相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effect of Plasma Treatment on Mechanical and Thermal Properties of Marble Powder/Epoxy Composites
V. Fiore et al.
POLYMER COMPOSITES (2018)
Effects of corona treatment on morphology and properties of carbon based fillers/epoxy nanocomposites
Hamid Reza Gholshan Tafti et al.
POLYMER COMPOSITES (2018)
TiO2/Halloysite hybrid filler reinforced epoxy nanocomposites
Poornima P. Vijayan et al.
POLYMER COMPOSITES (2018)
Corrosion behavior of PANI/Epoxy/nano SnO2 polymeric nanocomposite coated stainless steel in 3.5 wt% NaCl
S. Zor et al.
POLYMER COMPOSITES (2018)
Facile fabrication of epoxy-TiO2 nanocomposites: A critical analysis of TiO2 impact on mechanical properties and toughening mechanisms
M. S. Goyat et al.
ULTRASONICS SONOCHEMISTRY (2018)
Investigation of properties of nano-silica modified epoxy resin films and composites using RFI technology
Haitao Luo et al.
COMPOSITES PART B-ENGINEERING (2018)
CuO and Ag/CuO nanoparticles: Biosynthesis and antibacterial properties
Nasrin Ghasemi et al.
MATERIALS LETTERS (2017)
Development, characterization, energy storage and interface dielectric properties in SrFe12O19/epoxy nanocomposites
A. Sanida et al.
POLYMER (2017)
Photocatalytic degradation of diazinon under visible light using TiO2/Fe2O3 nanocomposite synthesized by ultrasonic-assisted impregnation method
Seyed Rashid Mirmasoomi et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2017)
Flame retarding epoxy composites with poly(phosphazene-co-bisphenol A)-coated boron nitride to improve thermal conductivity and thermal stability
Taoguang Qu et al.
RSC ADVANCES (2017)
Preparation of functionalized kaolinite/epoxy resin nanocomposites with enhanced thermal properties
Linna Su et al.
APPLIED CLAY SCIENCE (2017)
Investigation of the potential for catalysed thermal recycling in glass fibre reinforced polymer composites by using metal oxides
K. Pender et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Silver decorated copper oxide (Ag@CuO) nanocomposite enhances ROS-mediated bacterial architecture collapse
Mei-Lang Kung et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2017)
Erosion-wear, mechanical and thermal properties of silica filled epoxy nanocomposites
J. Abenojar et al.
COMPOSITES PART B-ENGINEERING (2017)
Enhanced microwave processing of epoxy nanocomposites using carbon black powders
Ranu Pal et al.
ADVANCED POWDER TECHNOLOGY (2017)
Exploration of Epoxy Resins, Hardening Systems, and Epoxy/Carbon Nanotube Composite Designed for High Performance Materials: A Review
Irum Rafique et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2016)
Countering drug resistance, infectious diseases, and sepsis using metal and metal oxides nanoparticles: Current status
Shams Tabrez Khan et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2016)
Synthesis of cysteine, cobalt and copper-doped TiO2 nanophotocatalysts with excellent visible-light-induced photocatalytic activity
Masood Hamadanian et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2016)
Toward high performance epoxy/halloysite nanocomposites: New insights based on rheological, curing, and impact properties
Vahdat Vahedi et al.
MATERIALS & DESIGN (2015)
Improving the fracture toughness and the strength of epoxy using nanomaterials - a review of the current status
N. Domun et al.
NANOSCALE (2015)
Simultaneously enhanced tensile strength and fracture toughness of epoxy resins by a poly(ethylene oxide)-block-carboxyl terminated butadiene-acrylonitrile rubber dilock copolymer
Zhengguang Heng et al.
RSC ADVANCES (2015)
Antibacterial activities of copper nanoparticle-decorated organically modified montmorillonite/epoxy nanocomposites
Gautam Das et al.
APPLIED CLAY SCIENCE (2014)
Tribological performance of carbon nanotube-graphene oxide hybrid/epoxy composites
Xiao-Jun Shen et al.
