相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Drilling Behavior of Flax/Poly(Lactic Acid) Bio-Composite Laminates: An Experimental Investigation
Amirhossein Lotfi et al.
JOURNAL OF NATURAL FIBERS (2020)
Experimental study on drilling of jute fiber reinforced polymer composites
Hadi Rezghi Maleki et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Experimental analysis of drilling induced damage in biocomposites
Antonio Diaz-Alvarez et al.
TEXTILE RESEARCH JOURNAL (2018)
A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials
Meltem Altin Karatas et al.
DEFENCE TECHNOLOGY (2018)
Machinability of natural fiber reinforced composites: a review
Mahmoud M. A. Nassar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Hole making in natural fiber-reinforced polylactic acid laminates: An experimental investigation
Pramendra Kumar Bajpai et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2017)
Measurement and analysis of thrust force in drilling sisal-glass fiber reinforced polymer composites
M. Ramesh et al.
FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING (2017)
A review of recent developments in natural fibre composites and their mechanical performance
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Examination and modification of equivalent delamination factor for assessment of high speed drilling
J. Babu et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Composite materials with bast fibres: Structural, technical, and environmental properties
Michael George et al.
PROGRESS IN MATERIALS SCIENCE (2016)
Comprehensive study on machinability of sustainable and conventional fibre reinforced polymer composites
Sikiru Oluwarotimi Ismail et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2016)
Automated Fiber Placement Head for Manufacturing of Innovative Aerospace Stiffening Structures
Berend Denkena et al.
16TH MACHINING INNOVATIONS CONFERENCE FOR AEROSPACE INDUSTRY - MIC 2016 (2016)
Analysis of damage mechanisms in drilling of composite materials by acoustic emission
Navid Zarif Karimi et al.
COMPOSITE STRUCTURES (2015)
Fibre-matrix Adhesion and Properties Evaluation of Sisal Polymer Composite
Ruhi Haque et al.
FIBERS AND POLYMERS (2015)
Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites
A. A. Abdul Nasir et al.
MEASUREMENT (2015)
A Review of Natural Fibers Used in Biocomposites: Plant, Animal and Regenerated Cellulose Fibers
Sunil Kumar Ramamoorthy et al.
POLYMER REVIEWS (2015)
Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics
F. Chegdani et al.
WEAR (2015)
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Layth Mohammed et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)
A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic Properties
Furqan Ahmad et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Green composites: A review of material attributes and complementary applications
Michael P. M. Dicker et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Novel aligned hemp fibre reinforcement for structural biocomposites: Porosity, water absorption, mechanical performances and viscoelastic behaviour
Behnaz Baghaei et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Flax fibre and its composites - A review
Libo Yan et al.
COMPOSITES PART B-ENGINEERING (2014)
Tensile properties of kenaf fiber and corn husk flour reinforced poly(lactic acid) hybrid bio-composites: Role of aspect ratio of natural fibers
Hyeok-Jin Kwon et al.
COMPOSITES PART B-ENGINEERING (2014)
Experimental Investigation of Mechanical behavior of Jute-Flax Based Glass Fiber Reinforced Composite
B. Vijaya Ramnath et al.
FIBERS AND POLYMERS (2014)
Methodology analysis for evaluation of drilling-induced damage in composites
Duarte Silva et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Progress Report on Natural Fiber Reinforced Composites
Omar Faruk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2014)
Drilling Characteristics of Sisal Fiber-Reinforced Epoxy and Polypropylene Composites
Kishore Debnath et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Investigating the effects of vibration method on ultrasonic-assisted drilling of Al/SiCp metal matrix composites
M. A. Kadivar et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2014)
A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites
Naheed Saba et al.
POLYMERS (2014)
Experimental Study of Surface Roughness of Wood Plastic Composites after Turning
Zuzana Hutyrova et al.
MATERIAL SCIENCE AND ENGINEERING TECHNOLOGY II (2014)
Experimental analysis on delamination damage by acoustic emission in high speed drilling of carbon fiber reinforced plastics
Xiaojiang Cai et al.
ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY XII (2014)
A Review Paper on Effects of Drilling on Glass Fiber Reinforced Plastic
B. V. Kavad et al.
2ND INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING, ICIAME 2014 (2014)
Characterization and optimization of vibration-assisted drilling of fibre reinforced epoxy laminates
A. Sadek et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
A review of modeling and control during drilling of fiber reinforced plastic composites
Amrinder Pal Singh et al.
COMPOSITES PART B-ENGINEERING (2013)
Mechanical and machinability behaviors of woven coir fiber-reinforced polyester composite
S. Jayabal et al.
FIBERS AND POLYMERS (2013)
Drilling of polymer matrix composites: A review
U. A. Khashaba
JOURNAL OF COMPOSITE MATERIALS (2013)
Hole quality evaluation of natural fiber composite using image analysis technique
N. Venkateshwaran et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Drilling behavior of sisal fiber-reinforced polypropylene composite laminates
Pramendra Kumar Bajpai et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Applying ultrasonic vibration to decrease drilling-induced delamination in GFRP laminates
P. Mehbudi et al.
PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)
A review of mechanical drilling for composite laminates
DeFu Liu et al.
COMPOSITE STRUCTURES (2012)
Critical review of recent publications on use of natural composites in infrastructure
David B. Dittenber et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
A digital image analysis to evaluate delamination factor for wind turbine composite laminate blade
V. A. Nagarajan et al.
COMPOSITES PART B-ENGINEERING (2012)
Critical factors on manufacturing processes of natural fibre composites
Mei-po Ho et al.
COMPOSITES PART B-ENGINEERING (2012)
Determining the minimum, critical and maximum fibre content for twisted yarn reinforced plant fibre composites
Darshil U. Shah et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Evaluation of a novel approach to a delamination factor after drilling composite laminates using a core-saw drill
C. C. Tsao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Hemp fiber and its composites - a review
Asim Shahzad
JOURNAL OF COMPOSITE MATERIALS (2012)
Mechanical properties of high density polyethylene reinforced with chemically modified coir fibers: Impact of chemical treatments
F. Z. Arrakhiz et al.
MATERIALS & DESIGN (2012)
Biocomposites reinforced with natural fibers: 2000-2010
Omar Faruk et al.
PROGRESS IN POLYMER SCIENCE (2012)
On the effect of abrasiveness to process equipment using betelnut and glass fibres reinforced polyester composites
Umar Nirmal et al.
WEAR (2012)
Modelling and analysis of thrust force in drilling of GFRP Composites using Response Surface Methodology (RSM)
T. V. Rajamurugan et al.
INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING (2012)
Drilling of composites and resulting surface integrity
E. Brinksmeier et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
A review on the tensile properties of natural fiber reinforced polymer composites
H. Ku et al.
COMPOSITES PART B-ENGINEERING (2011)
Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly(butylene succinate) biodegradable composites
Tran Huu Nam et al.
COMPOSITES PART B-ENGINEERING (2011)
Evaluation of drilling parameters on thrust force in drilling carbon fiber reinforced plastic (CFRP) composite laminates using compound core-special drills
C. C. Tsao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Effect of Stitching Density of Nonwoven Fiber Mat Towards Mechanical Properties of Kenaf Reinforced Epoxy Composites Produced by Resin Transfer Moulding (RTM)
Muhamad Saifuddin Salim et al.
COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2 (2011)
Study of drilling of composite material and aluminium stack
Redouane Zitoune et al.
COMPOSITE STRUCTURES (2010)
Drilling tool geometry evaluation for reinforced composite laminates
Luis Miguel P. Durao et al.
COMPOSITE STRUCTURES (2010)
Effects of processing conditions on the mechanical and water absorption properties of resin transfer moulded kenaf fibre reinforced polyester composite laminates
S. Rassmann et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Machinability analysis in drilling woven GFR/epoxy composites: Part II - Effect of drill wear
U. A. Khashaba et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Optimization of thrust force, torque, and tool wear in drilling of coir fiber-reinforced composites using Nelder-Mead and genetic algorithm methods
S. Jayabal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Modeling and tool wear in drilling of CFRP
D. Iliescu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
EFFECT OF OIL PALM FIBRES VOLUME FRACTION ON MECHANICAL PROPERTIES OF POLYESTER COMPOSITES
B. F. Yousif
INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2010)
Effect of Palm Tree Fiber Orientation on Electrical Properties of Palm Tree Fiber-reinforced Polyester Composites
Ines Ben Amor et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Machinability of glass fibre reinforced plastic (GFRP) composite using alumina-based ceramic cutting tools
