相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。The effect of high UV radiation exposure environment on the novel PVC polymers
Emad Yousif et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)
Depolymerization of waste poly(methyl methacrylate) scraps and purification of depolymerized products
Chirag B. Godiya et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)
Interactive effects of solar UV radiation and climate change on material damage
A. L. Andrady et al.
PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES (2019)
Effect of coupling agent modified intumescent flame retardant on the mechanical properties, thermal degradation behavior, and flame retardancy of wood-flour/polypropylene composites
Wen Wang et al.
POLYMER COMPOSITES (2018)
Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis
Fanfan Xu et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Enzymatic degradation of flax-fibers reinforced polylactide
Magdalena Stepczynska et al.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2018)
UV degradation model for polymers and polymer matrix composites
T. Lu et al.
POLYMER DEGRADATION AND STABILITY (2018)
Thermal, thermo-oxidative and thermomechanical degradation of PLA: A comparative study based on rheological, chemical and thermal properties
A. A. Cuadri et al.
POLYMER DEGRADATION AND STABILITY (2018)
Selected properties of polycaprolactone containing natural anti-aging compounds
Krzysztof Moraczewski et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Compatibilization Improves Performance of Biodegradable Biopolymer Composites Without Affecting UV Weathering Characteristics
Nikushi S. Yatigala et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
Selected properties of polylactide containing natural antiaging compounds
Krzysztof Moraczewski et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2018)
Effect of the state of water and relative humidity on ageing of PLA films
J. R. Rocca-Smith et al.
FOOD CHEMISTRY (2017)
Preparation of 3D printable micro/nanocellulose-polylactic acid (MNC/PLA) composite wire rods with high MNC constitution
Zhiguo Wang et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
Thermo-oxidative stabilization of poly(lactic acid)-based nanocomposites through the incorporation of clay with in-built antioxidant activity
Nadka Tzankova Dintcheva et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Degradation of polymer blends: A brief review
F. P. La Mantia et al.
POLYMER DEGRADATION AND STABILITY (2017)
Progress in environmental-friendly polymer nanocomposite material from PLA: Synthesis, processing and applications
Satya P. Dubey et al.
VACUUM (2017)
A novel process for poly(ethylene terephthalate) depolymerization via enzyme-catalyzed glycolysis
Aline Machado de Castro et al.
BIOCHEMICAL ENGINEERING JOURNAL (2017)
Accelerated weathering performance of polylactide and its montmorillonite nanocomposite
Cevdet Kaynak et al.
APPLIED CLAY SCIENCE (2016)
Stability studies of plasma modification effects of polylactide and polycaprolactone surface layers
Krzysztof Moraczewski et al.
APPLIED SURFACE SCIENCE (2016)
Do mechanical and environmental loading have a synergistic effect on the degradation of pultruded glass fiber reinforced polymers?
Mohammad Pour-Ghaz et al.
COMPOSITES PART B-ENGINEERING (2016)
The change in mechanical and interfacial properties of GF and CF reinforced epoxy composites after aging in NaCl solution
Joung-Man Park et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Surface Modification by Low Temperature Plasma: Sterilization of Biodegradable Materials
Magdalena Stepczynska
PLASMA PROCESSES AND POLYMERS (2016)
Water immersion aging of polydicyclopentadiene resin and glass fiber composites
Yinghui Hu et al.
POLYMER DEGRADATION AND STABILITY (2016)
Effect of cut edge area on the migration of BHT from polypropylene film into a food simulant
Yining Xia et al.
POLYMER TESTING (2016)
Review on the thermo-oxidative degradation of polymers during processing and in service
Pieter Gijsman
E-POLYMERS (2014)
Effects of Coffee on the Stability of Accelerated Aged Poly(acrylonitryle-butadiene-styrene)
Piotr Rytlewski et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Influence of the testing conditions on the efficiency and durability of stabilizers against ABS photo-oxidation
R. M. Santos et al.
POLYMER TESTING (2013)
Cytotoxic, cytoprotective and antioxidant effects of isolated phenolic compounds from fresh ginger
Fang Peng et al.
FITOTERAPIA (2012)
Release of synthetic phenolic antioxidants from extruded poly lactic acid (PLA) film
Majid Jamshidian et al.
FOOD CONTROL (2012)
Effect of TiO2 nanoparticles on the long-term hydrolytic degradation behavior of PLA
Yan-Bing Luo et al.
POLYMER DEGRADATION AND STABILITY (2012)
Some composting and biodegradation effects of physically or chemically crosslinked poly(lactic acid)
Marian Zenkiewicz et al.
POLYMER TESTING (2012)
Antioxidant and antilisterial activity of olive oil, cocoa and rosemary extract polyphenols
Marina Bubonja-Sonje et al.
FOOD CHEMISTRY (2011)
Unusual Cold Crystallization Behavior in Physically Aged Poly(L-lactide)
Bing Na et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2011)
Release of butylated hydroxytoluene (BHT) from Poly(lactic acid) films
Heberto Ortiz-Vazquez et al.
POLYMER TESTING (2011)
Accelerated Crystallization of Poly(L-lactide) by Physical Aging
Hideto Tsuji et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Characterization of an antioxidant polylactic acid (PLA) film prepared with α-tocopherol, BHT and polyethylene glycol using film cast extruder
Youngjae Byun et al.
JOURNAL OF FOOD ENGINEERING (2010)
Thermal degradation and crystallisation studies of reactively compatibilised polymer blends
Seno Jose et al.
POLYMER DEGRADATION AND STABILITY (2008)
Effects of mechanical load on the degradation of poly(D,L-lactic acid) foam
Yu-Bo Fan et al.
POLYMER DEGRADATION AND STABILITY (2008)
Processing technologies for poly(lactic acid)
L-T Lim et al.
PROGRESS IN POLYMER SCIENCE (2008)
Metal dicarboxylates as thermal stabilizers for PVC
Yan-Bin Liu et al.
POLYMER DEGRADATION AND STABILITY (2007)
Antioxidant activity of a ginger extract (Zingiber officinale)
I. Stoilova et al.
FOOD CHEMISTRY (2007)
Polymer ageing: physics, chemistry or engineering? Time to reflect
Jim R. White
COMPTES RENDUS CHIMIE (2006)
Polyolefins with controlled environmental degradability
David M. Wiles et al.
POLYMER DEGRADATION AND STABILITY (2006)
Calorimetric analysis of the multiple melting behavior of poly(L-lactic acid)
ML Di Lorenzo
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Effects of irradiation on natural antioxidants of cinnamon (Cinnamomum zeylanicum N.)
ER Kitazuru et al.
RADIATION PHYSICS AND CHEMISTRY (2004)
New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties
SS Ray et al.
POLYMER (2003)
Biodegradation of thermally-oxidized, fragmented low-density polyethylenes
E Chiellini et al.
POLYMER DEGRADATION AND STABILITY (2003)
Proanthocyanidin glycosides and related polyphenols from cacao liquor and their antioxidant effects
T Hatano et al.
PHYTOCHEMISTRY (2002)
Influence of particle size and dissolution conditions on the degradation properties of polylactide-co-glycolide particles
M Dunne et al.
BIOMATERIALS (2000)