相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Wear at the taper-trunnion junction of contemporary ceramic-on-ceramic hips shown in a multistation hip simulator
Rohan M. Bhalekar et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
Evaluation of a new methodology to simulate damage and wear of polyethylene hip replacements subjected to edge loading in hip simulator testing
Susan Partridge et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Reducing fretting-initiated crevice corrosion in hip simulator tests using a zirconia-toughened alumina femoral head
Masayuki Kyomoto et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Projections of primary hip arthroplasty in Germany until 2040
Veronika Pilz et al.
ACTA ORTHOPAEDICA (2018)
Effect of Bearing Type on Taper Material Loss in Hips From 1 Manufacturer
Harry S. Hothi et al.
JOURNAL OF ARTHROPLASTY (2018)
Revision for Symptomatic Pseudotumor After Primary Metal-on-Polyethylene Total Hip Arthroplasty with a Standard Femoral Stem
Anders Persson et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2018)
Material loss at the femoral head taper A COMPARISON STUDY OF THE EXETER METAL-ON-POLYETHYLENE AND CONTEMPORARY METAL-ON-METAL TOTAL HIP ARTHROPLASTY
D. J. Langton et al.
BONE & JOINT JOURNAL (2018)
Adverse reactions to metal on polyethylene implants: Highly destructive lesions related to elevated concentration of cobalt and chromium in synovial fluid
Felipe Eltit et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
Highly Cross-Linked Polyethylene Reduces Wear and Revision Rates in Total Hip Arthroplasty A 10-Year Double-Blinded Randomized Controlled Trial
Peter A. Devane et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2017)
A comparison study of stem taper material loss at similar and mixed metal head-neck taper junctions
D. J. Langton et al.
BONE & JOINT JOURNAL (2017)
Clinically insignificant trunnionosis in large- diameter metal-on-polyethylene total hip arthroplasty
H. S. Hothi et al.
BONE & JOINT RESEARCH (2017)
Adverse reactions to metal debris occur with all types of hip replacement not just metal-on-metal hips: a retrospective observational study of 3340 revisions for adverse reactions to metal debris from the National Joint Registry for England, Wales, Northern Ireland and the Isle of Man
Gulraj S. Matharu et al.
BMC MUSCULOSKELETAL DISORDERS (2016)
Ceramic Heads Decrease Metal Release Caused by Head-taper Fretting and Corrosion
Sevi B. Kocagoz et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2016)
Trunnionosis: Does Head Size Affect Fretting and Corrosion in Total Hip Arthroplasty?
Christopher Del Balso et al.
JOURNAL OF ARTHROPLASTY (2016)
Does Taper Size Have an Effect on Taper Damage in Retrieved Metal-on-Polyethylene Total Hip Devices?
Genymphas B. Higgs et al.
JOURNAL OF ARTHROPLASTY (2016)
The biomaterials challenge: A comparison of polyethylene wear using a hip joint simulator
Sauerio Affatato et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings
Murat Ali et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2016)
Highly cross-linked polyethylene decreases the rate of revision of total hip arthroplasty compared with conventional polyethylene at 13 years' follow-up
S. A. Hanna et al.
BONE & JOINT JOURNAL (2016)
The clinical implications of metal debris release from the taper junctions and bearing surfaces of metal-on-metal hip arthroplasty JOINT FLUID AND BLOOD METAL ION CONCENTRATIONS
R. P. Sidaginamale et al.
BONE & JOINT JOURNAL (2016)
Highly cross-linked polyethylene improves wear and mid-term failure rates for young total hip arthroplasty patients
James A. Keeney et al.
HIP INTERNATIONAL (2015)
Serum Metal Ions with a Titanium Modular Neck Total Hip Replacement System
Wade Gofton et al.
JOURNAL OF ARTHROPLASTY (2015)
Metal Ion Concentrations in Young, Active Patients Following Total Hip Arthroplasty with the Use of Modern Bearing Couples
Denis Nam et al.
JOURNAL OF ARTHROPLASTY (2015)
Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system
Timothy M. Brock et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2015)
Influence of stem type on material loss at the metal-on-metal pinnacle taper junction
Harry S. Hothi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2015)
Adverse local tissue reactions in metal-on-polyethylene total hip arthroplasty due to trunnion corrosion THE RISK OF MISDIAGNOSIS
M. R. Whitehouse et al.
BONE & JOINT JOURNAL (2015)
The John Charnley Award: Highly Crosslinked Polyethylene in Total Hip Arthroplasty Decreases Long-term Wear: A Double-blind Randomized Trial
Sion Glyn-Jones et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2015)
Projections of total hip replacement in Sweden from 2013 to 2030
Szilard Nemes et al.