M. Adam Khan et al.
Journal of Manufacturing Processes (2010)
Influence of Fibre Orientation on Friction and Sliding Wear Behaviour of Jute Fibre Reinforced Polyester Composite
U. K. Dwivedi et al.
APPLIED COMPOSITE MATERIALS (2009)
Characterization of the dry high speed drilling process of woven composites using Machinability Maps approach
Sanjay Rawat et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Life cycle energy analysis of fiber-reinforced composites
Young S. Song et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
The influence of fibre microstructure on fibre breakage and mechanical properties of natural fibre reinforced polypropylene
Kristiina Oksman et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Studies on Enhancement of Mechanical Properties and Interfacial Adhesion of Flax Reinforced Polypropylene Composites
E. Erasmus et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2009)
Wear mechanisms and tool life management of WC-Co drills during dry high speed drilling of woven carbon fibre composites
Sanjay Rawat et al.
WEAR (2009)
Biofibres and biocomposites
Maya Jacob John et al.
CARBOHYDRATE POLYMERS (2008)
Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor
J. Campos Rubio et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Evaluation of thrust force and surface roughness in drilling composite maternal using Taguchi analysis and neural network
C. C. Tsao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
V. N. Gaitonde et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Experimental study of Nd : YAG laser beam machining - An overview
Avanish Kr. Dubey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Some experimental studies on CO2 laser cutting quality of polymeric materials
J. Paulo Davim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model
S. R. Karnik et al.
MATERIALS & DESIGN (2008)
Prediction and minimization of delamination in drilling of medium-density fiberboard (MDF) using response surface methodology and Taguchi design
V. N. Gaitonde et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites
A. K. Bledzki et al.
EXPRESS POLYMER LETTERS (2007)
Effect of tool wear on delamination in drilling composite materials
C. C. Tsao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2007)
Measuring delamination in carbon/epoxy composites using a shadow moire laser based imaging technique
M. A. Seif et al.
COMPOSITE STRUCTURES (2007)
Effect of point geometry and their influence on thrust and delamination in drilling of polymeric composites
A. Velayudham et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Influence of fibre orientation and volume fraction on the tensile properties of unidirectional Alfa-polyester composite
Sami Ben Brahim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Natural-fiber-reinforced polymer composites applications in automotive
James Holbery et al.
JOM (2006)
Development of flax fibre based textile reinforcements for composite applications
S. Goutianos et al.
APPLIED COMPOSITE MATERIALS (2006)
Effect of-volume fraction of ramie cloth on physical and mechanical properties of ramie cloth/LTP resin composite
Lei Wen et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2006)
The effect of vibratory drilling on hole quality in polymeric composites
S Arul et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Acoustic emission based drill condition monitoring during drilling of glass/phenolic polymeric composite using wavelet packet transform
A Velayudham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Computerized tomography and C-Scan for measuring delamination in the drilling of composite materials using various drills
CC Tsao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
The path towards delamination-free drilling of composite materials
H Hocheng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Evaluation of drilling characteristics of high volume fraction fibre glass reinforced polymeric composite
A Velayudham et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Lignocellulose-based hybrid bilayer laminate composite: Part I - Studies on tensile and impact behavior of oil palm fiber-glass fiber-reinforced epoxy resin
ABA Hariharan et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Factors affecting the machinability of GFR/epoxy composites
I El-Sonbaty et al.
COMPOSITE STRUCTURES (2004)
Taguchi analysis of delamination associated with various drill bits in drilling of composite material
CC Tsao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Design of a drilling torque controller for a machining center
YT Oh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)
Influence of fiber volume fraction and aspect ratio in resol-sisal composites
CN Zárate et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Wavelet transform of acoustic emission signals in failure of model composites
QQ Ni et al.
ENGINEERING FRACTURE MECHANICS (2002)
Finite element modeling of edge trimming fiber reinforced plastics
D Arola et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2002)
分享论文
