相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Aerodynamics Effect of Holes in UAV Wings Modified for VTOL Capability
Laith S. Sawaqed et al.
DRONE SYSTEMS AND APPLICATIONS (2022)
Preliminary Investigation of Building Strategies of Maraging Steel Bulk Material Using Wire plus Arc Additive Manufacture
Xiangfang Xu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Influence of Shielding Gas Composition on Structure and Mechanical Properties of Wire and Arc Additive Manufactured Inconel 625
Ivan Juric et al.
JOM (2019)
Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges
C. Buchanan et al.
ENGINEERING STRUCTURES (2019)
Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire plus arc additive manufacture process
Xiangfang Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel
Leilei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Quality monitoring in wire-arc additive manufacturing based on cooperative awareness of spectrum and vision
Zhuang Zhao et al.
OPTIK (2019)
Study on microstructure and tensile properties of high nitrogen Cr-Mn steel processed by CMT wire and arc additive manufacturing
Xiaoyong Zhang et al.
MATERIALS & DESIGN (2019)
Effect of titanium powder on microstructure and mechanical properties of wire plus arc additively manufactured Al-Mg alloy
Liwei Wang et al.
MATERIALS LETTERS (2019)
Introduction to the design rules for Metal Big Area Additive Manufacturing
Clayton Greer et al.
ADDITIVE MANUFACTURING (2019)
Wire and arc additive manufacturing of HSLA steel: Effect of thermal cycles on microstructure and mechanical properties
Tiago A. Rodrigues et al.
ADDITIVE MANUFACTURING (2019)
Microstructure and mechanical properties of gas tungsten arc welded Cu-Al-Mn shape memory alloy rods
J. P. Oliveira et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Optimization strategies for robotic additive and subtractive manufacturing of large and high thin-walled aluminum structures
Guocai Ma et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effect of in-process active cooling on forming quality and efficiency of tandem GMAW-based additive manufacturing
Junbiao Shi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Improving mechanical properties of wire plus arc additively manufactured maraging steel through plastic deformation enhanced aging response
Xiangfang Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Reducing arc heat input and obtaining equiaxed grains by hot-wire method during arc additive manufacturing titanium alloy
Zixiang Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Tandem metal inert gas process for high productivity wire arc additive manufacturing in stainless steel
Filomeno Martina et al.
ADDITIVE MANUFACTURING (2019)
Understanding and overcoming of abnormity at start and end of the weld bead in additive manufacturing with GMAW
Zeqi Hu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Microstructural evolution and mechanical properties of maraging steel produced by wire plus arc additive manufacture process
Xiangfang Xu et al.
MATERIALS CHARACTERIZATION (2018)
Effect of process parameters on the quality of aluminium alloy Al5Si deposits in wire and arc additive manufacturing using a cold metal transfer process
A. Gomez Ortega et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2018)
Evaluation of wire arc additive manufacturing for large-sized components in naval applications
A. Queguineur et al.
WELDING IN THE WORLD (2018)
Influences of postproduction heat treatment on Fe3Al-based iron aluminide fabricated using the wire-arc additive manufacturing process
Chen Shen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts
Fangda Xu et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2018)
Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing
Xingwang Bai et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Trace Carbon Addition to Refine Microstructure and Enhance Properties of Additive-Manufactured Ti-6Al-4V
S. Mereddy et al.
JOM (2018)
Optimising the mechanical properties of Ti-6Al-4V components produced by wire plus arc additive manufacturing with post-process heat treatments
M. J. Bermingham et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Characterization of wire arc additive manufacturing 2Cr13 part: Process stability, microstructural evolution, and tensile properties
Jinguo Ge et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening
Rujian Sun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Characterization of a functionally graded material of Ti-6Al-4V to 304L stainless steel with an intermediate V section
Lourdes D. Bobbio et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy
Bintao Wu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Additive manufacturing using WAAM with AA5183 wire
A. Horgar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Oxide accumulation effects on wire plus arc layer-by-layer additive manufacture process
Xiangfang Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Microstructure and mechanical properties of double-wire plus arc additively manufactured Al-Cu-Mg alloys
Zewu Qi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Deformation microstructures and strengthening mechanisms for the wire plus arc additively manufactured Al-Mg4.5Mn alloy with inter-layer rolling
Jianglong Gu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Wire arc additive manufacturing of Al-6Mg alloy using variable polarity cold metal transfer arc as power source
Chen Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Formation and improvement of surface waviness for additive manufacturing 5A06 aluminium alloy component with GTAW system
Haibin Geng et al.
