Toward a Fundamental Understanding of the Lithium Metal Anode in Solid-State Batteries-An Electrochemo-Mechanical Study on the Garnet-Type Solid Electrolyte Li6.25Al0.25La3Zr3O12

For the development of next-generation lithium batteries, major research effort is made to enable a reversible lithium metal anode by the use of solid electrolytes. However, the fundamentals of the solid-solid interface and especially the processes that take place under current load are still not well characterized. By measuring pressure-dependent electrode kinetics, we explore the electrochemo-mechanical behavior of the lithium metal anode on the garnet electrolyte Li6.25Al0.25La3Zr2O12. Because of the stability against reduction in contact with the lithium metal, this serves as an optimal model system for kinetic studies without electrolyte degradation. We show that the interfacial resistance becomes negligibly small and converges to practically 0 Omega.cm(2) at high external pressures of several 100 MPa. To the best of our knowledge, this is the smallest reported interfacial resistance in the literature without the need for any interlayer. We interpret this observation by the concept of constriction resistance and show that the contact geometry in combination with the ionic transport in the solid electrolyte dominates the interfacial contributions for a clean interface in equilibrium. Furthermore, we show that-under anodic operating conditions-the vacancy diffusion limitation in the lithium metal restricts the rate capability of the lithium metal anode because of contact loss caused by vacancy accumulation and the resulting pore formation near the interface. Results of a kinetic model show that the interface remains morphologically stable only when the anodic load does not exceed a critical value of approximately 100 mu Acm(-2), which is not high enough for practical cell setups employing a planar geometry. We highlight that future research on lithium metal anodes on solid electrolytes needs to focus on the transport within and the morphological instability of the metal electrode. Overall, the results help to develop a deeper understanding of the lithium metal anode on solid electrolytes, and the major conclusions are not limited to the Li|Li6.25Al0.25La3Zr2O12 interface.