期刊
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
卷 35, 期 9, 页码 1817-1824出版社
JOURNAL MATER SCI TECHNOL
DOI: 10.1016/j.jmst.2019.04.017
关键词
Selective laser melting; Laser welding; 304 stainless steel; Anisotropy
资金
- Pre-research Fund Project of Ministry of Equipment and Development of China [61409230301]
- Fundamental Research Funds for the Central Universities [HUST: 2016YXZD005]
- National Natural Science Foundation of China [51805186]
- China Post-doctoral Science Foundation [2017M620317, 2018T110759]
Laser welding is a promising process for joining small components produced by selective laser melting (SLM) to fabricate the large-scale and complex-shaped parts. In the work, the morphology, microstructure. microhardness, tensile properties and corrosion resistance of the laser welded stress-relieved SLMed 304 stainless steel joints are investigated, as the different sections of stress-relieved SLMed 304 stainless steel are joined. Results show that the SLMed 304 stainless steel plates have a good laser weldability. The microstructure of laser-welded joints consists of the cellular dendrites in austenite matrix within columnar grains, exhibiting a coarser dendrite structure. lower microhardness (similar to 220 HV) and tensile properties (tensile strength of similar to 750 MPa, and area reduction of similar to 27.6%), but superior corrosion resistance to those of SLMed plates. The dendrite arm spacing of the joints varies from similar to 3.7 mu m in center zone, to similar to 5.0 mu m in fusion zone, to similar to 2.5 mu m in epitaxial zone. The SLMed anisotropy shows a negligible effect on the microstructure and performance of the laser-welded joints. The laser welding along the building directions of the SLMed base plates can induce a slightly finer dendritic structure and higher tensile properties. (C) 2019 Published by Elsevier Ltd on behalf of The editorial office of journal of Materials Science & Technology.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据