RAPID PROTOTYPING JOURNAL (2018)
Effects of laser processing on the transformation characteristics of NiTi: A contribute to additive manufacturing
J. P. Oliveira et al.
SCRIPTA MATERIALIA (2018)
Microstructure and properties of die steel fabricated by WAAM using H13 wire
Tingting Wang et al.
VACUUM (2018)
Research on Mechanisms and Controlling Methods of Macro Defects in TC4 Alloy Fabricated by Wire Additive Manufacturing
Lei Ji et al.
MATERIALS (2018)
Thermoelectric Cooling-Aided Bead Geometry Regulation in Wire and Arc-Based Additive Manufacturing of Thin-Walled Structures
Fang Li et al.
APPLIED SCIENCES-BASEL (2018)
Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling
J. R. Honnige et al.
MATERIALS & DESIGN (2018)
Fusion zone geometries, cooling rates and solidification parameters during wire arc additive manufacturing
W. Ou et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
The influence of build parameters and wire batch on porosity of wire and arc additive manufactured aluminium alloy 2319
E. M. Ryan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Properties of wire plus arc additively manufactured 2024 aluminum alloy with different solution treatment temperature
Zewu Qi et al.
MATERIALS LETTERS (2018)
Optimization of AZ91D Process and Corrosion Resistance Using Wire Arc Additive Manufacturing
Seungkyu Han et al.
APPLIED SCIENCES-BASEL (2018)
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
Bintao Wu et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Residual Stress, Mechanical Properties, and Grain Morphology of Ti-6Al-4V Alloy Produced by Ultrasonic Impact Treatment Assisted Wire and Arc Additive Manufacturing
Yichong Yang et al.
METALS (2018)
Enhancing mechanical properties of wire plus arc additively manufactured INCONEL 718 superalloy through in-process thermo mechanical processing
Xiangfang Xu et al.
MATERIALS & DESIGN (2018)
Idle time selection for wire-arc additive manufacturing: A finite element-based technique
Filippo Montevecchi et al.
ADDITIVE MANUFACTURING (2018)
Effects of heat accumulation on microstructure and mechanical properties of Ti6Al4V alloy deposited by wire arc additive manufacturing
Bintao Wu et al.
ADDITIVE MANUFACTURING (2018)
Material-property evaluation of magnesium alloys fabricated using wire-and-arc-based additive manufacturing
Hisataka Takagi et al.
ADDITIVE MANUFACTURING (2018)
The influence of post-production heat treatment on the multi-directional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process
Chen Shen et al.
ADDITIVE MANUFACTURING (2018)
Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement
Anthony R. McAndrew et al.
ADDITIVE MANUFACTURING (2018)
Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing
Ana Lopez et al.
ADDITIVE MANUFACTURING (2018)
Control of residual stress and distortion in aluminium wire plus arc additive manufacture with rolling
J. R. Honnige et al.
ADDITIVE MANUFACTURING (2018)
Microstructure characterization of SS308LSi components manufactured by GTAW-based additive manufacturing: shaped metal deposition using pulsed current arc
Oguzhan Yilmaz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Optimisation of interpass temperature and heat input for wire and arc additive manufacturing 5A06 aluminium alloy
Haibin Geng et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2017)
A Passive Imaging System for Geometry Measurement for the Plasma Arc Welding Process
Tomas Font Comas et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)
Grain refinement of wire arc additively manufactured titanium by the addition of silicon
S. Mereddy et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Design for Wire plus Arc Additive Manufacture: design rules and build orientation selection
Helen Lockett et al.