COMPOSITES PART B-ENGINEERING (2014)
Liquid rubber and silicon carbide nanofiber modified epoxy nanocomposites: Volume shrinkage, cure kinetics and properties
P. Poornima Vijayan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Antimicrobial activity of the metals and metal oxide nanoparticles
Solmaz Maleki Dizaj et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Polyethylene Glycol as an Epoxy Modifier with Extremely High Toughening Effect: Formation of Nanoblend Morphology
Siamak Zavareh et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Poly(lactic acid)/Poly(ethylene glycol) Polymer Nanocomposites: Effects of Graphene Nanoplatelets
Buong Woei Chieng et al.
POLYMERS (2014)
Toxicity of Ag, CuO and ZnO nanoparticles to selected environmentally relevant test organisms and mammalian cells in vitro: a critical review
Olesja Bondarenko et al.
ARCHIVES OF TOXICOLOGY (2013)
Epoxy clay nanocomposites - processing, properties and applications: A review
Asif Abdul Azeez et al.
COMPOSITES PART B-ENGINEERING (2013)
Enhanced mechanical properties of silanized silica nanoparticle attached graphene oxide/epoxy composites
Tongwu Jiang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Interfacial toughening and consequent improvement in fracture toughness of carbon fiber reinforced epoxy resin composites: induced by diblock copolymers
S. H. Deng et al.
EXPRESS POLYMER LETTERS (2013)
Synthesis, Characterization, Photoluminescence and Photocatalytic Properties of CeO2 Nanoparticles by the Sonochemical Method
Parastoo Jamshidi et al.
JOURNAL OF CLUSTER SCIENCE (2013)
Synthesis, characterization and catalytic property of CuO and Ag/CuO nanoparticles for the epoxidation of styrene
Maryam Lashanizadegan et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2013)
Significantly modified tribological performance of epoxy nanocomposites at very low graphene oxide content
Xiao-Jun Shen et al.
POLYMER (2013)
Toughening mechanisms of rubber modified thin film epoxy resins
Hossein Yahyaie et al.
PROGRESS IN ORGANIC COATINGS (2013)
Green Synthesis and Characterization of Silver/Chitosan/Polyethylene Glycol Nanocomposites without any Reducing Agent
Mansor Bin Ahmad et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2011)
Nanoantibiotics: A new paradigm for treating infectious diseases using nanomaterials in the antibiotics resistant era
Ae Jung Huh et al.
JOURNAL OF CONTROLLED RELEASE (2011)
Study on polyethylene glycol/epoxy resin composite as a form-stable phase change material
Yutang Fang et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
Rubber-Toughened Epoxies: A Critical Review
R. Bagheri et al.
POLYMER REVIEWS (2009)
Preparation and catalytic properties of Ag/CuO nano-composites via a new method
Long-Shuo Wang et al.
MATERIALS CHEMISTRY AND PHYSICS (2008)
Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber
Raju Thomas et al.
POLYMER (2008)
Preparation and cryogenic mechanical properties of epoxy resins modified by poly(ethersulfone)
Guo Yang et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2008)
Poly(ether ether ketone) with pendent methyl groups as a toughening agent for amine cured DGEBA epoxy resin
Bejoy Francis et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Study on modification of epoxy resins with acrylate liquid rubber containing pendant epoxy groups
J Kong et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Influence of submicron TiO2 particles on the mechanical properties and fracture characteristics of cured epoxy resin
A. A. Wazzan et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2006)
Hydroxyl terminated poly(ether ether ketone) with pendent methyl group toughened epoxy resin: miscibility, morphology and mechanical properties
B Francis et al.
POLYMER (2005)
Dispersion and alignment of carbon nanotubes in polymer matrix: A review
XL Xie et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
The effect of silica nano particles and rubber particles on the toughness of multiphase thermosetting epoxy polymers
AJ Kinloch et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Epoxy nanocomposites based on the synthetic α-zirconium phosphate layer structure
HJ Sue et al.
CHEMISTRY OF MATERIALS (2004)
Toughening of a trifunctional epoxy system - Part VI. Structure property relationships of the thermoplastic toughened system
RJ Varley et al.
POLYMER (2001)
分享论文
