A parametric study of ignition dynamics at ECN Spray A thermochemical conditions using 2D DNS

The ignition process in diesel engines is highly complex and incompletely understood. In the present study, two-dimensional direct numerical simulations are performed to investigate the ignition dynamics and their sensitivity to thermochemical and mixing parameters. The thermochemical and mixing conditions are matched to the benchmark Spray A experiment from the Engine Combustion Network. The results reveal a complex ignition process with overlapping stages of: low-temperature ignition (cool flames), rich premixed ignition, and non-premixed ignition, which are qualitatively consistent with prior experimental and numerical investigations, however, this is the first time that fully-resolved simulations have been reported at the actual Spray A thermochemical condition. Parametric variations are then performed for the Damkohler number Da, oxidiser temperature, oxygen concentration, and peak mixture fraction (a measure of premixedness), to study their effect on the ignition dynamics. It is observed that with both increasing oxidiser temperature and decreasing oxygen concentration, that the cool flame moves to richer mixtures, the overlap in the ignition stages decreases, and the (non-dimensional) time taken to reach a fully burning state increases. With increasing Da, the cool-flame speed is decreased due to lower mean mixing rates, which causes a delayed onset of high-temperature ignition. With increasing peak mixture fraction, the onset of each stage of ignition is not affected, but the overall duration of the ignition increases leading to a longer burn duration. Overall, the results suggest that turbulence-chemistry interactions play a significant role in determining the timing and location in composition space of the entire ignition process. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.