相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。3D Printed Antibiotic and Chemotherapeutic Eluting Catheters for Potential Use in Interventional Radiology: In Vitro Proof of Concept Study
Jeffery A. Weisman et al.
ACADEMIC RADIOLOGY (2019)
Simultaneous Micropatterning of Fibrous Meshes and Bioinks for the Fabrication of Living Tissue Constructs
Mylene de Ruijter et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Viscoll collagen solution as a novel bioink for direct 3D bioprinting
Egor O. Osidak et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)
Fabrication of Scaffolds for Bone-Tissue Regeneration
Petra Chocholata et al.
MATERIALS (2019)
A Photo-Crosslinkable Kidney ECM-Derived Bioink Accelerates Renal Tissue Formation
Mohamed Ali et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Three-Dimensional Printed Polylactic Acid Scaffolds Promote Bone-like Matrix Deposition in Vitro
Rayan Fairag et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
The Adoption of Three-Dimensional Additive Manufacturing from Biomedical Material Design to 3D Organ Printing
Ajay Vikram Singh et al.
APPLIED SCIENCES-BASEL (2019)
Recent advances in pharmaceutical dosage forms and devices using additive manufacturing technologies
Christos I. Gioumouxouzis et al.
DRUG DISCOVERY TODAY (2019)
The design of additively manufactured lattices to increase the functionality of medical implants
Hanna E. Burton et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
3D Printed Absorber for Capturing Chemotherapy Drugs before They Spread through the Body
Hee Jeung Oh et al.
ACS CENTRAL SCIENCE (2019)
Three-Dimensional Printing of Biodegradable Piperazine-Based Polyurethane-Urea Scaffolds with Enhanced Osteogenesis for Bone Regeneration
Yufei Ma et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Homogeneous hydroxyapatite/alginate composite hydrogel promotes calcified cartilage matrix deposition with potential for three-dimensional bioprinting
Fu You et al.
BIOFABRICATION (2019)
Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments
Andrea Mazzocchi et al.
BIOFABRICATION (2019)
A definition of bioinks and their distinction from biomaterial inks
J. Groll et al.
BIOFABRICATION (2019)
3D-Printed Nanoporous Scaffolds Impregnated with Zoledronate for the Treatment of Spinal Bone Metastases
Elie Akoury et al.
MRS ADVANCES (2019)
Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets
Pamela Robles Martinez et al.
AAPS PHARMSCITECH (2018)
3D printed versus conventionally cured provisional crown and bridge dental materials
Anthony Tahayeri et al.
DENTAL MATERIALS (2018)
3D printing applications for transdermal drug delivery
Sophia N. Economidou et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
3D printed microneedles for insulin skin delivery
Cristiane Patricia Pissinato Pere et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
Muzna Sadia et al.
JOURNAL OF CONTROLLED RELEASE (2018)
3D powder printed tetracalcium phosphate scaffold with phytic acid binder: fabrication, microstructure and in situ X-Ray tomography analysis of compressive failure
Sourav Mandal et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2018)
Critical-Size Bone Defects: Is There a Consensus for Diagnosis and Treatment?
Aaron Nauth et al.
JOURNAL OF ORTHOPAEDIC TRAUMA (2018)
Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
Nayan G. Solanki et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Biofabrication: A Guide to Technology and Terminology
Lorenzo Moroni et al.
TRENDS IN BIOTECHNOLOGY (2018)
Organ-Derived Decellularized Extracellular Matrix: A Game Changer for Bioink Manufacturing?
Deepak Choudhury et al.
TRENDS IN BIOTECHNOLOGY (2018)
Prolongation of liver-specific function for primary hepatocytes maintenance in 3D printed architectures
Yohan Kim et al.
ORGANOGENESIS (2018)
Comparison of Adaptation between the Major Connectors Fabricated from Intraoral Digital Impressions and Extraoral Digital Impressions
Ning Gan et al.
SCIENTIFIC REPORTS (2018)
3D Bioprinting of Self-Standing Silk-Based Bioink
Zhaozhu Zheng et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Bioprinting Perfusion-Enabled Liver Equivalents for Advanced Organ-on-a-Chip Applications
Tobias Grix et al.
