Single-Dielectric Wideband Partially Reflecting Surface With Variable Reflection Components for Realization of a Compact High-Gain Resonant Cavity Antenna

This communication presents a design methodology for a compact low-cost partially reflecting surface (PRS) for a wideband high-gain resonant cavity antenna (RCA) which requires only a single commercial dielectric slab. The PRS has one nonuniform double-sided printed dielectric, which exhibits a negative transverse-reflection magnitude gradient and, at the same time, a progressive reflection phase gradient over frequency. In addition, a partially shielded cavity is proposed as a method to optimize the directivity bandwidth and the peak directivity of RCAs. A prototype of the PRS was fabricated and tested with a partially shielded cavity, showing good agreement between the predicted and measured results. The measured peak directivity of the antenna is 16.2 dBi at 11.4 GHz with a 3 dB bandwidth of 22%. The measured peak gain and 3 dB gain bandwidth are 15.75 dBi and 21.5%, respectively. The PRS has a radius of 29.25 mm (1.1 lambda(0)) with a thickness of 1.52 mm (0.12 lambda(g)), and the overall height of the antenna is 0.6 lambda(0), where lambda(0) and lambda(g) are the free-space and guided wavelengths at the center frequency of 11.4 GHz.