi Nouri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography
I. Maskery et al.
MATERIALS CHARACTERIZATION (2016)
Image-based numerical simulation of the local cyclic deformation behavior around cast pore in steel
Lihe Qian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Influence of pores on crack initiation in monotonic tensile and cyclic loadings in lost foam casting A319 alloy by using 3D in-situ analysis
Long Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Corner fatigue cracking behavior of hybrid laser AA7020 welds by synchrotron X-ray computed microtomography
S. C. Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
On the role of melt flow into the surface structure and porosity development during selective laser melting
Chunlei Qiu et al.
ACTA MATERIALIA (2015)
Effect of load ratio on fatigue crack growth in the near-threshold regime: A literature review, and a combined crack closure and driving force approach
Ming-Liang Zhu et al.
ENGINEERING FRACTURE MECHANICS (2015)
Grain size effect on the small fatigue crack initiation and growth mechanisms of nickel-based superalloy GH4169
Guo-Jian Deng et al.
ENGINEERING FRACTURE MECHANICS (2015)
Influence of casting defect and SDAS on the multiaxial fatigue behaviour of A356-T6 alloy including mean stress effect
Mohamed Iben Houria et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Influence of Weld Defects and Postweld Heat Treatment of Gas Tungsten Arc-Welded AA-6061-T651 Aluminum Alloy
Mohammad W. Dewan et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Effects of mechanical heterogeneity on the tensile and fatigue behaviours in a laser-arc hybrid welded aluminium alloy joint
Chao He et al.
MATERIALS & DESIGN (2015)
Pore formation and its mitigation during hybrid laser/arc welding of advanced high strength steel
M. Mazar Atabaki et al.
MATERIALS & DESIGN (2015)
Porosity induced fatigue damage of laser welded 7075-T6 joints investigated via synchrotron X-ray microtomography
S. C. Wu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2015)
Influence of casting defects on the fatigue behavior of cast aluminum AS7G06-T6
P. Mu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
A Quantitative Model of Keyhole Instability Induced Porosity in Laser Welding of Titanium Alloy
Shengyong Pang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Quantitative visualization of a gas diffusion layer in a polymer electrolyte fuel cell using synchrotron X-ray imaging techniques
Seung Gon Kim et al.
JOURNAL OF SYNCHROTRON RADIATION (2013)
On the mechanism of porosity formation during welding of titanium alloys
Jianglin L. Huang et al.
ACTA MATERIALIA (2012)
Effects of Pore Position in Depth on Stress/Strain Concentration and Fatigue Crack Initiation
Zhiqiang Xu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Statistical assessment of fatigue crack initiation from sub-surface hydrogen micropores in high-quality die-cast aluminum
Hiroyuki Toda et al.
ACTA MATERIALIA (2011)
Numerical analysis of the effect of pore on local stresses in spot welds
Farida Bouafia et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
High cycle fatigue strength of permanent mold and rheocast aluminum 357 alloy
Myriam Brochu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Roles of microstructure in fatigue crack initiation
Kwai S. Chan
INTERNATIONAL JOURNAL OF FATIGUE (2010)
An edge-based smoothed point interpolation method (ES-PIM) for heat transfer analysis of rapid manufacturing system
S. C. Wu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)
Influence of inclusion size on S-N curve characteristics of high-strength steels in the giga-cycle fatigue regime
L. T. Lu et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)
Mean stress effects in stress-life fatigue and the Walker equation
N. E. Dowling et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)
Evolution of Slip Morphology and Fatigue Crack Initiation in Surface Grains of Ni200
K. S. Chan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Three-dimensional visualization of the interaction between fatigue crack and micropores in an aluminum alloy using synchrotron X-ray microtomography
H. Zhang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
The influence of porosity on the fatigue crack growth behavior of Ti-6Al-4V laser welds
L. W. Tsay et al.
JOURNAL OF MATERIALS SCIENCE (2006)
3D characterisation of the nucleation of a short fatigue crack at a pore in a cast Al alloy using high resolution synchrotron microtomography
E Ferrié et al.
INTERNATIONAL JOURNAL OF FATIGUE (2005)
Micro structure-based fatigue modeling of cast A356-T6 alloy
DL McDowell et al.
ENGINEERING FRACTURE MECHANICS (2003)
A finite element modelling study of strain localization in the vicinity of near-surface cavities as a cause of subsurface fatigue crack initiation
A Borbély et al.
INTERNATIONAL JOURNAL OF FRACTURE (2002)
Experimental study of porosity and its relation to fatigue mechanisms of model Al-Si7-Mg0.3 cast Al alloys
JY Buffière et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
分享论文