GENES (2018)
Emerging properties of hydrogels in tissue engineering
Jung-Hwan Lee et al.
JOURNAL OF TISSUE ENGINEERING (2018)
Additive Manufacturing with 3D Printing: Progress from Bench to Bedside
Ziyaur Rahman et al.
AAPS JOURNAL (2018)
Airflow-Assisted 3D Bioprinting of Human Heterogeneous Microspheroidal Organoids with Microfluidic Nozzle
Haiming Zhao et al.
SMALL (2018)
Nanoporous 3D-Printed Scaffolds for Local Doxorubicin Delivery in Bone Metastases Secondary to Prostate Cancer
Pouyan Ahangar et al.
MATERIALS (2018)
3D Bioprinted Human Skeletal Muscle Constructs for Muscle Function Restoration
Ji Hyun Kim et al.
SCIENTIFIC REPORTS (2018)
Regenerative medicine and 3D bioprinting for human space exploration and planet colonisation
Tommaso Ghidini
JOURNAL OF THORACIC DISEASE (2018)
Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering
Gabriel R. Lopez-Marcial et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Khoon S. Lim et al.
BIOFABRICATION (2018)
3D Printing-Encompassing the Facets of Dentistry
Gunpreet Oberoi et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2018)
Multimaterial 3D printing preoperative planning for frontoethmoidal meningoencephalocele surgery
Giselle Coelho et al.
CHILDS NERVOUS SYSTEM (2018)
Large volume syringe pump extruder for desktop 3D printers
Kira Pusch et al.
HARDWAREX (2018)
Applicability of 3D-dental reconstruction in cervical odontometrics
Seyedeh M. Kazzazi et al.
AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY (2018)
Assessing bioink shape fidelity to aid material development in 3D bioprinting
A. Ribeiro et al.
BIOFABRICATION (2018)
A dentin-derived hydrogel bioink for 3D bioprinting of cell laden scaffolds for regenerative dentistry
Avathamsa Athirasala et al.
BIOFABRICATION (2018)
Consistent and reproducible cultures of large-scale 3D mammary epithelial structures using an accessible bioprinting platform
John A. Reid et al.
BREAST CANCER RESEARCH (2018)
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Ryan Trombetta et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Preliminary application of a multi-level 3D printing drill guide template for pedicle screw placement in severe and rigid scoliosis
Kun Liu et al.
EUROPEAN SPINE JOURNAL (2017)
Comparison of cancer cells in 2D vs 3D culture reveals differences in AKT-mTOR-S6K signaling and drug responses
Angelika Riedl et al.
JOURNAL OF CELL SCIENCE (2017)
Fully Porous 3D Printed Titanium Femoral Stem to Reduce Stress-Shielding Following Total Hip Arthroplasty
Sajad Arabnejad et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2017)
3D Printed Surgical Instruments: The Design and Fabrication Process
Mitchell George et al.
WORLD JOURNAL OF SURGERY (2017)
Human Skin 3D Bioprinting Using Scaffold-Free Approach
Lea J. Pourchet et al.
ADVANCED HEALTHCARE MATERIALS (2017)
3D Bioprinting for Organ Regeneration
Haitao Cui et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials
Amir A. Zadpoor
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
Effects of 3D-Printed Polycaprolactone/β-Tricalcium Phosphate Membranes on Guided Bone Regeneration
Jin-Hyung Shim et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
Tablet compression tooling - Impact of punch face edge modification
Parthiban Anbalagan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Antibacterial and anti-encrustation biodegradable polymer coating for urinary catheter
Eyas Dayyoub et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
3D printing of tablets using inkjet with UV photoinitiation
Elizabeth A. Clark et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Additive Manufacturing Techniques in Prosthodontics: Where Do We Currently Stand? A Critical Review
Nawal Alharbi et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2017)
Cryogel scaffolds from patient-specific 3D-printed molds for personalized tissue-engineered bone regeneration in pediatric cleft-craniofacial defects
Katherine R. Hixon et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2017)
Progress in three-dimensional bioprinting
Adam W. Feinberg et al.
