相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Epitaxial growth and oxidation behavior of an overlay coating on a Ni-base single-crystal superalloy by laser cladding
Jingjing Liang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
In-situ comparison of deformation behavior at 23 °C and 650 °C of laser direct melting deposited Ti-6Al-4V alloy
Jin Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Prospects for using T-splines for the development of the STEP-NC-based manufacturing of freeform surfaces
Gang Zhao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Direct laser metal deposition of Inconel 738
A. Ramakrishnan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Laser assisted direct energy deposition of Hastelloy-X
A. N. Jinoop et al.
OPTICS AND LASER TECHNOLOGY (2019)
Laser annealing of laser additive-manufactured Ni-Ti structures: An experimental-numerical investigation
S. Shiva et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2018)
Controlling metal structure with remelting process in direct energy deposition of Inconel 625
Ryo Koike et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming
Y. L. Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Laser Cladding-Based Metallic Embedding Technique for Fiber Optic Sensors
Tania Grandal et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2018)
Thermal and microstructural analysis of laser-based directed energy deposition for Ti-6Al-4V and Inconel 625 deposits
Frederick Lia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Study of the Influence of Shielding Gases on Laser Metal Deposition of Inconel 718 Superalloy
Jose Exequiel Ruiz et al.
MATERIALS (2018)
Additive manufacturing of Inconel 718-Copper alloy bimetallic structure using laser engineered net shaping (LENS™)
Bonny Onuike et al.
ADDITIVE MANUFACTURING (2018)
In-process height control during laser metal deposition based on structured light 3D scanning
Iker Garmendia et al.
19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)
Additive manufacturing of Inconel 718-Ti6Al4V bimetallic structures
Bonny Onuike et al.
ADDITIVE MANUFACTURING (2018)
Systematic evaluation of process parameter maps for laser cladding and directed energy deposition
Benjamin Bax et al.
ADDITIVE MANUFACTURING (2018)
Additive Manufacturing of AlSi10Mg Alloy Using Direct Energy Deposition: Microstructure and Hardness Characterization
M. Javidani et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Effect of directed energy deposition processing parameters on laser deposited Inconel® 718: External morphology
David J. Corbin et al.
JOURNAL OF LASER APPLICATIONS (2017)
Effect of Heat Treatment Parameters on the Microstructure and Properties of Inconel-625 Superalloy
Arjun Sukumaran et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Improved high-temperature hardness and wear resistance of Inconel 625 coatings fabricated by laser cladding
Kai Feng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Effects of laser modes on Nb segregation and Laves phase formation during laser additive manufacturing of nickel-based superalloy
H. Xiao et al.
MATERIALS LETTERS (2017)
The tensile deformation behavior of laser repaired Inconel 718 with a non-uniform microstructure
Shang Sui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The effect of preheating on microstructure and mechanical properties of laser solid forming IN-738LC alloy
Jianjun Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718
Shang Sui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Crystallographic texture in an additively manufactured nickel -base superalloy
Dong Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Melt-pool motion, temperature variation and dendritic morphology of Inconel 718 during pulsed-and continuous-wave laser additive manufacturing: A comparative study
Simeng Li et al.
MATERIALS & DESIGN (2017)
Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing
Hui Xiao et al.
MATERIALS & DESIGN (2017)
Study on factors for pores and cladding shape in the deposition processes of Inconel 625 by the directed energy deposition (DED) method
Makoto Fujishima et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2017)
Ultrasonic Vibration-Assisted Laser Engineered Net Shaping of Inconel 718 Parts: A Feasibility Study
Fuda Ning et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling
Beth E. Carroll et al.
ACTA MATERIALIA (2016)
Processing window development for laser cladding of zirconium on zirconium alloy
Arshad Harooni et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Segregation of niobium in laser cladding Inconel 718 superalloy
Yi-tong Long et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition
Chongliang Zhong et al.
MATERIALS & DESIGN (2016)
Microstructure and mechanical properties of Inconel 625/nano-TiB2 composite fabricated by LAAM
Baicheng Zhang et al.
