相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Application of GRA and TOPSIS Optimization Techniques in GTA Welding of 15CDV6 Aerospace Material
L. Srinivasan et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)
Synthesis and characterization of magnesium-based hybrid composites - A review
Suneesh Eacherath et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2018)
Comprehensive studies on processing and characterization of hybrid magnesium composites
E. Suneesh et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Measurement and optimization of performance characteristics in turning of Mg alloy under dry and MQL conditions
R. Viswanathan et al.
MEASUREMENT (2018)
Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning
Mozammel Mia et al.
MEASUREMENT (2018)
Minimization of cutting force, temperature and surface roughness through GRA, TOPSIS and Taguchi techniques in end milling of Mg hybrid MMC
P. M. Gopal et al.
MEASUREMENT (2018)
Application of signal to noise ratio and grey relational analysis to minimize forces and vibrations during precise ball end milling
Szymon Wojciechowski et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Optimization of MQL flow rate for minimum cutting force and surface roughness in end milling of hardened steel (HRC 40)
Mozammel Mia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Optimization of surface roughness and cutting temperature in high-pressure coolant-assisted hard turning using Taguchi method
Mozammel Mia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Mathematical Modelling and Optimization of Cutting Force, Tool Wear and Surface Roughness by Using Artificial Neural Network and Response Surface Methodology in Milling of Ti-6242S
Erol Kilickap et al.
APPLIED SCIENCES-BASEL (2017)
Recent developments in sustainable manufacturing of gears: a review
Kapil Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2016)
The effect of minimum quantity lubrication in the intermittent turning of magnesium based on vibration signals
D. Carou et al.
MEASUREMENT (2016)
Nanostructured BN-Mg composites: features of interface bonding and mechanical properties
Dmitry G. Kvashnin et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)
A note on the use of the minimum quantity lubrication (MQL) system in turning
Diego Carou et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2015)
Development of high performance magnesium composites using Ni50Ti50 metallic glass reinforcement and microwave sintering approach
S. Sankaranarayanan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
A new approach to minimization of the surface roughness and cutting force via fuzzy TOPSIS, multi-objective grey design and RSA
Arif Gok
MEASUREMENT (2015)
Optimization of drilling parameters using Taguchi technique and response surface methodology (RSM) in drilling of AISI 304 steel with cryogenically treated HSS drills
Adem Cicek et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2015)
Nano-AlN particle reinforced Mg composites: microstructural and mechanical properties
S. Sankaranarayanan et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Multi-objective optimization of machining parameters considering energy consumption
Qiulian Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Processing, microstructure and mechanical properties of micro-SiC particles reinforced magnesium matrix composites fabricated by stir casting assisted by ultrasonic treatment processing
X. J. Wang et al.
MATERIALS & DESIGN (2014)
Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts
Turgay Kivak
MEASUREMENT (2014)
Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions
Beni Eker et al.
MECHANIKA (2014)
Comparative analysis of sustainable cooling systems in intermittent turning of magnesium pieces
Eva Maria Rubio et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)
Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications
J. Hirsch et al.
ACTA MATERIALIA (2013)
Optimization of machining parameters on temperature rise in end milling of Al 6063 using response surface methodology and genetic algorithm
P. S. Sivasakthivel et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Experimental Study of the Dry Facing of Magnesium Pieces Based on the Surface Roughness
Eva Maria Rubio et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
Efficient optimisation of machining processes based on technical specifications for surface roughness: application to magnesium pieces in the aerospace industry
Maria Villeta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
S. Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2012)
OPTIMAL MQL AND CUTTING CONDITIONS DETERMINATION FOR DESIRED SURFACE ROUGHNESS IN TURNING OF BRASS USING GENETIC ALGORITHMS
V. N. Gaitonde et al.
MACHINING SCIENCE AND TECHNOLOGY (2012)
Use of Grey-Taguchi Method for the Optimization of Oblique Turning Process of AZ91D Magnesium Alloy
Baris Buldum et al.
MATERIALS TESTING (2012)
Influence of Cutting Speed on Flank Temperature during Face Milling of Magnesium Alloy
Junzhan Hou et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
Surface Finish Optimization of Magnesium Pieces Obtained by Dry Turning Based on Taguchi Techniques and Statistical Tests
M. Villeta et al.
MATERIALS AND MANUFACTURING PROCESSES (2011)
An analytical model to predict specific shear energy in high-speed turning of Inconel 718
R. S. Pawade et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Effect of milling and reinforcement on mechanical properties of nanostructured magnesium composite
Maung Aye Thein et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Enhancing tensile/compressive response of magnesium alloy AZ31 by integrating with Al2O3 nanoparticles
M. Paramsothy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel
D. I. Lalwani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method
Khin Sandar Tun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions
J. Paulo Davim et al.
MATERIALS AND MANUFACTURING PROCESSES (2007)
Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions
J. P. Davim et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Parameter selection based on surface finish in high-speed end-milling using differential evolution
S. Saikumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2006)
Effect of different types of nano-size oxide particulates on microstructural and mechanical properties of elemental Mg
SF Hassan et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Synthesis of nanocrystalline aluminum matrix composites reinforced with in situ devitrified Al-Ni-La amorphous particles
ZH Zhang et al.
SCRIPTA MATERIALIA (2006)
Minimal quantity lubrication in turning: Effect on tool wear
A Attanasio et al.
WEAR (2006)
Development of novel carbon nanotube reinforced magnesium nanocomposites using the powder metallurgy technique
CS Goh et al.
NANOTECHNOLOGY (2006)
Mean flank temperature measurement in high speed dry cutting of magnesium alloy
FZ Fang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Development of hybrid Mg/Al2O3 composites with improved properties using microwave assisted rapid sintering route
WLE Wong et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Development of high performance magnesium nano-composites using nano-Al2O3 as reinforcement
SF Hassan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS
S Opricovic et al.
EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2004)
Development of high performance magnesium nanocomposites using solidification processing route
SF Hassan et al.
MATERIALS SCIENCE AND TECHNOLOGY (2004)
Electric discharge machining of Al-SiC metal matrix composites using rotary tube electrode
B Mohan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Experimental study of surface roughness in slot end milling AL2014-T6
MY Wang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V
SY Hong et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
分享论文