JOURNAL OF ENGINEERING DESIGN (2017)
Optimization of wire feed for GTAW based additive manufacturing
Haibin Geng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Thermal analysis for single-pass multi-layer GMAW based additive manufacturing using infrared thermography
Dongqing Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V
Bintao Wu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Design for additive manufacturing with site-specific properties in metals and alloys
S. Tammas-Williams et al.
SCRIPTA MATERIALIA (2017)
Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components
Paul A. Colegrove et al.
SCRIPTA MATERIALIA (2017)
Studies on Dissimilar Twin-Wire Weld-Deposition for Additive Manufacturing Applications
M. A. Somashekara et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2017)
Functional fatigue behavior of NiTi-Cu dissimilar laser welds
Zhi Zeng et al.
MATERIALS & DESIGN (2017)
Dissimilar laser welding of superelastic NiTi and CuAlMn shape memory alloys
J. P. Oliveira et al.
MATERIALS & DESIGN (2017)
Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing
Hui Xiao et al.
MATERIALS & DESIGN (2017)
Design and integration of WAAM technology and in situ monitoring system in a gantry machine
T. Artaza et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)
Slicer and process improvements for open-source GMAW-based metal 3-D printing
Yuenyong Nilsiam et al.
ADDITIVE MANUFACTURING (2017)
Preliminary development of a Wire and Arc Additive Manufacturing system (WAAM)
J. L. Prado-Cerqueira et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)
Finite element analysis and experimental validation of thermal behavior for thin-walled parts in GMAW-based additive manufacturing with various substrate preheating temperatures
Jun Xiong et al.
APPLIED THERMAL ENGINEERING (2017)
Wire and arc additive manufactured steel: Tensile and wear properties
C. Haden et al.
ADDITIVE MANUFACTURING (2017)
Improvement of Microstructure and Mechanical Properties in Wire plus Arc Additively Manufactured Ti-6Al-4V with Machine Hammer Peening
Jan Roman Honnige et al.
ICMAT 2017 SYMPOSIUM (M TO Z) (2017)
Additive manufacturing using plasma transferred arc
E. A. Alberti et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-Arc Additive Manufacturing Process
Chen Shen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2016)
Laser joining of NiTi to Ti6Al4V using a Niobium interlayer
J. P. Oliveira et al.
ACTA MATERIALIA (2016)
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Mary Kathryn Thompson et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part
Donghong Ding et al.
COMPUTER-AIDED DESIGN (2016)
Recent advances in grain refinement of light metals and alloys
M. A. Easton et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2016)
Improvement in Geometrical Accuracy and Mechanical Property for Arc-Based Additive Manufacturing Using Metamorphic Rolling Mechanism
Yang Xie et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Influence of shielding gas on undercutting formation in gas metal arc welding
Ran Zong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing
Jun Xiong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys
Jianglong Gu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Effect of laser welding parameters on the austenite and martensite phase fractions of NiTi
J. P. Oliveira et al.
MATERIALS CHARACTERIZATION (2016)
The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on β-grain refinement and texture modification in Ti-6Al-4V
J. Donoghue et al.
MATERIALS CHARACTERIZATION (2016)
Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding
J. F. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al-6.3Cu alloy
Jianglong Gu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Residual stress of as-deposited and rolled wire plus arc additive manufacturing Ti-6Al-4V components
F. Martina et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Wire plus Arc Additive Manufacturing
S. W. Williams et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys
Y. Ding et al.
MRS BULLETIN (2016)
Additive manufacturing of Ni-based superalloys: The outstanding issues
Moataz M. Attallah et al.
MRS BULLETIN (2016)
Dissimilar metal deposition with a stainless steel and nickel-based alloy using wire and arc-based additive manufacturing
Takeyuki Abe et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)
Tungsten inert gas (TIG) welding of Ni-rich NiTi plates: functional behavior
J. P. Oliveira et al.
SMART MATERIALS AND STRUCTURES (2016)
Wire Arc Additive Manufacturing of AZ31 Magnesium Alloy: Grain Refinement by Adjusting Pulse Frequency
Jing Guo et al.
MATERIALS (2016)
Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing
Donghong Ding et al.
Materials (2016)
Residual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffraction
J. P. Oliveira et al.
MATERIALS & DESIGN (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
Optimization of WAAM deposition patterns for T-crossing features
Giuseppe Venturini et al.
