相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Directed and On-Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics
Guo Liang Goh et al.
ADVANCED MATERIALS INTERFACES (2019)
Wearable Bandage-Based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering
Shweta Agarwala et al.
ACS SENSORS (2019)
Single Additive Enables 3D Printing of Highly Loaded Iron Oxide Suspensions
Amin Hodaei et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Electrical Contacts in SOI MEMS Using Aerosol Jet Printing
Behnam Khorramdel et al.
IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY (2018)
Iron Oxide Nanoparticle-Based Magnetic Ink Development for Fully Printed Tunable Radio-Frequency Devices
Mohammad Vaseem et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
Selective laser sintering of inkjet-printed silver nanoparticle inks on paper substrates to achieve highly conductive patterns
Enkeleda Balliu et al.
SCIENTIFIC REPORTS (2018)
Aerosol Jet Printed Strain Sensor: Simulation Studies Analyzing the Effect of Dimension and Design on Performance (September 2018)
Shweta Agarwala et al.
IEEE ACCESS (2018)
Formulation and optimization of a zinc oxide nanoparticle ink for printed electronics applications
K. S. Suganthi et al.
FLEXIBLE AND PRINTED ELECTRONICS (2018)
Enhanced Oxidation-Resistant Cu@Ni Core-Shell Nanoparticles for Printed Flexible Electrodes
Tae Gon Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
A laser curable palladium complex ink used for fabrication of copper pattern on polyimide substrate
Po-Chiang Wang et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)
3D-printable, highly conductive hybrid composites employing chemically-reinforced, complex dimensional fillers and thermoplastic triblock copolymers
Yejin Jo et al.
NANOSCALE (2017)
Gold Nanoparticles as a Direct and Rapid Sensor for Sensitive Analytical Detection of Biogenic Amines
K. M. A. El-Nour et al.
NANOSCALE RESEARCH LETTERS (2017)
Multi-pulse flash light sintering of bimodal Cu nanoparticle-ink for highly conductive printed Cu electrodes
Myeong-Hyeon Yu et al.
NANOTECHNOLOGY (2017)
Development of bendable strain sensor with embedded microchannels using 3D printing
Shweta Agarwala et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
Gold Nanoparticles as a Direct and Rapid Sensor for Sensitive Analytical Detection of Biogenic Amines
K. M. A. El-Nour et al.
NANOSCALE RESEARCH LETTERS (2017)
3D Inkjet Printing of Electronics Using UV Conversion
Ehab Saleh et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
A review: additive manufacturing for active electronic components
Nitipon Saengchairat et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Air stable copper-silver core-shell submicron particles: Synthesis and conductive ink formulation
Anna Pajor-Swierzy et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)
Combined Inkjet Printing and Infrared Sintering of Silver Nanoparticles using a Swathe-by-Swathe and Layer-by-Layer Approach for 3-Dimensional Structures
Jayasheelan Vaithilingam et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Laser sintering of copper nanoparticles on top of silicon substrates
A. Soltani et al.
NANOTECHNOLOGY (2016)
Intensive Plasmonic Flash Light Sintering of Copper Nanoinks Using a Band-Pass Light Filter for Highly Electrically Conductive Electrodes in Printed Electronics
Yeon-Taek Hwang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Inkjet Printing of a Highly Loaded Palladium Ink for Integrated, Low-Cost pH Sensors
Yiheng Qin et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Noble metal-based bimetallic nanoparticles: the effect of the structure on the optical, catalytic and photocatalytic properties
Adriana Zaleska-Medynska et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2016)
The preparation of pH-sensitive Pd catalyst ink for selective electroless deposition of copper on a flexible PET substrate
Po-Chiang Wang et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)
IR-sintering efficiency on inkjet-printed conductive structures on paper substrates
Cristina Gaspar et al.
MICROELECTRONIC ENGINEERING (2016)
Gold nanorods with conjugated polymer ligands: sintering-free conductive inks for printed electronics
B. Reiser et al.
CHEMICAL SCIENCE (2016)
Sintering mechanism of the Cu-Ag core-shell nanoparticle paste at low temperature in ambient air
Yanhong Tian et al.
RSC ADVANCES (2016)
Dispensing of high concentration Ag nano-particles ink for ultra-low resistivity paper-based writing electronics
Fuliang Wang et al.
SCIENTIFIC REPORTS (2016)
Fast sintering of silver nanoparticle and flake layers by infrared module assistance in large area roll-to-roll gravure printing system
Janghoon Park et al.
SCIENTIFIC REPORTS (2016)
A review of printed passive electronic components through fully additive manufacturing methods
H. W. Tan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Inkjet-printed patch antenna emitter for wireless communication application
Guo Liang Goh et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Inkjet Printing of Silver Nanowire Networks
David J. Finn et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Nanoparticles in Photodynamic Therapy
Sasidharan Swarnalatha Lucky et al.
