相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper
Xiaochong Lu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae
Peijian Shi et al.
NATURE COMMUNICATIONS (2019)
Significance of stacking fault energy in bulk nanostructured materials: Insights from Cu and its binary alloys as model systems
X. H. An et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Enhancing tensile properties of Cu and Cu-Al alloys cryogenically processed by high pressure torsion
Kun Xia Wei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Ductility by shear band delocalization in the nano-layer of gradient structure
Fuping Yuan et al.
MATERIALS RESEARCH LETTERS (2019)
Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures
C. E. Slone et al.
ACTA MATERIALIA (2019)
Fracture behavior of heterogeneous nanostructured 316L austenitic stainless steel with nanotwin bundles
L. Xiong et al.
ACTA MATERIALIA (2018)
High-order hierarchical nanotwins with superior strength and ductility
Xiaowei Liu et al.
ACTA MATERIALIA (2018)
Mechanical properties and optimal grain size distribution profile of gradient grained nickel
Y. Lin et al.
ACTA MATERIALIA (2018)
Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures
Yan Ma et al.
ACTA MATERIALIA (2018)
Twinning-induced plasticity (TWIP) steels
Bruno C. De Cooman et al.
ACTA MATERIALIA (2018)
Improved back stress and synergetic strain hardening in coarse-grain/nanostructure laminates
Yanfei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Interface affected zone for optimal strength and ductility in heterogeneous laminate
C. X. Huang et al.
MATERIALS TODAY (2018)
Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength
Muxin Yang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)
Review on superior strength and enhanced ductility of metallic nanomaterials
I. A. Ovid'ko et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Abnormal grain coarsening in cyclically deformed gradient nanograined Cu
J. Z. Long et al.
SCRIPTA MATERIALIA (2018)
Extraordinary Bauschinger effect in gradient structured copper
Xiaolong Liu et al.
SCRIPTA MATERIALIA (2018)
Nanotwinned and hierarchical nanotwinned metals: a review of experimental, computational and theoretical efforts
Ligang Sun et al.
NPJ COMPUTATIONAL MATERIALS (2018)
Structural evolutions of metallic materials processed by severe plastic deformation
Yang Cao et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys
Yao-Jian Liang et al.
NATURE COMMUNICATIONS (2018)
Extra strengthening and work hardening in gradient nanotwinned metals
Zhao Cheng et al.
SCIENCE (2018)
Hierarchical features infused heterogeneous grain structure for extraordinary strength-ductility synergy
Shivakant Shukla et al.
MATERIALS RESEARCH LETTERS (2018)
A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength
Zhiqiang Fu et al.
SCIENCE ADVANCES (2018)
On strain hardening mechanism in gradient nanostructures
Jianjun Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Shock and spall behaviors of a high specific strength steel: Effects of impact stress and microstructure
Wei Wang et al.
JOURNAL OF APPLIED PHYSICS (2017)
Deformation mechanisms for superplastic behaviors in a dual-phase high specific strength steel with ultrafine grains
Wei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Mechanical properties and deformation mechanism of Mg-Al-Zn alloy with gradient microstructure in grain size and orientation
Liu Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals
Evan Ma et al.
MATERIALS TODAY (2017)
The Evolution of Strain Gradient and Anisotropy in Gradient-Structured Metal
Xiangde Bian et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
History-independent cyclic response of nanotwinned metals
Qingsong Pan et al.
NATURE (2017)
Dual-phase nanostructuring as a route to high-strength magnesium alloys
Ge Wu et al.
NATURE (2017)
High dislocation density-induced large ductility in deformed and partitioned steels
B. B. He et al.
SCIENCE (2017)
Bone-like crack resistance in hierarchical metastable nanolaminate steels
Motomichi Koyama et al.
SCIENCE (2017)
Fracture behavior of an austenitic stainless steel with nanoscale deformation twins
L. Xiong et al.
SCRIPTA MATERIALIA (2017)
Intrinsic fracture toughness of bulk nanostructured Cu with nanoscale deformation twins
S. S. Luo et al.
SCRIPTA MATERIALIA (2017)
A study of dynamic plasticity in austenite stainless steels with a gradient distribution of nanoscale twins
Linli Zhu et al.
SCRIPTA MATERIALIA (2017)
Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing
Shuhei Yoshida et al.