ACTA ORTHOPAEDICA (2014)
Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements
Nader A. Nassif et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2014)
Raised levels of metal ions in the blood in patients who have undergone uncemented metal-on-polyethylene Trident-Accolade total hip replacement
P. Craig et al.
BONE & JOINT JOURNAL (2014)
Pseudotumour Formation Due to Tribocorrosion at the Taper Interface of Large Diameter Metal on Polymer Modular Total Hip Replacements
Richard B. Cook et al.
JOURNAL OF ARTHROPLASTY (2013)
Ten-Year Outcome of Serum Metal Ion Levels After Primary Total Hip Arthroplasty A Concise Follow-up of a Previous Report
Brett R. Levine et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2013)
Wear patterns of taper connections in retrieved large diameter metal-on-metal bearings
Nicholas Bishop et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2013)
Metal Ion Concentrations in Body Fluids after Implantation of Hip Replacements with Metal-on-Metal Bearing - Systematic Review of Clinical and Epidemiological Studies
Albrecht Hartmann et al.
PLOS ONE (2013)
Why does titanium alloy wear cobalt chrome alloy despite lower bulk hardness: A nanoindentation study?
N. Moharrami et al.
THIN SOLID FILMS (2013)
The clinical implications of elevated blood metal ion concentrations in asymptomatic patients with MoM hip resurfacings: a cohort study
David J. Langton et al.
BMJ OPEN (2013)
The Frank Stinchfield Award: Dislocation in Revision THA: Do Large Heads (36 and 40 mm) Result in Reduced Dislocation Rates in a Randomized Clinical Trial?
Donald S. Garbuz et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2012)
Orthopedic implant cobalt-alloy particles produce greater toxicity and inflammatory cytokines than titanium alloy and zirconium alloy-based particles in vitro, in human osteoblasts, fibroblasts, and macrophages
Ali Dalal et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2012)
Corrosion at the Head-Neck Taper as a Cause for Adverse Local Tissue Reactions After Total Hip Arthroplasty
H. John Cooper et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2012)
Large Femoral Heads Decrease the Incidence of Dislocation After Total Hip Arthroplasty A Randomized Controlled Trial
Donald W. Howie et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2012)
Failure rates of stemmed metal-on-metal hip replacements: analysis of data from the National Joint Registry of England and Wales
Alison J. Smith et al.
LANCET (2012)
Taper junction failure in large-diameter metal-on-metal bearings
D. J. Langton et al.
BONE & JOINT RESEARCH (2012)
Effects of bovine serum albumin on the corrosion behaviour of AISI 316L, Co-28Cr-6Mo, and Ti-6Al-4V alloys in phosphate buffered saline solutions
Shima Karimi et al.
CORROSION SCIENCE (2011)
Adverse reaction to metal release from a modular metal-on-polyethylene hip prosthesis
J. U. Lindgren et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2011)
Early failure of metal-on-metal bearings in hip resurfacing and large-diameter total hip replacement A CONSEQUENCE OF EXCESS WEAR
D. J. Langton et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2010)
Wear and creep of highly crosslinked polyethylene against cobalt chrome and ceramic femoral heads
A. L. Galvin et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2010)
Impact magnitudes applied by surgeons and their importance when applying the femoral head onto the Morse taper for total hip arthroplasty
Jake P. Heiney et al.
ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY (2009)
Tribological analysis of failed resurfacing hip prostheses and comparison with clinical data
T. J. Joyce et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2009)
Wear in highly crosslinked polyethylenes
Steven Kurtz et al.
CURRENT ORTHOPAEDICS (2008)
The basis for a second-generation highly cross-linked UHMWPE
John H. Dumbleton et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2006)
A 12-station anatomic hip joint simulator
V Saikko
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2005)
Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions
S Affatato et al.
BIOMATERIALS (2005)
Polyethylene cross-linking by two different methods reduces acetabular liner wear in a hip joint wear simulator
DD D'Lima et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2003)
Biological reactions to wear debris in total joint replacement
E Ingham et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2000)
分享论文