CHEMICAL REVIEWS (2015)
Mechanics of stretchable electronics
J. Song
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2015)
Seed-free synthesis of 1D silver nanowires ink using clove oil (Syzygium Aromaticum) at room temperature
Alagan Jeevika et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)
Cobalt Nanoparticle Inks for Printed High Frequency Applications on Polycarbonate
Mikko Nelo et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Engineering noble metal nanomaterials for environmental applications
Jingguo Li et al.
NANOSCALE (2015)
Cu-Ag core-shell nanoparticles with enhanced oxidation stability for printed electronics
Changsoo Lee et al.
NANOTECHNOLOGY (2015)
Fully-Additive Printed Electronics: Transistor model, process variation and fundamental circuit designs
Xi Zhang et al.
ORGANIC ELECTRONICS (2015)
Production of Oxidation-Resistant Cu-Based Nanoparticles by Wire Explosion
Go Kawamura et al.
SCIENTIFIC REPORTS (2015)
Microwave sintering of Ag-nanoparticle thin films on a polyimide substrate
S. Fujii et al.
AIP ADVANCES (2015)
Printed electronics integrated with paper-based microfluidics: new methodologies for next-generation health care
Gareth Jenkins et al.
MICROFLUIDICS AND NANOFLUIDICS (2015)
Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers
Juha Niittynen et al.
SCIENTIFIC REPORTS (2015)
Optimisation of manufacturing parameters for inkjet-printed and photonically sintered metallic nanoparticle UHF RFID tags
Y. Ren et al.
ELECTRONICS LETTERS (2014)
A Gold Nanoparticle Ink Suitable for the Fabrication of Electrochemical Electrode by Inkjet Printing
Mengmeng Deng et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2014)
Preparation of conductive Cu patterns by directly writing using nano-Cu ink
Wei Li et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
Photosintering and electrical performance of CuO nanoparticle inks
Chantal Paquet et al.
ORGANIC ELECTRONICS (2014)
Fully printed electronics on flexible substrates: High gain amplifiers and DAC
Joseph Chang et al.
ORGANIC ELECTRONICS (2014)
Conductive Nanomaterials for Printed Electronics
Alexander Kamyshny et al.
SMALL (2014)
The effect of poly (N-vinylpyrrolidone) molecular weight on flash light sintering of copper nanopaste
Yoon-Jin Kim et al.
THIN SOLID FILMS (2014)
Flash light sintering of nickel nanoparticles for printed electronics
Sung-Hyeon Park et al.
THIN SOLID FILMS (2014)
A wearable and highly sensitive pressure sensor with ultrathin gold nanowires
Shu Gong et al.
NATURE COMMUNICATIONS (2014)
Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices
Sebastian Wuenscher et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Room Temperature Synthesis of a Copper Ink for the Intense Pulsed Light Sintering of Conductive Copper Films
Ruvini Dharmadasa et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Cu Ion Ink for a Flexible Substrate and Highly Conductive Patterning by Intensive Pulsed Light Sintering
Byung-Yong Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines
Ankit Mahajan et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Novel Application of Platinum Ink for Counter Electrode Preparation in Dye Sensitized Solar Cells
Sang Hern Kim et al.
BULLETIN OF THE KOREAN CHEMICAL SOCIETY (2013)
Printability of functional inks on multilayer curtain coated paper
Roger Bollstrom et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2013)
Miniaturisation of dual band monopole antennas loaded with screen printed cobalt nanoparticle ink
Arun K. Sowpati et al.
IET MICROWAVES ANTENNAS & PROPAGATION (2013)
Rapid low-pressure plasma sintering of inkjet-printed silver nanoparticles for RFID antennas
Franziska M. Wolf et al.
JOURNAL OF MATERIALS RESEARCH (2013)
Novel approaches for low temperature sintering of inkjet-printed inorganic nanoparticles for roll-to-roll (R2R) applications
Jolke Perelaer et al.
JOURNAL OF MATERIALS RESEARCH (2013)
The pH-sensitive Pd nanoparticles as ink for ink-jet printing technology and electroless Cu metallic patterns on indium-doped tin oxide substrate
Chun-Chieh Tseng et al.
THIN SOLID FILMS (2013)
Effects of the morphology of inkjet printed zinc oxide (ZnO) on thin film transistor performance and seeded ZnO nanorod growth
Yen Nan Liang et al.
THIN SOLID FILMS (2013)
Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds
Jolke Perelaer et al.
ADVANCED MATERIALS (2012)
Inkjet Printing of Nanoporous Gold Electrode Arrays on Cellulose Membranes for High-Sensitive Paper-Like Electrochemical Oxygen Sensors Using Ionic Liquid Electrolytes
Chengguo Hu et al.
ANALYTICAL CHEMISTRY (2012)
Core/Shell Nanoparticles: Classes, Properties, Synthesis Mechanisms, Characterization, and Applications
Rajib Ghosh Chaudhuri et al.
CHEMICAL REVIEWS (2012)
Localized atmospheric plasma sintering of inkjet printed silver nanoparticles
Sebastian Wuenscher et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Synthesis and characterization of highly conductive Sn-Ag bimetallic nanoparticles for printed electronics
Yun Hwan Jo et al.