SCRIPTA MATERIALIA (2017)
The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys
Y. H. Zhang et al.
SCRIPTA MATERIALIA (2017)
Plastic deformation mechanisms in a severely deformed Fe-Ni-Al-C alloy with superior tensile properties
Yan Ma et al.
SCIENTIFIC REPORTS (2017)
Gradient structure produces superior dynamic shear properties
Xiangde Bian et al.
MATERIALS RESEARCH LETTERS (2017)
Heterogeneous materials: a new class of materials with unprecedented mechanical properties
Xiaolei Wu et al.
MATERIALS RESEARCH LETTERS (2017)
High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure
Z. Li et al.
SCIENTIFIC REPORTS (2017)
Optimal stress and deformation partition in gradient materials for better strength and tensile ductility: A numerical investigation
Yao Wang et al.
SCIENTIFIC REPORTS (2017)
Size effects of lamellar twins on the strength and deformation mechanisms of nanocrystalline hcp cobalt
Wen Wang et al.
SCIENTIFIC REPORTS (2017)
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy
J. Miao et al.
ACTA MATERIALIA (2017)
Fundamentals of Superior Properties in Bulk NanoSPD Materials
R. Z. Valiev et al.
MATERIALS RESEARCH LETTERS (2016)
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
G. Laplanche et al.
ACTA MATERIALIA (2016)
Strain hardening in Fe-16Mn-10Al-0.86C-5Ni high specific strength steel
M. X. Yang et al.
ACTA MATERIALIA (2016)
Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility
X. L. Wu et al.
ACTA MATERIALIA (2016)
Strain hardening behaviors and strain rate sensitivity of gradient-grained Fe under compression over a wide range of strain rates
Fuping Yuan et al.
MECHANICS OF MATERIALS (2016)
Back stress strengthening and strain hardening in gradient structure
Muxin Yang et al.
MATERIALS RESEARCH LETTERS (2016)
Stabilizing nanostructures in metals using grain and twin boundary architectures
K. Lu
NATURE REVIEWS MATERIALS (2016)
Strength gradient enhances fatigue resistance of steels
Zhiwei Ma et al.
SCIENTIFIC REPORTS (2016)
Gradient plasticity in gradient nano-grained metals
Zhi Zeng et al.
EXTREME MECHANICS LETTERS (2016)
Role of the misfit stress between grains in the Bauschinger effect for a polycrystalline material
B. Chen et al.
ACTA MATERIALIA (2015)
Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel
Z. Y. Liang et al.
ACTA MATERIALIA (2015)
Fracture in a thin film of nanotwinned copper
Zhi Zeng et al.
ACTA MATERIALIA (2015)
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
H. W. Huang et al.
ACTA MATERIALIA (2015)
Nanolaminate transformation-induced plasticity-twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance
M. -M. Wang et al.
ACTA MATERIALIA (2015)
Effect of Strain Rate on Tensile Ductility and Fracture Behavior of Bulk Nanotwinned Copper
Zesheng You et al.
ADVANCED ENGINEERING MATERIALS (2015)
Size effect and atomistic deformation mechanisms of hierarchically nanotwinned fcc metals under nanoindentation
Fuping Yuan et al.
JOURNAL OF MATERIALS SCIENCE (2015)
Size effect and boundary type on the strengthening of nanoscale domains in pure nickel
Fuping Yuan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
A physical model revealing strong strain hardening in nano-grained metals induced by grain size gradient structure
Jianjun Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Atomistic simulation study on twin orientation and spacing distribution effects on nanotwinned Cu films
Ligang Sun et al.
PHILOSOPHICAL MAGAZINE (2015)
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Xiaolei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Unloading yield effect in a twin-roll-cast Mg-3Al-1Zn alloy
J. Geng et al.
SCRIPTA MATERIALIA (2015)
Atomistic tensile deformation mechanisms of Fe with gradient nano-grained structure
Wenbin Li et al.
AIP ADVANCES (2015)
Nanodomained Nickel Unite Nanocrystal Strength with Coarse-Grain Ductility
Xiaolei Wu et al.
SCIENTIFIC REPORTS (2015)
Determination of bulk flow properties of a material from the flow properties of its constituent phases
Surajit Kumar Paul et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Twin boundary spacing effects on shock response and spall behaviors of hierarchically nanotwinned fcc metals
Fuping Yuan et al.
