相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。The cyclic R-curve - Determination, problems, limitations and application
Juergen Maierhofer et al.
ENGINEERING FRACTURE MECHANICS (2018)
Crack growth: Does microstructure play a role?
R. Jones et al.
ENGINEERING FRACTURE MECHANICS (2018)
Defect-correlated fatigue assessment of A356-T6 aluminum cast alloy using computed tomography based Kitagawa-Takahashi diagrams
Jochen Tenkamp et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Statistical analysis of the influence of defects on fatigue life using a Gumbel distribution
K. V. Anderson et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Defect size map for nodular cast iron components with ellipsoidal surface defects based on the defect stress gradient approach
Marton Groza et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
On the role of internal defects in the fatigue damage process of a cast Al-Si-Cu alloy
A. Brueckner-Foit et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Fatigue limit of a cast Al-Si-Mg alloy (A357-T6) with natural casting shrinkages using ASTM standard X-ray inspection
Antonio Rotella et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Application of modified Kitagawa-Takahashi diagram for fatigue strength assessment of cast Al-Si-Cu alloys
Christian Garb et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Casting defects in structural components: Are they all dangerous? A 3D study
I Serrano-Munoz et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Statistical analysis of micropore size distributions in Al-Si castings evaluated by X-ray computed tomography
Christian Garb et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2018)
Fatigue strength characterization of Al-Si cast material incorporating statistical size effect
Roman Aigner et al.
12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018) (2018)
Application of √area-concept to assess fatigue strength of AlSi7Cu0.5Mg casted components
C. Garb et al.
ENGINEERING FRACTURE MECHANICS (2017)
Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200
Martin Leitner et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Creation and characterization of specimen with pores for fatigue tests and castings process simulation
R. M. Hilbinger et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2017)
Location, location & size: defects close to surfaces dominate fatigue crack initiation
Itziar Serrano-Munoz et al.
SCIENTIFIC REPORTS (2017)
On the role of internal defects in the fatigue damage process of a cast Al-Si-Cu alloy
A. Brueckner-Foit et al.
3RD INTERNATIONAL SYMPOSIUM ON FATIGUE DESIGN AND MATERIAL DEFECTS (FDMD 2017) (2017)
Ductile fracture via hydrogen pore mechanism in an aluminum alloy; quantitative microstructural analysis and image-based finite element analysis
Akihide Hosokawa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Influence of casting defect and SDAS on the multiaxial fatigue behaviour of A356-T6 alloy including mean stress effect
Mohamed Iben Houria et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Hardness-strength relationships in the aluminum alloy 7010
M. Tiryakioglu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of heat treatment and Fe content on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys
Hailin Yang et al.
MATERIALS & DESIGN (2015)
Modified NASGRO equation for physically short cracks
J. Maierhofer et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy
Nathalie Limodin et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2014)
Fatigue of an aluminium cast alloy used in the manufacture of automotive engine blocks
Rodrigo Gonzalez et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Effect of T6 heat treatment on the defect susceptibility of fatigue properties to microporosity variations in a low-pressure die-cast A356 alloy
Choong Do Lee
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Material defects as the basis of fatigue design
Yukitaka Murakami
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Characterization of microshrinkage casting defects of Al-Si alloys by X-ray computed tomography and metallography
Gianni Nicoletto et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Effects of T6 heat treatment on the microstructure, tensile properties, and fracture behavior of the modified A356 alloys
Man Zhu et al.
MATERIALS & DESIGN (2012)
Experimental investigation for fatigue strength of a cast aluminium alloy
Rodrigo Gonzalez et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
General relationship between strength and hardness
P. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Compression precracking methods to generate near-threshold fatigue-crack-growth-rate data
J. C. Newman et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
The heat treatment of Al-Si-Cu-Mg casting alloys
Emma Sjolander et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
On the relationship between statistical distributions of defect size and fatigue life in 7050-T7451 thick plate and A356-T6 castings
Murat Tiryakioglu
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Calculation of the S-N curve for cast aluminium alloys based on static tensile test and dendrite arm spacing
H. Stroppe
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2009)
Relationship between Defect Size and Fatigue Life Distributions in Al-7 Pct Si-Mg Alloy Castings
Murat Tiryakioglu
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Castability of aluminium alloys
Marisa Di Sabatino et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2009)
Effect of cooling rate on solidified microstructure and mechanical properties of aluminium-A356 alloy
L. Y. Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Statistical distributions for the size of fatigue-initiating defects in Al-7%Si-0.3%Mg alloy castings: A comparative study
Murat Tiryakioglu
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
On the size distribution of fracture-initiating defects in Al- and Mg-alloy castings
Murat Tiryakioglu
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
The influence of porosity on the fatigue life for sand and permanent mould cast aluminium
Jan Linder et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Microstructure-based fatigue life prediction for cast A356-T6 aluminum-silicon alloys
JZ Yi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2006)
Compression pre-cracking to generate near threshold fatigue-crack-growth rates in two aluminum alloys
J Newman et al.
INTERNATIONAL JOURNAL OF FATIGUE (2005)
Predicting dendrite arm spacing and their effect on microporosity formation in directionally solidified Al-Cu alloy
MLNM Melo et al.
JOURNAL OF MATERIALS SCIENCE (2005)
The effect of porosity on the fatigue life of cast aluminium-silicon alloys
YX Gao et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2004)
A micro-cell model of the effect of microstructure and defects on fatigue resistance in cast aluminum alloys
YX Gao et al.
ACTA MATERIALIA (2004)
Fatigue propagation threshold of short cracks under constant amplitude loading
MD Chapetti
INTERNATIONAL JOURNAL OF FATIGUE (2003)
Effect of microstructure on fatigue behaviour of cast Al-7Si-Mgalloy
G Atxaga et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)