MRS BULLETIN (2017)
Self-organization process in newborn skin organoid formation inspires strategy to restore hair regeneration of adult cells
Mingxing Lei et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)
Fabrication of fillable microparticles and other complex 3D microstructures
Kevin J. McHugh et al.
SCIENCE (2017)
Comparison of 3D-Printed Poly-ε-Caprolactone Scaffolds Functionalized with Tricalcium Phosphate, Hydroxyapatite, Bio-Oss, or Decellularized Bone Matrix
Ethan Nyberg et al.
TISSUE ENGINEERING PART A (2017)
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Batzaya Byambaa et al.
ADVANCED HEALTHCARE MATERIALS (2017)
3D printed porous ceramic scaffolds for bone tissue engineering: a review
Yu Wen et al.
BIOMATERIALS SCIENCE (2017)
A 3D-Engineered Conformal Implant Releases DNA Nanocomplexs for Eradicating the Postsurgery Residual Glioblastoma
Yuan Yang et al.
ADVANCED SCIENCE (2017)
Self-assembled micro-organogels for 3D printing silicone structures
Christopher S. O'Bryan et al.
SCIENCE ADVANCES (2017)
Patient-specific 3D models aid planning for triplane proximal femoral osteotomy in slipped capital femoral epiphysis
L. Cherkasskiy et al.
JOURNAL OF CHILDRENS ORTHOPAEDICS (2017)
Individualized 3D printing navigation template for pedicle screw fixation in upper cervical spine
Fei Guo et al.
PLOS ONE (2017)
Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers
Xingliang Dai et al.
SCIENTIFIC REPORTS (2017)
3D printed scaffolds of calcium silicate-doped β-TCP synergize with co-cultured endothelial and stromal cells to promote vascularization and bone formation
Yuan Deng et al.
SCIENTIFIC REPORTS (2017)
Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction
Qin Hu et al.
SCIENTIFIC REPORTS (2017)
Fortifying the Bone-Implant Interface Part 1: An In Vitro Evaluation of 3D-Printed and TPS Porous Surfaces
Regina F. MacBarb et al.
INTERNATIONAL JOURNAL OF SPINE SURGERY (2017)
Individual variability in clinical effect and tolerability of opioid analgesics - Importance of drug interactions and pharmacogenetics
Vigdis Solhaug et al.
SCANDINAVIAN JOURNAL OF PAIN (2017)
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
James Norman et al.
ADVANCED DRUG DELIVERY REVIEWS (2017)
Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds: Effect of Nanostructure and Pore Architecture
Albert Barba et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Geometric confinement is required for recovery and maintenance of chondrocyte phenotype in alginate
Megan E. Cooke et al.
APL BIOENGINEERING (2017)
Bioprinting of a functional vascularized mouse thyroid gland construct
Elena A. Bulanova et al.
BIOFABRICATION (2017)
3D-printed scaffolds with synergistic effect of hollow-pipe structure and bioactive ions for vascularized bone regeneration
Wenjie Zhang et al.
BIOMATERIALS (2017)
Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect
Huifeng Shao et al.
BIOFABRICATION (2017)
Suspended Manufacture of Biological Structures
Samuel R. Moxon et al.
ADVANCED MATERIALS (2017)
3D-Printed Bioactive Ca3SiO5 Bone Cement Scaffolds with Nano Surface Structure for Bone Regeneration
Chen Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D bioprinting of functional human skin: production and in vivo analysis
Nieves Cubo et al.
BIOFABRICATION (2017)
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Tomasz Jungst et al.
CHEMICAL REVIEWS (2016)
Improved Surgery Planning Using 3-D Printing: a Case Study
A. J. Singhal et al.
INDIAN JOURNAL OF SURGERY (2016)
Hydrogels with tunable stress relaxation regulate stem cell fate and activity
Ovijit Chaudhuri et al.