JOURNAL OF NANOPARTICLE RESEARCH (2012)
An Indium Tin Oxide Conductive Network for Flexible Electronics Produced Using a Cotton Template
Peiran Hu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Highly Transparent and Conductive Films of Densely Aligned Ultrathin Au Nanowire Monolayers
Ana Sanchez-Iglesias et al.
NANO LETTERS (2012)
In situ monitoring of flash-light sintering of copper nanoparticle ink for printed electronics
Hyun-Jun Hwang et al.
NANOTECHNOLOGY (2012)
Size matters: gold nanoparticles in targeted cancer drug delivery
Erik C. Dreaden et al.
THERAPEUTIC DELIVERY (2012)
Silver nanoplates as inkjet ink particles for metallization at a low baking temperature of 100°C
Chien-Liang Lee et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Gravure Printing of Conductive Inks on Glass Substrates for Applications in Printed Electronics
Erika Hrehorova et al.
JOURNAL OF DISPLAY TECHNOLOGY (2011)
Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics
Jongeun Ryu et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Sintering of Inkjet-Printed Silver Nanoparticles at Room Temperature Using Intense Pulsed Light
J. S. Kang et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Pulsed light sintering characteristics of inkjet-printed nanosilver films on a polymer substrate
Dong Jun Lee et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2011)
Infra-red assisted sintering of inkjet printed silver tracks on paper substrates
Aurore Denneulin et al.
JOURNAL OF NANOPARTICLE RESEARCH (2011)
Multi-pulsed white light sintering of printed Cu nanoinks
Won-Suk Han et al.
NANOTECHNOLOGY (2011)
Synthesis and characterization of low temperature Sn nanoparticles for the fabrication of highly conductive ink
Yun Hwan Jo et al.
NANOTECHNOLOGY (2011)
Optical and electrical properties of ink-jet printed indium-tin-oxide nanoparticle films
Hsiang-Yu Lai et al.
MATERIALS LETTERS (2011)
Inkjet-printing of indium tin oxide (ITO) films for transparent conducting electrodes
Myun-sung Hwang et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2011)
Pulsed-laser printing of silver nanoparticles ink: control of morphological properties
Ludovic Rapp et al.
OPTICS EXPRESS (2011)
Inkjet printing of transparent, flexible, organic transistors
Laura Basirico et al.
THIN SOLID FILMS (2011)
Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials
Jolke Perelaer et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Preparation of Indium Tin Oxide Inks for Electrically Conductive Transparent Oxide Film with Ink-Jet Printing Method
Jejeong Yu et al.
MOLECULAR CRYSTALS AND LIQUID CRYSTALS (2010)
Characteristics of Printed Thin Films Using Indium Tin Oxide (ITO) Ink
Sung-Jei Hong et al.
MATERIALS TRANSACTIONS (2010)
Printed all-polymer electrochemical transistors on patterned ion conducting membranes
Nikolai Kaihovirta et al.
ORGANIC ELECTRONICS (2010)
On the application potential of gold nanoparticles in nanoelectronics and biomedicine
Melanie Homberger et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
FORMULATION OF SCREEN PRINTABLE COBALT NANOPARTICLE INK FOR HIGH FREQUENCY APPLICATIONS
M. Nelo et al.
PROGRESS IN ELECTROMAGNETICS RESEARCH-PIER (2010)
Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability
Shlomo Magdassi et al.
MATERIALS (2010)
A novel method to produce Pd nanoparticle ink for ink-jet printing technology
Chun-Chieh Tseng et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2009)
Applicability of Metallic Nanoparticle Inks in RFID Applications
Mark L. Allen et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)
Formation of air-stable copper-silver core-shell nanoparticles for inkjet printing
Michael Grouchko et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Ink-Jet Printing of Cu-Ag-Based Highly Conductive Tracks on a Transparent Substrate
Kyoohee Woo et al.
LANGMUIR (2009)
Laser annealing of gold nanoparticles thin film using photothermal effect
Yi-Ting Cheng et al.
MICROELECTRONIC ENGINEERING (2009)
Utility of nonwovens in the production of integrated electrical circuits via printing conductive inks
B. Karaguzel et al.
JOURNAL OF THE TEXTILE INSTITUTE (2008)
Direct writing of copper conductive patterns by ink-jet printing
Bong Kyun Park et al.
THIN SOLID FILMS (2007)
Au nanoparticles target cancer
Prashant K. Jain et al.
NANO TODAY (2007)
The plasmon band in noble metal nanoparticles: an introduction to theory and applications
Audrey Moores et al.
NEW JOURNAL OF CHEMISTRY (2006)
Dispersion and rheology of nickel nanoparticle inks
WJ Tseng et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Size matters: why nanomaterials are different
Emil Roduner
CHEMICAL SOCIETY REVIEWS (2006)
Ring stain effect at room temperature in silver nanoparticles yields high electrical conductivity
S Magdassi et al.
LANGMUIR (2005)
Inkjet printing of nanosized silver colloids
HH Lee et al.
NANOTECHNOLOGY (2005)
High-performance organic thin-film transistors with solution-printed gold contacts
YL Wu et al.
ADVANCED MATERIALS (2005)