Zero-Dimensional Cs2TeI6 Perovskite: Solution-Processed Thick Films with High X-ray Sensitivity

We demonstrate a potential candidate, the 0D all-inorganic perovskite material Cs2TeI6, as a sensitive all-inorganic X-ray photoconductor for the development of the new generation of direct photon-to-current conversion flat-panel X-ray imagers. Cs2TeI6 consists of high atomic number elements, has high electrical resistance, and exhibits high air and moisture stability, making it suitable as a sensitive X-ray photoconductor. In addition, we identify that Cs2TeI6 film can be prepared under a low-temperature process using electrostatic-assisted spray technique under atmospheric conditions and achieved resistivity of 4.2 X 10(10) Omega.cm. The resulting air- and water-stable Cs2TeI6 device Controller exhibits a strong photoresponse to X-ray radiation. An electron drift length on the order of 200 mu m is estimated under an applied electrical field strength of 400 V.cm(-1). A high sensitivity for Cs2TeI6 thick film device is realized, with the value of 192 nC.R(-1)cm(-2) under 40 kVp X-rays at an electrical field of 250 V.cm(-1), which is similar to 20 times higher than that of the hybrid 3D perovskite polycrystalline film X-ray detectors. X-ray imaging based on Cs2TeI6 perovskite films will require lower radiation doses in many medical and security check applications.