NATURE MATERIALS (2016)
3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Xuan Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Influence of pore size of porous titanium fabricated by vacuum diffusion bonding of titanium meshes on cell penetration and bone ingrowth
Bei Chang et al.
ACTA BIOMATERIALIA (2016)
Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
Daeho Hong et al.
ACTA BIOMATERIALIA (2016)
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Yu Shrike Zhang et al.
BIOMATERIALS (2016)
Engineering Stem Cell Organoids
Xiaolei Yin et al.
CELL STEM CELL (2016)
Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants
Sophie C. Cox et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Stress shielding in periprosthetic bone following a total knee replacement: Effects of implant material, design and alignment
Qing-Hang Zhang et al.
MEDICAL ENGINEERING & PHYSICS (2016)
Mimicking biological functionality with polymers for biomedical applications
Jordan J. Green et al.
NATURE (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
Three-dimensional culture systems in cancer research: Focus on tumor spheroid model
Sritama Nath et al.
PHARMACOLOGY & THERAPEUTICS (2016)
Three-dimensional bioprinting of thick vascularized tissues
David B. Kolesky et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Barbara J. Klotz et al.
TRENDS IN BIOTECHNOLOGY (2016)
A Bioprinted Liver-on-a-Chip for Drug Screening Applications
Stephanie Knowlton et al.
TRENDS IN BIOTECHNOLOGY (2016)
Large-scale pharmacological profiling of 3D tumor models of cancer cells
Lesley A. Mathews Griner et al.
CELL DEATH & DISEASE (2016)
Bioprinting Cellularized Constructs Using a Tissue-specific Hydrogel Bioink
Aleksander Skardal et al.
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Thomas J. Hinton et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printed Surgical Instruments Evaluated by a Simulated Crew of a Mars Mission
Julielynn Y. Wong et al.
AEROSPACE MEDICINE AND HUMAN PERFORMANCE (2016)
Patient-Specific Orthopaedic Implants
Jack M. Haglin et al.
ORTHOPAEDIC SURGERY (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Thomas J. Hinton et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Research on the printability of hydrogels in 3D bioprinting
Yong He et al.
SCIENTIFIC REPORTS (2016)
Biofabrication: reappraising the definition of an evolving field
Juergen Groll et al.
BIOFABRICATION (2016)
Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Matti Kesti et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Computation of tooth axes of existent and missing teeth from 3D CT images
Yang Wang et al.
BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK (2015)
Transdermal patches: history, development and pharmacology
Michael N. Pastore et al.
BRITISH JOURNAL OF PHARMACOLOGY (2015)
Printed Three-dimensional Anatomic Templates for Virtual Preoperative Planning Before Reconstruction of Old Pelvic Injuries: Initial Results
Xin-Bao Wu et al.
CHINESE MEDICAL JOURNAL (2015)
Engraftment of Prevascularized, Tissue Engineered Constructs in a Novel Rabbit Segmental Bone Defect Model
Alexandre Kaempfen et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2015)
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration
Derek H. Rosenzweig et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2015)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Management of dose variability and side effects for individualized cancer pharmacotherapy with tyrosine kinase inhibitors
Tomohiro Terada et al.
PHARMACOLOGY & THERAPEUTICS (2015)
Reinforcement of hydrogels using three-dimensionally printed microfibres
Jetze Visser et al.
NATURE COMMUNICATIONS (2015)
Spontaneously-forming spheroids as an in vitro cancer cell model for anticancer drug screening
Maria A. Theodoraki et al.
ONCOTARGET (2015)
Computation of tooth axes of existent and missing teeth from 3D CT images
Yang Wang et al.
BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK (2015)
Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels
Thomas J. Hinton et al.
SCIENCE ADVANCES (2015)
Microneedle Coating Techniques for Transdermal Drug Delivery
Rita Haj-Ahmad et al.
PHARMACEUTICS (2015)
A biomimetic extracellular matrix for cartilage tissue engineering centered on photocurable gelatin, hyaluronic acid and chondroitin sulfate
Peter A. Levett et al.