MATERIALS & DESIGN (2016)
Cracking behavior and control of Rene 104 superalloy produced by direct laser fabrication
Jingjing Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: Tailored microstructures and enhanced performance
Chen Hong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Cobalt-Free Laser Cladding on AISI Type 316L Stainless Steel for Improved Cavitation and Slurry Erosion Wear Behavior
C. P. Paul et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing
Guijun Bi et al.
MATERIALS & DESIGN (2014)
Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition
Kamran Shah et al.
MATERIALS & DESIGN (2014)
Evaluation of fracture toughness and impact toughness of laser rapid manufactured Inconel-625 structures and their co-relation
Ganesh Puppala et al.
MATERIALS & DESIGN (2014)
Microstructural and texture development in direct laser fabricated IN718
Lakshmi L. Parimi et al.
MATERIALS CHARACTERIZATION (2014)
Corrosion behavior of Hastelloy C22 coating produced by laser cladding in static and cavitation acid solution
Qin-ying Wang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Multi-Response Optimization of Laser-based Powder Deposition of Multi-track Single Layer Hastelloy C-276
Prabu Balu et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Microstructural changes in a laser solid forming Inconel 718 superalloy thin wall in the deposition direction
Fencheng Liu et al.
OPTICS AND LASER TECHNOLOGY (2013)
Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy
Jun Cao et al.
OPTICS AND LASER TECHNOLOGY (2013)
Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures
Chen Hong et al.
OPTICS AND LASER TECHNOLOGY (2013)
Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components
Jon Lambarri et al.
OPTICS AND LASERS IN ENGINEERING (2013)
Laser cladding of Inconel 690 on Inconel 600 superalloy for corrosion protection in nuclear applications
T. Baldridge et al.
OPTICS AND LASERS IN ENGINEERING (2013)
Laser rapid manufacturing on vertical surfaces: Analytical and experimental studies
C. P. Paul et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Micro-structure and mechanical properties of nano-TiC reinforced Inconel 625 deposited using LAAM
G. Bi et al.
LASERS IN MANUFACTURING (LIM 2013) (2013)
Studies on laser rapid manufacturing of cross-thin-walled porous structures of Inconel 625
C. P. Paul et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Effect of heat treatment on microstructure and mechanical properties of laser melting deposited Ni-base superalloy Rene′41
J. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Texture control during laser deposition of nickel-based superalloy
G. P. Dinda et al.
SCRIPTA MATERIALIA (2012)
Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC
J. Michael Wilson et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Evaluation of the mechanical properties of Inconel 718 components built by laser cladding
I. Tabernero et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718
Fencheng Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation
M. Naveed Ahsan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
Fencheng Liu et al.
OPTICS AND LASER TECHNOLOGY (2011)
Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene'41 by laser melting deposition manufacturing
J. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures
P. Ganesh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy
R. J. Moat et al.
ACTA MATERIALIA (2009)
Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability
G. P. Dinda et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
H. Qi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Erosion wear behavior of laser clad surfaces of low carbon austenitic steel
Girish R. Desale et al.
WEAR (2009)
Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire
N. I. S. Hussein et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Fabrication of smart cutting tools with embedded optical fiber sensors using combined laser solid freeform fabrication and moulding techniques
Hamidreza Alemohammad et al.
OPTICS AND LASERS IN ENGINEERING (2007)
Investigating laser rapid manufacturing for Inconel-625 components
C. P. Paul et al.
OPTICS AND LASER TECHNOLOGY (2007)
Laser rapid manufacturing of Colmonoy-6 components
C. P. Paul et al.
OPTICS AND LASERS IN ENGINEERING (2006)
Thermal and microstructural aspects of the laser direct metal deposition of waspaloy
Andrew J. Pinkerton et al.
JOURNAL OF LASER APPLICATIONS (2006)
The mechanical and microstructural characteristics of laser-deposited IN718
PL Blackwell
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy
ML Zhong et al.
SCRIPTA MATERIALIA (2005)
Microstructure and corrosion behavior of high power diode laser deposited Inconel 625 coatings
J Tuominen et al.
JOURNAL OF LASER APPLICATIONS (2003)
分享论文