JOURNAL OF APPLIED PHYSICS (2014)
Varying tensile fracture mechanisms of Cu and Cu-Zn alloys with reduced grain size: From necking to shearing instability
P. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel
Kyosun Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Deformation and failure mechanisms of nanotwinned copper films with a pre-existing crack
L. G. Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Extraordinary strain hardening by gradient structure
XiaoLei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
Making strong nanomaterials ductile with gradients
K. Lu
SCIENCE (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
Tension-induced softening and hardening in gradient nanograined surface layer in copper
T. H. Fang et al.
SCRIPTA MATERIALIA (2014)
Evading the strength- ductility trade-off dilemma in steel through gradient hierarchical nanotwins
Yujie Wei et al.
NATURE COMMUNICATIONS (2014)
Synergetic Strengthening by Gradient Structure
X. L. Wu et al.
MATERIALS RESEARCH LETTERS (2014)
Fatigue behavior of columnar-grained Cu with preferentially oriented nano scale twins
Q. S. Pan et al.
ACTA MATERIALIA (2013)
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
Terence G. Langdon
ACTA MATERIALIA (2013)
High-pressure torsion of TiFe intermetallics for activation of hydrogen storage at room temperature with heterogeneous nanostructure
Kaveh Edalati et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
Size effects of primary/secondary twins on the atomistic deformation mechanisms in hierarchically nanotwinned metals
Fuping Yuan et al.
JOURNAL OF APPLIED PHYSICS (2013)
Formation sequences and roles of multiple deformation twins during the plastic deformation in nanocrystalline fcc metals
Fuping Yuan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility
G. Liu et al.
NATURE MATERIALS (2013)
Enhancing torsion fatigue behaviour of a martensitic stainless steel by generating gradient nanograined layer via surface mechanical grinding treatment
H. W. Huang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2013)
Atomistic scale fracture behaviours in hierarchically nanotwinned metals
Fuping Yuan et al.
PHILOSOPHICAL MAGAZINE (2013)
Strain-Induced Ultrahard and Ultrastable Nanolaminated Structure in Nickel
X. C. Liu et al.
SCIENCE (2013)
Grain size gradient length scale in ballistic properties optimization of functionally graded nanocrystalline steel plates
Antoine Jerusalem et al.
SCRIPTA MATERIALIA (2013)
In situ observations of crack arrest and bridging by nanoscale twins in copper thin films
Seong-Woong Kim et al.
ACTA MATERIALIA (2012)
Analysis of spherical indentation of materials with plastically graded surface layer
Fuping Yuan et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Shock response of nanotwinned copper from large-scale molecular dynamics simulations
Fuping Yuan et al.
PHYSICAL REVIEW B (2012)
Deformation twinning in nanocrystalline materials
Y. T. Zhu et al.
PROGRESS IN MATERIALS SCIENCE (2012)
A unified mechanistic model for size-dependent deformation in nanocrystalline and nanotwinned metals
Pei Gu et al.
ACTA MATERIALIA (2011)
Effects of stacking fault energy, strain rate and temperature on microstructure and strength of nano structured Cu-Al alloys subjected to plastic deformation
Y. Zhang et al.
ACTA MATERIALIA (2011)
Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging
Marion Calcagnotto et al.
ACTA MATERIALIA (2011)
Heterogeneous nanostructured electrode materials for electrochemical energy storage
Ran Liu et al.
CHEMICAL COMMUNICATIONS (2011)
Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper
T. H. Fang et al.
SCIENCE (2011)
Strength-ductility combination of nanostructured Cu-Zn alloy with nanotwin bundles
G. H. Xiao et al.
SCRIPTA MATERIALIA (2011)
Dislocation nucleation governed softening and maximum strength in nano-twinned metals
Xiaoyan Li et al.
NATURE (2010)
Stress relaxation and the structure size-dependence of plastic deformation in nanotwinned copper
Lei Lu et al.
ACTA MATERIALIA (2009)
Effect of the Zener-Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation
Y. S. Li et al.
ACTA MATERIALIA (2009)
Microstructural evolution and mechanical properties of Cu-Al alloys subjected to equal channel angular pressing
S. Qu et al.
ACTA MATERIALIA (2009)
A new criterion for elasto-plastic transition in nanomaterials: Application to size and composite effects on Cu-Nb nanocomposite wires
Ludovic Thilly et al.