ACTA BIOMATERIALIA (2014)
Tissue-Engineered Tracheal Reconstruction Using Three-Dimensionally Printed Artificial Tracheal Graft: Preliminary Report
Jae Won Chang et al.
ARTIFICIAL ORGANS (2014)
3D Printing of Surgical Instruments for Long-Duration Space Missions
Julielynn Y. Wong et al.
AVIATION SPACE AND ENVIRONMENTAL MEDICINE (2014)
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Niklas Sandler et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Three-dimensional printing surgical instruments: are we there yet?
Timothy M. Rankin et al.
JOURNAL OF SURGICAL RESEARCH (2014)
Organogenesis in a dish: Modeling development and disease using organoid technologies
Madeline A. Lancaster et al.
SCIENCE (2014)
Three-Dimensional Printed Multiphase Scaffolds for Regeneration of Periodontium Complex
Chang H. Lee et al.
TISSUE ENGINEERING PART A (2014)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Polycaprolactone scaffold and reduced rhBMP-7 dose for the regeneration of critical-sized defects in sheep tibiae
Amaia Cipitria et al.
BIOMATERIALS (2013)
Functional Repair of CFTR by CRISPR/Cas9 in Intestinal Stem Cell Organoids of Cystic Fibrosis Patients
Gerald Schwank et al.
CELL STEM CELL (2013)
A comparison between customized clear and removable orthodontic appliances manufactured using RP and CNC techniques
Massimo Martorelli et al.
DENTAL MATERIALS (2013)
Three-dimensional printing of stem cell-laden hydrogels submerged in a hydrophobic high-density fluid
Daniela F. Duarte Campos et al.
BIOFABRICATION (2013)
Advances in top-down and bottom-up surface nanofabrication: Techniques, applications & future prospects
Abhijit Biswas et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2012)
Alginate: Properties and biomedical applications
Kuen Yong Lee et al.
PROGRESS IN POLYMER SCIENCE (2012)
Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds
L. A. Hockaday et al.
BIOFABRICATION (2012)
Omnidirectional Printing of 3D Microvascular Networks
Willie Wu et al.
ADVANCED MATERIALS (2011)
Hybrid and biohybrid silicate based materials: molecular vs. block-assembling bottom-up processes
Eduardo Ruiz-Hitzky et al.
CHEMICAL SOCIETY REVIEWS (2011)
Cell Damage Evaluation of Thermal Inkjet Printed Chinese Hamster Ovary Cells
Xiaofeng Cui et al.
BIOTECHNOLOGY AND BIOENGINEERING (2010)
Cell encapsulation using biopolymer gels for regenerative medicine
Nicola C. Hunt et al.
BIOTECHNOLOGY LETTERS (2010)
Titanium surfaces with adherent selenium nanoclusters as a novel anticancer orthopedic material
Phong A. Tran et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2010)
Regeneration of the articular surface of the rabbit synovial joint by cell homing: a proof of concept study
Chang H. Lee et al.
LANCET (2010)
Formation and Stability of Lines Produced by Inkjet Printing
Jonathan Stringer et al.
LANGMUIR (2010)
Human microvasculature fabrication using thermal inkjet printing technology
Xiaofeng Cui et al.
BIOMATERIALS (2009)
Organ printing: Tissue spheroids as building blocks
Vladimir Mironov et al.
BIOMATERIALS (2009)
Three-dimensional bioprinting of rat embryonic neural cells
Wonhye Lee et al.
NEUROREPORT (2009)
The effect of integrin-specific bioactive coatings on tissue healing and implant osseointegration
Timothy A. Petrie et al.
BIOMATERIALS (2008)
Drop-on-demand printing of cells and materials for designer tissue constructs
Thomas Boland et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)
Hydrogels for tissue engineering: scaffold design variables and applications
JL Drury et al.
BIOMATERIALS (2003)
Alginate type and RGD density control myoblast phenotype
JA Rowley et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
The deposition, structure, pattern deposition, and activity of biomaterial thin-films by matrix-assisted pulsed-laser evaporation (MAPLE) and MAPLE direct write
PK Wu et al.
THIN SOLID FILMS (2001)