5TH CIRP GLOBAL WEB CONFERENCE - RESEARCH AND INNOVATION FOR FUTURE PRODUCTION (CIRPE 2016) (2016)
Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions
M. J. Bermingham et al.
ACTA MATERIALIA (2015)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
Fiber laser welding of NiTi to Ti-6Al-4V
R. M. Miranda et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
Donghong Ding et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Electrically assisted friction stir welding for joining Al 6061 to TRIP 780 steel
Xun Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing
Amberlee S. Haselhubn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Development of a laminar flow local shielding device for wire plus arc additive manufacture
J. Ding et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
Erik R. Denlinger et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Microstructure of Interpass Rolled Wire plus Arc Additive Manufacturing Ti-6Al-4V Components
Filomeno Martina et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)
Donghong Ding et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2015)
A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures
Donghong Ding et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2015)
Dissimilar laser welding of NiTi shape memory alloy and copper
Z. Zeng et al.
SMART MATERIALS AND STRUCTURES (2015)
Transgranular liquation cracking of grains in the semi-solid state
S. Karagadde et al.
NATURE COMMUNICATIONS (2015)
Modeling of the moving induction heating used as secondary heat source in weld-based additive manufacturing
Xingwang Bai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3% Cu alloy
Baoqiang Cong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Designing a WAAM Based Manufacturing System for Defence Applications
Alessandro Busachi et al.
CIRPE 2015 - UNDERSTANDING THE LIFE CYCLE IMPLICATIONS OF MANUFACTURING (2015)
A tool-path generation strategy for wire and arc additive manufacturing
Donghong Ding et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
The effect of post-weld heat treatment temperature on the microstructure of Inconel 625 deposited metal
Xixue Xing et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Development of micro-plasma transferred arc (μ-PTA) wire deposition process for additive layer manufacturing applications
Suyog Jhavar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Modeling and characterization of as-welded microstructure of solid solution strengthened Ni-Cr-Fe alloys resistant to ductility-dip cracking Part II: Microstructure characterization
Jimy Unfried-Silgado et al.
METALS AND MATERIALS INTERNATIONAL (2014)
NUsability of arc types in industrial welding
Paul Kah et al.
INTERNATIONAL JOURNAL OF MECHANICAL AND MATERIALS ENGINEERING (2014)
Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling
Paul A. Colegrove et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision
Jun Xiong et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2013)
Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Fude Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Thermal Imaging for Assessment of Electron-Beam Freeform Fabrication (EBF3) Additive Manufacturing Deposits
Joseph N. Zalameda et al.
THERMOSENSE: THERMAL INFRARED APPLICATIONS XXXV (2013)
Three-dimensional finite element analysis of thermal stress in single-pass multi-layer weld-based rapid prototyping
Huihui Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti-6Al-4V
F. Martina et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Fabrication of geometrical features using wire and arc additive manufacture
Panagiotis Kazanas et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Morphology investigation on direct current pulsed gas tungsten arc welded additive layer manufactured Ti6Al4V alloy
Fude Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Monitoring Gas Metal Arc Welding Process by Using Audible Sound Signal
Jozef Horvat et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2011)
Finite element modeling of multi-pass welding and shaped metal deposition processes
Michele Chiumenti et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)
Low cost integration of additive and subtractive processes for hybrid layered manufacturing
K. P. Karunakaran et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2010)
Grain-refinement mechanisms in titanium alloys
M. J. Bermingham et al.
JOURNAL OF MATERIALS RESEARCH (2008)
Deformation modelling in layered manufacturing of metallic parts using gas metal arc welding: effect of process parameters
MP Mughal et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2005)
Rapid prototyping of 4043 Al-alloy parts by VP-GTAW
HJ Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Microstructure and texture evolution during solidification processing of Ti-6Al-4V
PA Kobryn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Weld deposition-based rapid prototyping: a preliminary study
YM Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
The development of a layer based machining system
YH Chen et al.
COMPUTER-AIDED DESIGN (2001)
Overview -: Residual stress part 1 -: Measurement techniques
PJ Withers et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
分享论文