ACTA MATERIALIA (2009)
Work hardening mechanism in high nitrogen austenitic steel studied by in situ neutron diffraction and in situ electron backscattering diffraction
M. Ojima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
K. Lu et al.
SCIENCE (2009)
Revealing the Maximum Strength in Nanotwinned Copper
L. Lu et al.
SCIENCE (2009)
Nanoprecipitate-hardened 1.5 GPa steels with unexpected high ductility
D. Raabe et al.
SCRIPTA MATERIALIA (2009)
Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures
Y. S. Li et al.
ACTA MATERIALIA (2008)
High tensile ductility and strength in bulk nanostructured nickel
Yonghao Zhao et al.
ADVANCED MATERIALS (2008)
Dynamical dislocation emission processes from twin boundaries
Y. B. Wang et al.
APPLIED PHYSICS LETTERS (2008)
The transition from stiff to compliant materials in squid beaks
Ali Miserez et al.
SCIENCE (2008)
Make nanostructured metal exceptionally tough by introducing non-localized fracture behaviors
Ai-Ying Chen et al.
SCRIPTA MATERIALIA (2008)
Effect of thermal annealing on mechanical properties of a nanostructured copper prepared by means of dynamic plastic deformation
Y. S. Li et al.
SCRIPTA MATERIALIA (2008)
Fabrication of a gradient nano-micro-structured surface layer on bulk copper by means of a surface mechanical grinding treatment
W. L. Li et al.
SCRIPTA MATERIALIA (2008)
Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels
O. Bouaziz et al.
SCRIPTA MATERIALIA (2008)
Low-temperature nitriding of 38CrMoAl steel with a nanostructured surface layer induced by surface mechanical attrition treatment
W. P. Tong et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Strain rate effects in the ultrafine grain and nanocrystalline regimes-influence on some constitutive responses
Q. Wei
JOURNAL OF MATERIALS SCIENCE (2007)
Nanostructured-coatings of glass fibers:: Improvement of alkali resistance and mechanical properties
S. L. Gao et al.
ACTA MATERIALIA (2007)
Strength, strain-rate sensitivity and ductility of copper with nanoscale twins
M. Dao et al.
ACTA MATERIALIA (2006)
Strain rate sensitivity of Cu with nanoscale twins
Y. F. Shen et al.
SCRIPTA MATERIALIA (2006)
Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment
T Roland et al.
SCRIPTA MATERIALIA (2006)
Temperature-dependent strain rate sensitivity and activation volume of nanocrystalline Ni
Y. M. Wang et al.
ACTA MATERIALIA (2006)
Mechanical properties of nanocrystalline materials
MA Meyers et al.
PROGRESS IN MATERIALS SCIENCE (2006)
High-strength sputter-deposited Cu foils with preferred orientation of nanoscale growth twins
X Zhang et al.
APPLIED PHYSICS LETTERS (2006)
Tensile properties of copper with nano-scale twins
YF Shen et al.
SCRIPTA MATERIALIA (2005)
Nano-sized twins induce high rate sensitivity of flow stress in pure copper
L Lu et al.
ACTA MATERIALIA (2005)
Ultrahigh strength and high electrical conductivity in copper
L Lu et al.
SCIENCE (2004)
Three strategies to achieve uniform tensile deformation in a nanostructured metal
YM Wang et al.
ACTA MATERIALIA (2004)
Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals
Q Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructuring of metals by severe plastic deformation for advanced properties
R Valiev
NATURE MATERIALS (2004)
On the current understanding of strain gradient plasticity
H Mughrabi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel
R Schwaiger et al.
ACTA MATERIALIA (2003)
In situ neutron diffraction study of IF and ultra low carbon steels upon tensile deformation
Y Tomota et al.
ACTA MATERIALIA (2003)
Nitriding iron at lower temperatures
WP Tong et al.
SCIENCE (2003)
High tensile ductility in a nanostructured metal
YM Wang et al.
NATURE (2002)
Paradox of strength and ductility in metals processed by severe plastic deformation
RZ Valiev et al.
JOURNAL OF MATERIALS RESEARCH (2002)
Modelling of TWIP effect on work-hardening
O Bouaziz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Influence of nucleation and growth phenomena on microstructural evolution during droplet-based deposition
Q Xu et al.
ACTA MATERIALIA (2001)
Graded materials for resistance to contact deformation and damage
S Suresh
SCIENCE (2001)
A new view on transformation induced plasticity (TRIP)
FD Fischer et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2000)
分享论文
