相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Novel heat-resistant Al-Si-Ni-Fe alloy manufactured by selective laser melting
Dario Rafael Manca et al.
MATERIALS LETTERS (2019)
Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting
Jeremy H. Rao et al.
SCRIPTA MATERIALIA (2019)
Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg
Amir Hadadzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion
Le Zhou et al.
SCRIPTA MATERIALIA (2019)
The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of A16061 and AlSi10Mg Alloys
Ahmed H. Maamoun et al.
MATERIALS (2019)
Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting
Joseph R. Croteau et al.
ACTA MATERIALIA (2018)
Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures
P. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy
Silvia Marola et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys
Xiaojia Nie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Analysis of processing parameters and characteristics of selective laser melted high strength Al-Cu-Mg alloys: From single tracks to cubic samples
Xiaojia Nie et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Single scan track analyses on aluminium based powders
Alberta Aversa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy
S. Griffiths et al.
MATERIALS CHARACTERIZATION (2018)
Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
Pei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Characterisation of AlScZr and AlErZr alloys processed by rapid laser melting
Qingbo Jia et al.
SCRIPTA MATERIALIA (2018)
Laser Powder Bed Fusion of a High Strength Al-Si-Zn-Mg-Cu Alloy
Alberta Aversa et al.
METALS (2018)
Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys
A. B. Spierings et al.
MATERIALS & DESIGN (2018)
Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing
Syed Z. Uddin et al.
ADDITIVE MANUFACTURING (2018)
Strengthening mechanisms in direct metal laser sintered AlSi10Mg: Comparison between virgin and recycled powders
Amir Hadadzadeh et al.
ADDITIVE MANUFACTURING (2018)
Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
Ming Tang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Laser powder bed fusion of Ti-6Al-4V parts: Thermal modeling and mechanical implications
Mohammad Masoomi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
A study of the microstructure and the mechanical properties of an Al-Si-Ni alloy produced via selective laser melting
Alberta Aversa et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Characterisation of a novel Sc and Zr modified Al-Mg alloy fabricated by selective laser melting
Yunjia Shi et al.
MATERIALS LETTERS (2017)
Selective laser melting of aluminum alloys
Nesma T. Aboulkhair et al.
MRS BULLETIN (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties
Ruidi Li et al.
POWDER TECHNOLOGY (2017)
Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
Hu Zhang et al.
SCRIPTA MATERIALIA (2017)
Effect of Process and Post-Process Conditions on the Mechanical Properties of an A357 Alloy Produced via Laser Powder Bed Fusion
Alberta Aversa et al.
METALS (2017)
Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
A. B. Spierings et al.
MATERIALS & DESIGN (2017)
Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode
Ting Qi et al.
MATERIALS & DESIGN (2017)
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
Francesco Trevisan et al.
MATERIALS (2017)
Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility
X. P. Li et al.
ACTA MATERIALIA (2017)
Microstructure and strength of selectively laser melted AlSi10Mg
J. Wu et al.
ACTA MATERIALIA (2016)
Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting
Adriaan B. Spierings et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy
M. Cabrini et al.
ELECTROCHIMICA ACTA (2016)
Rapid Solidification: Selective Laser Melting of AlSi10Mg
Ming Tang et al.
JOM (2016)
Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction
Dong-Kyu Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Microstructure and phase formation in Al-20Si-5Fe-3Cu-1Mg synthesized by selective laser melting
Pan Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Changing the alloy composition of A17075 for better processability by selective laser melting
Maria L. Montero Sistiaga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
On the formation of A1Si10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties
Nesma T. Aboulkhair et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism
Wei Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Selective laser melting of high strength Al-Cu-Mg alloys: Processing, microstructure and mechanical properties
Hu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Selective laser melting of aluminium and aluminium metal matrix composites: review
T. B. Sercombe et al.
MATERIALS TECHNOLOGY (2016)
Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development
U. Tradowsky et al.
MATERIALS & DESIGN (2016)
Calculation of laser absorption by metal powders in additive manufacturing
C. D. Boley et al.
APPLIED OPTICS (2015)
Selective laser melting of Al-8.5Fe-1.3V-1.7Si alloy: Investigation on the resultant microstructure and hardness
Zheng Lijing et al.
CHINESE JOURNAL OF AERONAUTICS (2015)
Characterization of Al-Fe-V-Si heat-resistant aluminum alloy components fabricated by selective laser melting
Shaobo Sun et al.
JOURNAL OF MATERIALS RESEARCH (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
AlSi12 in-situ alloy formation and residual stress reduction using anchorless selective laser melting
Pratik Vora et al.
ADDITIVE MANUFACTURING (2015)
Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting
K. G. Prashanth et al.
ADDITIVE MANUFACTURING (2015)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
Wayne E. King et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder
Yali Li et al.
MATERIALS & DESIGN (2014)
The role of a low-energy-density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting
X. P. Li et al.
MATERIALS & DESIGN (2014)
Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties
X. P. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Selective Laser Melting of aluminium alloy using a uniform beam profile The paper analyzes the results of laser scanning in Selective Laser Melting using a uniform laser beam
L. E. Loh et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2014)
Design for Additive Manufacturing-Element transitions and aggregated structures
Guido A. O. Adama et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2014)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
Erhard Brandl et al.
MATERIALS & DESIGN (2012)
Selective laser melting of aluminium components
Eleftherios Louvis et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Microstructure and mechanical properties of Al-Si-X alloys fabricated by gas atomization and extrusion process
T. H. Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effect of rapid solidification on the microstructure and mechanical properties of hot-pressed Al-20Si-5Fe alloys
M. Rajabi et al.
MATERIALS CHARACTERIZATION (2009)
The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminium alloy
F. Malek Ghaini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Preparation of semi-solid slurry containing fine and globular particles for wrought aluminum alloy 2024
Guo Hong-min et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2007)
Balling phenomena during direct laser sintering of multi-component Cu-based metal powder
Dongdong Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Transport phenomena and keyhole dynamics during pulsed laser welding
Jun Zhou et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)
Characterization investigations of a melt-spun ternary Al-8Si-5.1Cu (in wt.%) alloy
ML Öveçoglu et al.
MATERIALS LETTERS (2003)
Strengthening mechanisms of an Al-Mg-Sc-Zr alloy
KL Kendig et al.
ACTA MATERIALIA (2002)
Laser melt injection in aluminum alloys: On the role of the oxide skin
JA Vreeling et al.
ACTA MATERIALIA (2000)